Forensic Engineering Expert Witnesses in Mississippi

This expert is a former public-company executive who now consults as a forensic engineer for patents, accidents, and commercial matters. His 40 year career spans industrial, oilfield, and medical interests, both domestic and international. His expertise includes electrical and electronic engineering, industrial computers, and automated control systems. He has qualified several times as an expert witness in US Federal Court, most notably in the Deepwater Horizon / BP oil spill trial.He is specially trained in control systems in a number of industrial aspects, including NFPA 85/ ISA 77 Boiler Control Engineering. He is a licensed electrical engineer, licensed control systems engineer, and a licensed master electrician.

This expert holds a BSCE from the University of South Alabama, and is a licensed professional civil engineer in dozens of states. She is a member of the American Railway Engineering and Maintenance of Way Association, and sits on the advisory board for the University of South Alabama Department of Civil Engineering. This expert has been in the civil engineering and design field for the last 23 years, and is currently the president/project manager/civil engineer at a top engineering firm in Alabama.

This highly credentialed biomedical engineer has significant experience in the design and development of cardiothoracic medical devices. He earned his Master's degree from Georgia Tech and the Emory University School of Medicine; After six years of industry experience he returned to academia and obtained the PhD from the University of Aarhus in Denmark. Then at the Aarhus University Hospital he achieved the Doctor Medicinae (DrMed) degree, which denotes medical research expertise above and beyond a PhD. He is an active member of several scholarly societies in the biomedical field and is a regular reviewer of the Annals of Biomedical Engineering, the Journal of Surgical Research, and Cardiovascular Engineering and Technology. He currently serves on the biomedical engineering faculty of a major Southern university.

This expert is highly fluent in environmental compliance strategies that take into account state and federal environmental regulations and guidances, and the principles of sound engineering practices. His regulatory expertise includes the regulation and enforcement of hazardous waste, superfund and toxic substance laws and UIC regulations. This expert worked in the U.S. Environmental Protection Agency for 31 years and was EPA's RCRA national hazardous waste expert and one of a few who was also a RCRA and Superfund Remedial Project Manager (RPM). Because of his extensive knowledge, he testified as a government witness in federal court proceedings and inspected and evaluated the largest, most difficult hazardous waste sites involving complicated toxicology and environmental site conditions. He directed the Regional RCRA inspection team and personally evaluated industrial sites, including refineries, oil and gas production and treatment facilities, metal refiners, power plants, and waste disposal sites across the Region to determine their compliance with environmental laws. A registered PE and board-certified environmental engineer, this expert helped the EPA develop policies and rules regarding regulatory compliance, risk assessment, site remediation, and worker health issues at waste disposal sites, hospitals, refineries, oil and gas production and power plants. Since retiring from EPA, this expert has had numerous expert witness engagements where he has written several expert reports and participated in various court proceedings.

This expert engineer in mechanical design, engineering simulations, and failure analysis obtained his BSME from Louisiana State University. He is a certified Professional and Forensic Engineer and is a member of the National Society of Professional Engineers, the National Academy of Forensic Engineers and the American Society of Mechanical Engineers. He has 30+ Publications and is currently an Engineering Officer for a government engineering service and is the VP of Engineering for an engineering consulting firm.

This qualified electric shock expert obtained his BS and MS in Bioengineering and Engineering Science from Stanford University and his PhD in Biomedical Engineering from Duke University. He is a Certified Professional Engineer and is a member of multiple engineering and bioengineering associations. The expert has published 75+ articles on electric shock and medical devices. He is an Emeritus Professor of Biomedical Engineering at a top university in the South and remains active as a consultant.

This highly qualified security and risk assessment expert has over 30 years of professional experience. He completed his BS in marketing from Louisiana State University and is a board certified physical security professional. He is a member of various professional organizations, including the American Society for Industrial Security and the National Contract Management Association. Formerly, this expert has held roles as a data communications sales manager at Bell, an access control sales engineer at Cardkey Systems, and as an owner and manager of Card Access Systems. Currently, this expert is a senior systems consultant at an LA security consultancy.

This expert in traffic accident reconstruction has over 35 years of experience as a traffic and transportation engineer. He received his BS in traffic and transportation engineering from the University of Belgrade, his MS in civil engineering from the University of Zagreb, and his PhD in traffic and transportation engineering from the University of Zagreb. He has published four textbooks and over 60 professional publications on topics in transportation engineering. Formerly, he has served as a roadway specialist at the Tennessee Department of Transportation and a transportation planner at Gary Struthers Associates. In addition, this expert has held roles as a leading traffic engineer at CHS Consulting Group and a dean and professor in the college of engineering at Pan-European University. Currently, he is a program and project manager at a major transportation department.

This highly-qualified expert has over 35 years of experience in the field of architecture, construction, and civil engineering. He earned his bachelor of architecture and his master of science in civil engineering from the University of Tennessee, Knoxville. He is a certified construction manager and licensed general contractor and stays active in his field as a member of the American Society of Civil Engineers and Construction Management Association of America. Formerly, this expert held positions as director of engineering services for Tennessee Valley Authority, a regional engineer for the American Institute of Steel Construction, a project manager for Christman Construction and director of new construction and development for Belz Enterprises. He currently owns an independent construction consultancy in Tennessee.

This highly qualified expert has over 20 years of experience in cyber law and security and is a practicing attorney. He earned his BS and MS in information systems from the University of Alabama and Grantham University. This expert then went on to earn his JD from Birmingham Law School and complete two PhD programs: one in management from Walden University and the other in business administration from Northcentral University. He is a member of the privacy and computer crime faction of the American Bar Association. Formerly, he has served as a business analyst for Wachovia, a network engineer with NorthStar Communications, an IT security analyst at Southern Company, and an IT manager with CompUSA. Currently, this expert is an attorney at his own private practice and an adjunct professor of cyber law at five universities.

This expert has over 15 years of experience as an emergency medicine physician. He earned his BS in mechanical engineering from the United States Military Academy and his MD from the University of Mississippi before subsequently completing his residency in emergency medicine at the Morristown Memorial Hospital and his fellowship in critical care medicine at the University of Alabama at Birmingham. He is board certified in emergency medicine and is active in his field as a member of the American College of Emergency Medicine. Before transitioning to the medical field, this expert served in the army for 5 years and spent 6 years working for Swayze and Church as a mechanical engineer. He then went on to work at the University of Alabama at Birmingham, serving as the assistant medical director of critical care transport, an associate professor of emergency medicine, the director of the critical care fellowship, and an attending physician in the surgical intensive care unit. He has also served as the medical director for Pegasus Emergency Group, the regional medical director of the East region for AlignMD, and the medical director of the emergency department at Blount Memorial Hospital. Currently, this expert serves as the co-medical director of the emergency team at a medical school in Alabama and as an attending physician of emergency medicine for a health system in Mississippi.

This highly-qualified expert has 15 years of experience in the field of engineering, with his work focused on mechanical equipment and system failure, as well as material failure analysis. He earned his BS in mechanical engineering from Louisiana Tech University and is licensed as a professional engineer in 6 states and 2 Canadian provinces. He holds several certifications, including certification as a welding inspector, an aerial lift operator, and a forklift operator. This expert is active in his field as a member of the American Society of Mechanical Engineers, the American Society of Plumbing Engineers, and the International Fluid Power Association. He has formerly served as a project coordinator for Cameron International, the responsible engineer at WorleyParsons, a project engineer, forensic engineer, and a fire investigator for EF Consulting. Currently, this expert is a senior forensic engineer for a forensic engineering and failure analysis firm in Louisiana.

This expert has been a practicing engineer for nearly 25 years. A registered Professional Engineer in good standing in 45 states (including Florida), he is a member of several professional engineering societies, as well as the International Sign Association and the Mid-South Sign Association. He has worked for a number of large engineering firms and industrial manufactures, and he currently serves as an Engineering Manager at an engineering firm that is a leader in the sign industry.