Forensic Engineering Expert Witnesses in New Jersey

This EDR expert is a principal at a vehicular accident reconstruction consultancy. He retired from law enforcement after a twenty-five year career, during which time he investigated over 2500 motor vehicle collisions. Fourteen of those years he served with the Bergen County (NJ) Prosecutor's Office Fatal Accident Investigation Unit. This expert earned a degree in mechanical engineering, summa cum laude, from the New Jersey Institute of Technology and he is ACTAR accredited. He has testified as an expert in depositions and trials. He participates in crash testing with the University of Tulsa Crash Reconstruction Research Consortium and the University of North Florida. This expert teaches advanced accident reconstruction classes and lectures throughout the country at accident reconstruction conferences. He has performed more than 100 EDR downloads.

This supremely qualified Expert of Mechanical Engineering and biomechanics obtained his MS and PhD in Mechanical Engineering from Michigan State University. He is a Certified Manufacturing Engineer and a Licensed Professional Engineer. He is a Fellow and member of the American Society of Mechanical and the Society of Manufacturing Engineers. He has 175+ Publications on Mechanical Engineering and is Currently the Professor of Mechanical Engineering at a New York College and is the Founder and Director of an Engineering Design Firm with over thirty years of academia, industrial and expert witness experience.

This Forensic Architect assists attorneys and insurance companies in resolving construction litigation claims through physical investigation, analysis, report writing and expert witness testimony. He is a Registered Architect and a Professional Planner with 28 years of experience in the construction industry. He has an ability to explain complex design and construction issues in a simple and clear manner as an expert witness. He has testified in deposition, mediation, arbitration and Court. This expert actively consults on construction claims for defects, delays, and errors & omissions. He earned his Bachelor of Architecture from the New Jersey Institute of Technology and is currently licensed in New York, New Jersey, Pennsylvania, Rhode Island, Washington D.C. and Florida. The expert is also a Professional Planner in New Jersey and has an NCARB Certificate from the National Council of Architectural Registration Boards. He has completed analysis on numerous projects, including condominium complexes, schools, healthcare facilities, and resort properties, among others. He was a Claims Department Head and a Senior Architect for The Falcon Group before starting his current role as a Forensic Architect at a firm in New Jersey. After graduating from high school, this expert worked for a contractor performing construction trades. After graduating with a Bachelor of Architecture degree from NJIT, he worked for several Architectural firms. He decided to concentrate on Forensic Architecture and has worked for Claims firms such as Hill International. He has been primarily focused on Forensic work for the past 12 years. This expert has written numerous expert reports and has testified in arbitration, a bench trial and a jury trial.

This highly qualified expert is an electrical engineer by training with forensic experience in electronic communications and control systems. He has 40 years of industry experience and has authored 20+ peer-reviewed technical publications. This expert has extensive expert witness experience in cases involving mobile telephone systems, electronic surveillance systems, industrial machinery, and automotive electronics. Currently, he operates a forensic engineering consultancy specializing in electrical devices and electronic systems. His geographic area is the eastern USA.

This expert has 35+ years of experience in the New Jersey residential construction industry, from simple renovations to multi-million dollar custom homes. He is licensed by the State of New Jersey as a home builder, home remodeler, and building inspector. As a consultant, he has conducted inspections for municipal governments and homeowner associations; he has also been recognized as an expert by the Monmouth Country Superior Court.

This biomedical engineer specializes in materials science and biomechanics. He earned his B.S. and Ph.D. from New Jersey Institute of Technology, where he also served as a Postdoctoral Research Scientist overseeing the development and execution of experiments measuring neuronal activity after traumatic brain injuries. The expert is now an Adjunct Professor in Biomedical Engineering departments at two New Jersey higher education institutions.

This highly qualified professional engineer earned a BS at Seton Hall University, an MS in Electrical Engineering at University of Maryland, an MS in Business Management at Florida Institute of Technology, and a PhD in Electrical Engineering at the New Jersey Institute of Technology. He specializes in audits, programs, and training for electrical safety, as well as compliance review and testing for product safety. He has reviewed a number of cases involving electrical/battery fires, electrocution/electrical accidents, lightning, and safety. He belongs to a number of prestigious institutions in the electrical engineering field, and currently serves as the principal consulting engineer at his own private engineering and consultancy firm.

This engineering expert obtained his BS in Civil Engineering, with a specialization in Construction Management, and his MS in Structural Engineering from Stevens Institute of Technology. He is licensed as a Professional Engineer and a Structural Engineer in over 25 states and is certified by the Structural Engineering Certification Board. He is a member of ASCE, ACI, AISC and a Fellow of SEI. He serves as Chair of the ASCE SEI Business Practices Committee. He also serves on the Board of Trustees for Stevens Institute of Technology and the Board of Governors of the Structural Engineering Institute. He has 6 publications and is currently the Principal Engineer for a structural and forensic engineering firm.

This high-qualified expert has nearly 50 years of experience in the field of construction. He earned his BS from Monmouth College, is a certified EPA renovator, and is licensed as a new home builder, home improvement contractor, construction code official, building sub-code official, and a residential, commercial, industrial, and high rise/high hazard specialist. This expert is active in his field as a member of the Bergen/Passaic Municipal Inspectors Association and the New Jersey Business and Industry Association. He formerly served as a construction code official for the Township of Washington in Bergen County and a building sub-code official for the Borough of Paramus, both in New Jersey. Since 1973, this expert has owned and operated a construction company based in New Jersey.

This expert has over 30 years of experience in the medical device industry, with broad expertise in cardiovascular and endovascular fields with a focus on percutaneous catheters, heart assist devices, brain and aortic aneurysm treatment, and vascular closure products. He earned his MS in mechanical engineering at Moscow State Technical University and worked as the lead engineer at the Scientific Institute for Transplantology and Artificial Organs before moving to the United States. He is a registered patent agent through the US Patent and Trademark Office and is a member of the Association of University Technology Managers, the International Society for Rotary Blood Pumps, and the American Society for Artificial Internal Organs. He formerly served as the scientific director and vice president of technology at Datascope Corp. before he served as the CTO of Cerus Endovascular. This expert is currently the principal of a patent consulting company, the founder of a medical technology development company, and the vice president of product development for a medical device start-up in New Jersey.

This qualified computer science expert earned his BS in physics and computer science from Rutgers University before earning his MS in computer science from Georgia Institute of Technology. He has experience with several programming languages and software programs, including Python, Java, and Amazon Web Services. He formerly served as a software engineer for CSF Corporation. Currently, this expert serves as the co-founder and CTO of a community assistance non-profit based in New Jersey, as well as a venture associate for a venture capital firm and a developer evangelist and a venture startup mentor for an enterprise software firm, both based in New York.

This highly-qualified expert has over 30 years of experience in engineering and construction management, specializing in avoiding, minimizing, or resolving problems that may evolve during the design and construction process. He earned his BS in civil engineering from Drexel University and is licensed in 15 states as a registered professional engineer. He is active in his field as a member of the American Society of Civil Engineers and the Associated General Contractors of America. He has formerly served as an engineer for Kiewit Eastern Co. and as a consultant for Arkhon Corporation. He has led management and risk audits, the development of project controls, and risk assessments of public and private projects, and has experience with various aspects of construction including contract preparation, field monitoring and inspection, budget assessments, termination and damage calculations, and claims analysis involving schedule delay, disruption and acceleration. Currently, this expert is a principal for a construction management consulting firm.

This expert received his Masters degree in 1997 at McMaster University and in 2004, he was awarded his PhD from Carleton University. His PhD contribution resulted in significant changes in the 2005 National Building Code of Canada, NBCC. During his graduate studies, he taught several courses including Engineering Mechanics, Surveying, Highway and Transportation, Bridge Design, and Properties of Material. He joined Alfred Benesch & Company, a consulting company in the US, as a lead bridge engineer. He gained over seven years of bridge design experience. He has wide experience in bridge rehabilitation and design, and is knowledgeable in American Association of State Highway and Transportation Officials (AASHTO), and Federal Highway Association (FHWA) policies and design standards. His personal experience includes highway bridge analysis and design, rehabilitation and construction, and scour analysis for bridges.