Forensic Engineering Expert Witnesses in Wyoming

This expert is a full professor of Mechanical Engineering at a prominent university in the Western US. He received his PhD in Welding and Materials Engineering from The Ohio State University. Prior to joining academia, he worked as a research assistant at Edison Welding Institute and as a materials engineer at Westinghouse-Power Generation. His research interests are in the area of materials joining, materials characterization, and the relationships between microstructure and mechanical properties.

This highly qualified expert has nearly 25 years of experience in electronic engineering. He received his BS in electrical engineering from the University of California Irvine before earning his PhD in electronics engineering and control systems at the University of Colorado. This expert is a licensed professional engineer. He is active in his field as a member of IEEE and currently holds 3 patents. He has formerly served as a principal engineer for ETO/ASTeX and NeoCore, as well as the chief architect for Xpriori and a researcher in the electrical and computer engineering department of Valdez International. Currently, this expert serves as the COO for an engineering consultancy in Colorado.

This expert has extensive experience in the amusement ride industry. He earned his BS in mechanical and aerospace engineering from Utah State University. He is a licensed structural engineer and professional engineer. He was the engineer of record for two notable commercial amusement rides and has experience in material handling and structural design. Currently, he is the president of an engineering design company that designs amusement park rides.

This highly-qualified expert has extensive experience in industrial and recreational fall protection, as well as the design and manufacturing of personal protective equipment for recreational activities such as rock climbing and mountaineering. He earned his BS in mechanical engineering from Widener University and is certified as a climbing wall instructor program provider and a high angle and confined space rescue technician. He is also Level III with the Society of Professional Rope Access Technicians. This expert is active in his field as a member of the Climbing Wall Association, the American National Standards Institute's Fall Protection Committee, and the American Mountain Guides Association. He has formerly served as a mechanical engineer for the Naval Surface Warfare Center, the senior research engineer for the Harold K. Dunn M.D. Orthopaedic Research Laboratory, and the technical director for Petzl America. Currently, this expert is the vice president of quality for a major mountain sports and climbing equipment manufacturer based in Utah.

This expert has been working in consumer electronics and electrical utilities for over 30 years, and has extensive experience with solar panels, electronics manufacturing, data analytics, semiconductor packaging, and portable electronic products. He earned BS and MS in mechanical engineering from the University of Wisconsin and the University of Rochester, respectively. He holds 4 patents including in low profile managed memory components and high-density electronic connectors. He formerly worked as a director of product marketing at Motion Computing and Staktek and as director of product development at Heliovolt. He also served as a chief technical officer at Pecan Street Incorporated. This expert is currently a chief technical officer and vice president of engineering at a solar energy start-up in CO.

This qualified expert earned both his BS in mathematical and computer sciences as well as mechanical engineering from the Colorado School of Mines. He is a licensed professional engineer in Colorado and California and is certified as a traffic accident reconstructionist, crash data retrieval data analyst and download technician. He is also licensed as a commercial drone remote pilot. He is active in his field as a member of the Society of Automotive Engineers, the National Society of Professional Engineers and the National Association of Professional Accident Reconstruction Specialists. Formerly, this expert served as a mechanical engineering intern at Knott Laboratory and as a project engineer at Ponderosa Associates Ltd. Currently, he serves as an engineer at an accident reconstruction and analysis firm in Colorado where he specializes in the investigation, reconstruction, and analysis of motor vehicle accidents including automobiles, heavy vehicles, bicycles, motorcycles and pedestrian impacts.

This is a highly qualified expert who is capable of reviewing the case at hand. He is highly published and has considerable professional and academic experience in the field of ergonomics and engineering, making him capable of commenting on the potential for negligence on the part of the defendant in this case. The areas in which he has consulted with attorneys may be broadly characterized as those involving issues pertaining to ergonomics/human factors, product safety, and occupational safety. In addition to consulting with attorneys, he teaches the senior level Safety Engineering class and the graduate level Ergonomics class in the Industrial Engineering program at the Pueblo campus of Colorado State University where he is an adjunct professor. He also consults with manufacturers on product safety and with employers of various types on workplace safety.

Expert in rapid transit accident investigation, particularly rolling equipment and motive power, event recordings, track, operations, train handling, and human performance. He retired from the National Transportation Safety Board after 22 years as an investigator-in-charge in which time he participated in 57 major accident investigations, 32 field accident investigations, 10 public hearings, 16 depositions, and 6 special studies.  He wrote 11 major accident reports, 8 field accident reports, and personally conducted 10 sworn depositions. He was responsible for over 157 adopted NTSB safety recommendations in all facets of rail transportation. He previously worked for the Burlington Northern Railroad as a mechanical department manager. After his NTSB retirement, he became Assistant Vice President of Operations, Planning and Analysis for Rail Sciences Inc. As the son of a now 96-year old retired locomotive engineer who had 42 years of service, he grew up in a railroad family and became fascinated with trains and the rail industry, particularly safety.

This highly qualified expert oversees research on the wind resistance of asphalt shingles. He received a Ph.D. in Civil Engineering at the University of Florida. He is a member of the American Association for Wind Engineering. He has published numerous peer-reviewed journal articles on the subject of asphalt shingles including the effects of wind and other environmental factors on the material. He is currently a forensic engineering specialist. Their analysis of construction and design practice is based on Code and industry standards and they have provided over $220 million worth of repair and rehabilitation correcting deficient construction and design issues. This rehabilitation includes single family homes, high rise condominiums, etc.

This board certified forensic engineer earned his BS and MS in Mechanical Engineering and PhD in Technical Science. He is also a fellow of the National Academy of Forensic Engineers and a member of the National Society of Professional Engineers. This expert has published an extensive body of literature in his field, and has given nationally invited lectures and presentations at such prestigious institutions as Johns Hopkins. He has qualified as an expert witness before several state and federal courts. Currently, this expert is the President and CEO at a major engineering research laboratory.

This expert is a world renowned Biomedical Engineer specializing in prosthetics. He received a BA in mathematics and a BAI in microelectronics and electrical engineering from Trinity College Dublin, Ireland, in 1983. After working as a control engineer in England, he moved to the USA and obtained his MS and PhD degrees in biomedical engineering from Northwestern University in Evanston, IL. He has extensive experience working with lower and upper limb prosthetics research. His recent research is focused on the development an artificial hand replacement capable of true dexterous manipulation for use by persons with upper-limb loss. He covers all aspects of the problem ranging from neural control and sensing, mechatronic design and development, novel actuator technologies, and clinical deployment of these systems. He is currently the Director of the Biomechatronics Development Laboratory at a university in CO. He is also a Research Healthcare Scientist for a VA Health Care System, and holds Research Associate Professor appointments in the Departments of Bioengineering and Physical Medicine & Rehabilitation.

This 40+ year veteran of the aviation industry has extensive experience as an airline pilot and additional background in safety inspection, flight instruction, airport management, and accident investigation. He earned his B.S. in Aviation Technology and Business Management from Metropolitan State College and holds several certificates from the FAA, including the Airline Transport Pilot Certificate, the Flight Instructor Certificate, the Flight Engineer Certificate, the Ground Instructor Certificate, and the Control Tower Operator Certificate. The expert spent 16 years as a Line Pilot, Federal Flight Deck Officer, and Pilot Instructor for United Airlines. He has also held operations roles with SurfAir, and FlightOne. He is now an aviation consultant.

This highly qualified expert has 17 years of experience with in-depth Accident Reconstruction analysis. Her specialties include Motor Vehicle Accident Reconstruction for product liability matters. She is experienced collecting and analyzing Event Data Recorders and is currently an Expert at a distinguished Forensic Engineering and Accident Reconstruction firm.

This qualified Fluid Flow Engineering Expert obtained his BSE in Civil Engineering and his MSE and Ph.D in Civil and Environmental Engineering from Utah State University. He is a Certified Engineer in Utah and has published 40+ articles focused on Civil and Environmental Engineering research. He is a member of the American Water Works Association and the American Society of Engineers and is currently a Research Professor in Civil and Environmental at a University in the West, a Civil and Environmental Engineer at a Water Research Laboratory, and a Consultant at a Private Consulting Firm. Expert has provided testimony and technical reports as well as external review of technical reports and analysis.

This expert has spent 35+ years in the mining industry, during which reclamation planning/execution has been a focal point. His experience includes mine and reclamation planning, mine and reclamation plan permitting by way of Environmental Impact Statements (EIS) under the Mineral Leasing Act (MLA) and National Environmental Policy Act (NEPA), implementation of best mining and reclamation practices, mine closure, and historic/legacy mine remediation. He began his own consulting business in 2016 and previously served as the Manager of Mining Projects and Remediation for Agrium USA. The expert is a registered Professional Engineer in Idaho and a member of the Society of Mining Engineers. He earned his B.S. in Mining Engineering from University of Utah and his MSHA trained.

This expert has over 20 of wide-ranging engineering experience. He holds a Ph.D. in Mechanical Engineering from the University of New Mexico and an M.S. in Mechanical Engineering from Utah State University. He has held roles at Sandia National Laboratories in Albuquerque, New Mexico working on earth penetration weapons research and other advanced weapon concepts as well as a leading a hydrokinetic marine turbine manufacturing company. Currently, he is a principal of a roller coaster and amusement ride design consultancy firm. He has been involved in the design of numerous roller coasters and other amusement rides. Prior to forming this consultancy, he served as Chief Engineer for S&S Power, one of the largest and most innovative amusement ride manufacturers in the world. He can speak to finite element analysis, dynamic systems analysis, mechanical design, launch systems, coaster train design, restraint design, pneumatics, hydraulics, data acquisition, data analysis, technical project management, specialty computer programming, and testing in the amusement industry.