Forensic Engineering Expert Witnesses in Texas

This licensed engineer earned his BS in Electrical Engineering from the University of Missouri and is a certified fire & explosion investigator. He has held a number of electrical engineering and products safety positions throughout his career, specializing in EE, product development, technical management, design verification, advanced troubleshooting, and failure analysis. This expert is currently a Senior Professional Engineer at a private Engineering consultancy.

This expert is a Safety Manager/Engineer/Inspector with 20 years of progressive experience and a proven track record implementing safety programs to reduce incidents, improve environments and deliver measurable cost savings. He has a strong background in OSHA, Regulatory and EPA compliance, including advanced training, consulting, and instruction, having worked there for 9 years. He has developed safety policies and procedures during the oversight of more than 110 construction and heavy machinery projects, and has been used as a strategic resource in manufacturing environments through creation of safety management programs. Currently, he is the senior safety consultant at a full service EHS Consultation firm providing safety training , onsite safety staffing, accident investigations and full safety program management and development.

This expert has 38 years experience in Safety Engineering, Loss Prevention & Control, and Accident Investigation & Root Cause Analysis. She has 15 years in OSHA Outreach Training in General Industry and Construction Safety & Health Standards. Additionally, she has consulted with and taught OSHA outreach courses for several State and Federal Agencies, including the Texas Department of Transportation; U.S. Department of the Interior, U.S. Geological Survey; U.S. Department of Labor - Occupational Safety and Health Administration.

This engineering expert has a master's degree in Metallurgical Engineering and a Ph. D. in Industrial Metallurgy. He has worked as a Professor of Mechanical Engineering and Engineering Technology since 1987 and currently is tenured at a public university in North Texas. In addition, he actively consults and has worked on several failure analysis cases as an expert witness in the area of defects in materials, corrosion, materials selection, and manufacturing processes. The expert is a Member of the National Association of Corrosion Engineers and has published 12 research/technical reports.

This qualified Safety Engineer obtained his BS and MS in Chemical Engineering at the Polytechnic Institute of Brooklyn and earned a Doctor of Business Administration with a focus on Organizational Safety. Licensed as a professional engineer in Florida and certified as a safety professional (CSP), he has completed a considerable amount of additional training in OSHA and HAZOPs, fault tree and Root Cause Analysis (RCA). He began his career in chemical safety in 1972 with Industrial Risk Insurers, and ultimately managed risk engineering services for insurance companies such as Zurich, AIG, and others. He has audited hundreds of industrial plants over the course of his career.

This expert specializes in electrical engineering issues, and has performed numerous investigations into fires caused/allegedly caused by electrical issues. His experience includes evaluation of electronics products and their failure modes to determine whether they adhered to relevant safety standards, including those established by Underwriters Laboratories and the Canadian Standards Association. He has also evaluated products and components for structural wiring compliance with the National Electric Code. His projects have included a wide array of products and components, including but not limited to electronics, appliances, HVAC/R, residential and commercial wiring, and battery failure analysis, with an emphasis on lithium ion battery chemistry. He is a licensed Professional Engineer in multiple states, and holds a Certified Fire and Explosion Investigator certification.

This expert is an Assistant Professor of Mechanical Engineering in the Department of Mechanical Engineering at a TX university and a transportation research faculty. She joined the department in 2011 after post-doctoral fellowships at Oak Ridge and Pacific Northwest National Laboratories. She received her Ph.D. from the University of Wisconsin-Madison, and completed her dissertation research in residence in the Fuels, Engines & Emissions Research Group at Oak Ridge National Laboratory. She teaches undergraduate courses in thermodynamics, heat transfer, thermal fluids analysis, engineering ethics, and senior capstone design. She teaches graduate courses in thermodynamics, heat transfer and combustion science. Her research interests are in the area of sustainable energy & environment. Specifically, she studies automotive emissions aftertreatment and remediation of heavy hydrocarbon contamination in soils by applying a suite of chemical and physical characterization techniques.

This well credentialed expert is a Professor and Distinguished Chair in Computer Science for a public university in Texas. He is also Professor Emeritus in the Department of Electrical and Computer Engineering at Cornell University, where he taught and performed research for 20 years. He has about 30 years of professional experience in communication networks, wireless communication, and wireless and mobile networks. The expert earned his Ph.D. in Electrical and Computer Engineering from Stanford University; he also has a B.S. in Electrical Engineering from Technion and an M.S. in the same field from Tel-Aviv University. He has headed the Wireless Networks Lab, an internationally recognized research group at Cornell. The expert has over 200 journal and conference publications. He has been granted 18 patents with 2 additional patents pending. He is a Fellow of the Institute of Electrical and Electronics Engineers (IEEE) and a member of the IEEE's Communications Society, as well as a member of the Association for Computing Machinery (ACM).

This lighting expert earned his Ph.D. in Chemical Engineering from the University of Florida and has been granted 26 U.S. patents, many of which relate to lighting fixtures. From 2008 until 2011, he served as the Vice President of Research at the Lighting Science Group Corp, where he transitioned the company to a product-driven supplier of LED products and helped grow revenues from $3 million to $100 million. He later served as the Chief Engineer of the ETi Lighting Research Institute and the Vice President of Research and Development for ETi Solid State Lighting Inc. He has worked at every stage of LED technology, including raw materials, lighting fixtures, and standards development. The expert currently works as a technology and engineering consultant and also assists on legal matters, primarily patent infringement cases.

This qualified expert is a professional engineer who earned his BS from Texas A&M University and his MBA from the University of Houston. He is an advisory board member of GasPro Americas and the Gas to Liquid Technology Forum. Formerly, this expert has served various roles in the gas industry such as an Energy Consultant for Purvin & Gertz, a Gas Plants Manager for Hess Corporation, a VP at NextEra Energy Resources, and a Gas Processing Instructor at John M. Campbell & Co. Currently, he is a Director and Managing Partner for an energy consulting firm.

This qualified expert earned his BS in Civil Engineering from Southern University A&M and is active in his field as a member of professional organizations such as the Institute of Transportation Engineers, the National Society of Black Engineers, and the American Society of Civil Engineers. He has held several Civil Engineering positions at companies such as Klotz Association and Burk-Kleinpeter, to more senior level engineer project coordinator positions at Parsons Brinckerhoff Construction Services and EJES Inc. Currently, he is a Senior Project Manager at a project manageer that offers engineering and construction management professional services.

This expert on Oil and Gas Engineering has been in the industry for 30+ years. He has experience with engineering, engineering management, and forensic engineering investigations. He possesses a thorough understanding of design, construction, and operational needs. He obtained his BS in Mechanical Engineering from New Mexico State University and his MS in Industrial Engineering from the University of Houston. He is a certified Professional Engineer in TX and is currently a Senior Consultant at a private engineering consultant firm.

This well-qualified expert earned his MS in Mechanical Engineering from the Polytechnic Institute of Bucharest [Romania], his MBA in International Economic Relations from the Academy of Economic Sciences [Romania], and his PhD in Engineering from North Dakota State University. He is active in his field as a member of several professional organizations, including the American Society for Engineering Education, the American Society of Mechanical Engineers, the Society of Automotive Engineers and the American Management Association. This expert has been granted 10 patents as contribution to innovation in his field. Formerly, he was the Vice President of Engineering for PRISM Enterprises, Inc., an Adjunct Professor of Physics, Engineering and Architecture Department at San Antonio College, and a Senior Design Engineer & Project Manager for Kinetic Concepts, Inc. He is currently an Engineering Coordinator for a top college, the Co-Director for a Science & Mathematics Education Program in a top university, as well as an Adjunct Professor in the School of Engineering for a top university.

This qualified expert has years of experience in structural engineering. He received his BS in civil engineering from the University of Kansas before earning his MEng in structural engineering from Texas A&M University. He is a certified professional engineer in 5 states and holds several other structural engineering certifications. He is active in his field as a member of the Structural Engineering Association of Texas and the Building Envelope Enclosure Council. His former positions include project manager for CPH Structural Engineering and adjunct professor at the University of Houston. Currently, this expert is an adjunct professor in construction science at a well-known university in Texas, as well as the manager and principal of a structural engineering firm in Texas.

This highly-qualified expert has nearly 45 years of experience in construction and building codes. He started his career in construction while earning his AA from Eastfield College. He holds over 10 different certifications related to building inspection, including 5 certifications through the International Code Council and a master inspector certification. He is active in his field as a member of the American Society of Home Inspectors, the International Association of Certified Home Inspectors, the International Code Council, and the North American Deck and Rail Association. For over 20 years, he worked as a general construction contractor for General Contracting in Dallas. Currently, this expert serves as a professional residential building inspector for a building inspection company in Texas.

This highly-qualified expert has over 35 years of experience in HVAC and plumbing design. He earned his BS in mechanical engineering from Texas Tech University. He's active in his field as a member of several organizations, including the Academy of Mechanical Engineers and the American Society of Heating, Refrigerating and Air Conditioning. This expert is a licensed professional engineer in 16 states. He has formerly served as a project engineer, principal, and secretary/treasurer for Fanning, Fanning, & Associates. Some notable projects he has worked on with Fanning, Fanning, & Associates include the El Paso Medical Education Building at Texas Tech University and the USDA Cotton Classing Lab. Currently, this expert is the president of an engineering consulting firm based in Texas.

This highly qualified expert earned his BS in chemical engineering from the University of Texas followed by a JD from Thurgood Marshall School of Law. He also earned his LLM with diplomas in energy, environmental, and natural resources law, intellectual property and information law, and taxation. He is an expert in environmental and energy law, engineering, and safety. This expert formerly served as a regional engineer, division director, and regional director of the Texas Control Board which is now known as the Texas Commission on Environmental Quality. Currently, this expert serves as an engineering manager for an air and waste engineering company in Texas, as well as an environmental and intellectual property attorney.

This highly qualified expert has over 15 years of experience specializing in the electro-mechanical systems in medical devices. Specifically, this expert specializes in oxygen concentrators, oxygen conserving devices, breathe detection, power circuit design, instrumentation, and sensing. He earned his BS in electrical engineering from Northwestern and his MBA from Kellogg Graduate School of Management and has his six sigma black belt certification. He has held several roles including VP of engineering at Joslyn Hi-Voltage, director of electrical engineering at Baxter Healthcare and director of device risk management at Hospira. This expert also served as the director of global respiratory engineering in the home medical equipment division of Invacare. Currently, this expert owns a consultancy focused on the medical device product development in TX.

This expert received his BS in electrical engineering from the University of Puerto Rico, graduating magna cum laude. He also earned a business marketing certificate from Collin Co Community College and completed the Bussmann consulting engineering training. He is a licensed professional engineer and has been a LEED accredited professional for over 10 years. He holds more than 20 years of experience in the design and construction of power distribution, lighting, fire alarms, and electrical safety issues. The projects he has worked on have involved city infrastructure, high and medium voltage substations, education facilities, and health care facilities. This expert currently is the senior electrical engineer of an electrical safety company in Texas.

This expert has over two decades of experience in the field of quality and manufacturing processes, specializing in automotive vehicles and their components. She received her BS in chemical engineering from the University of Waterloo and then became a process engineer at Woodbridge Foam. Afterward, she worked as a quality engineer at Estee Lauder Corporation, a project manager for ATS Automation Tooling Systems, and then as the assistant manager of quality engineering at Toyota Motor Manufacturing Canada, where her primary role was to ensure accurate root cause analysis on completed vehicle or sub-component quality problems related to customer-use, manufacturing, or design-related issues. She then became the director of global quality for valve and pipes manufacturing at Crane ChemPharma & Energy, where she was responsible for implementing Global Standard Quality Processes to manage in-house and supplier manufacturing. Currently, she owns a private consulting firm in Texas.

This expert earned his BS in civil engineering at Ohio State University and his MBA at the University of Dallas. He is a professional engineer and has worked in roles such as plant manager of Rowe Machinery, senior program director at Raytheon, the director of the Asia-Pacific maritime program and senior director of air force and commercial programs for L-3Harris, as well as vice president of integrated aviation solutions at BAE Systems. He is currently the principal at an aerospace and defense consulting company in Texas.

This highly-qualified expert is an MIT-trained engineer specialized in mechanical engineering, process engineering, oil and gas, flow assurance, and thermal-hydraulics with 40 years of experience in his field. After graduating from the industrial engineer program at the Universidad Católica Andrés Bello in Venezuela, he went on to study at MIT, earning an MSc, an ME, and a PhD. He is a licensed professional engineer in the state of Texas and is a Bechtel-certified engineering supervisor and project engineering manager, as well as a Bechtel distinguished engineer. This expert is active in his field as a member of several organizations, including the Society of Petroleum Engineers, the American Society of Mechanical Engineers, and the American Society of Heating, Refrigerating and Air-Conditioning Engineers. He worked as an engineer for several firms in Venezuela for over 25 years before moving to the United States to serve as BP America's process engineering team coordinator. He then went on to serve as a process engineering manager for Jacobs Engineering and a flow assurance manager for both Technip and Bechtel Engineering. He has received several honors and awards for his work, including being the first Hispanic recipient of the Madam Curie Research Grant. Currently, this expert serves as the president of a mechanical, process, and flow assurance engineering consulting firm in Texas.

This expert has over 30 years of experience working in the toxicology and health risk assessment field. He specializes in evaluating potential human health effects of chemical and microbial agent exposures. In particular, he has experience with evaluation of exposures to asbestos, benzene, carbon monoxide, silica, metals, pesticides, solvents, oil and gas fracking chemicals, other petroleum products, and toxic gases. Additionally, he is a Board-Certified Toxicologist as a Diplomate of the American Board of Toxicology and a Licensed Professional Engineer. Currently, this expert is a toxicologist at a privately owned toxicology and human health risk assessment firm.

This expert has over 40 years of experience in engineering and construction, with more than 35 years of experience in the field of natural gas and propane incidents, pipeline construction and operation, and water and sewer systems. He is currently the president of a reputable forensic engineering and failure analysis company. His primary areas of expertise include residential, commercial and industrial natural gas and LP gas fires, explosions and carbon monoxide incidents. He has experience with gas processing plants, regulator stations, compressor stations, and other facilities and has conducted numerous investigations and has testified about issues at these types of facilities. He has investigated many carbon monoxide incidents and has conducted major carbon monoxide testing programs throughout the country. He has a great deal of experience and has testified on numerous occasions regarding carbon monoxide issues.

This well seasoned former senior engineering associate at Exxon Chemical has almost 60 years of experience in manufacturing of olefin based polymers. During his time at Exxon he was the technical start up leader for a multi-million dollar polypropylene project. In 1994 he founded his own polymers and process engineering consulting company where he has worked with several Fortune 500 companies on process development and scale up, process design, plant problem solving and training. He has authored two books on process engineering as well as developing a five day training course to cover problem solving concepts.

This expert has over 35 years of experience in construction engineering. His research includes construction claims, construction safety, alternative energy technology, and waste disposal technology. He has served as Principal Engineer for various companies and, subsequently, legal counsel after receiving his J.D. In addition to serving as President of a consulting engineering company, he currently serves as Professor of Civil and Environmental Engineering as well as Director of Construction Management for a university.

This highly qualified chemical engineer has more than 40 years of experience in the design and operation of petroleum refineries, oil terminals, and petrochemical plants. Much of his work originates at executing process simulators, including simulations in petroleum refining, ethylene, fine chemicals, reforming processes, dehydration, distillation, and gas processing. For the past 30+ years, this expert has been the President, Owner, and Engineering Manager for a large chemical process design firm that analyzes chemical processes, petrochemical plant safety, and a variety of facets in the industry.

This expert has been working with floating drilling and production vessels for over 40 years. He completed his undergraduate studies in Civil Engineering in Hong Kong prior to earning an M.S. and Ph.D. in Structural Engineering from the University of Houston. He began his career as a Design Engineer and Computer Specialist with The Offshore Company, where for 6 years he performed analyses for the design and operation of floating drilling vessels, including conducting mooring and riser analyses. He then joined Exxon's upstream research affiliate Exxon Production Research Company, where he worked for 22 years. As a Senior Research Specialist in their Offshore Division, this expert conducted research in the areas of mooring and risers and provided technical support to Exxon's offshore operations worldwide, while he also taught internal training courses on mooring and riser systems. Furthermore he has been teaching mooring short courses at the University of Texas and in Singapore. He was the recipient of awards and honors such as the American Petroleum Institute's Citation for Distinguished Meritorious Service, DeepStar's Outstanding Contribution Award, and Who's Who in the South and Southwest. He was the chairman of API Mooring Resources Group for 24 years (1982-2006) responsible for the development of API RP 2SK (mooring design), API RP 2I (mooring inspection), and API RP 2SM (fiber rope mooring). He also played a key role in the development of the International Organization for Standardization (ISO) mooring codes, which required a thorough understanding of both American and European mooring codes. Currently, this expert is a Technical Advisor for a private offshore industry consulting group, as well as an independent consultant to the offshore industry. Some of his activities in these roles have included writing mooring standards for Chevron, revising the American Bureau of Shipping Guidance Notes on Application of Fiber Rope for Offshore Mooring, and directing a joint industry project on Arctic mooring systems. He has served as a mooring expert in 7 litigation processes concerning mooring failures.

This highly experienced biomedical engineer has directed comprehensive hospital-based biomedical engineering department at the largest medical center in the country, taught at both medical and technical post-secondary institutions, including the Baylor College of Medicine, West Virginia University, and a prominent Mexican university. He earned his undergraduate and graduate degrees in electrical engineering from West Virginia University. He is a licensed Professional Engineer and certified as a Clinical Engineer. He is member of technical standards writing bodies, and is widely published in his field and his expertise is frequently sought by hospitals, manufacturers, and litigators. He received numerous professional awards including the FDA Commissioner, Special Citation for protecting the public safety.

This expert is a graduate of Texas A&M University with a bachelor's degree in petroleum engineering. He has comprehensive hands-on experience in drilling and production operations both onshore and offshore. His background, with major oil companies and independent producers, includes direct responsibility for drilling, production, equipment selection, facility design, and more. He has held top positions at such companies as Comstock Resources, Nexen Petroleum, and Hunt Exploration. Currently, this expert is a Senior Petroleum Engineering Consultant at a private firm.

This qualified expert obtained her BS in Psychology and her MS in Applied Psychology/Human Factors Engineering from Clemson University and her MBA from Northeastern. She is Board Certified in Professional Ergonomics and is a member of the Human Factors and Ergonomics Society. She is currently a CEO at a Private Consulting Firm and a Director on the Board for Certification in Professional Ergonomics.

This PVC industry veteran was with the Uni-Bell PVC Pipe Association, North America's PVC pipe manufacturers association, from 1978 until 2008. He is also currently the Chair a sustainablility committee in the American Water Works Association, where he has been a Member since 1979. The expert is a Member of ASTM International, the North American Society For Trenchless Technology, and the Pipelines unit of the American Society of Civil Engineers. He now works as a Vice President for a water, sewer and conduit PVC pipe supplier. He is licensed as a Professional Engineer in Ohio and Texas.