Technical Expert Witnesses in Oklahoma

This highly experienced biomedical engineer has directed comprehensive hospital-based biomedical engineering department at the largest medical center in the country, taught at both medical and technical post-secondary institutions, including the Baylor College of Medicine, West Virginia University, and a prominent Mexican university. He earned his undergraduate and graduate degrees in electrical engineering from West Virginia University. He is a licensed Professional Engineer and certified as a Clinical Engineer. He is member of technical standards writing bodies, and is widely published in his field and his expertise is frequently sought by hospitals, manufacturers, and litigators. He received numerous professional awards including the FDA Commissioner, Special Citation for protecting the public safety.

This highly qualified expert has been in the beverage packaging industry for 15+ years where she has specialized in failure analysis of defective packaging. She has both a BA and MA in Engineering, Polymer/Macromolecular Science from Case Western University and serves as Packaging Committee Chair for the International Society of Beverage Technologists She formerly served as a Senior Packaging Engineer for Dr Pepper Snapple group where her primary responsibility was the analysis of packaging related consumer complaints. This included plastic and glass bottles, caps, cans and other beverage related packaging. Currently, she serves as Principal Consultant at a materials engineering and packaging firm.

This expert is a graduate of Texas A&M University with a bachelor's degree in petroleum engineering. He has comprehensive hands-on experience in drilling and production operations both onshore and offshore. His background, with major oil companies and independent producers, includes direct responsibility for drilling, production, equipment selection, facility design, and more. He has held top positions at such companies as Comstock Resources, Nexen Petroleum, and Hunt Exploration. Currently, this expert is a Senior Petroleum Engineering Consultant at a private firm.

This expert is a world renowned Biomedical Engineer specializing in prosthetics. He received a BA in mathematics and a BAI in microelectronics and electrical engineering from Trinity College Dublin, Ireland, in 1983. After working as a control engineer in England, he moved to the USA and obtained his MS and PhD degrees in biomedical engineering from Northwestern University in Evanston, IL. He has extensive experience working with lower and upper limb prosthetics research. His recent research is focused on the development an artificial hand replacement capable of true dexterous manipulation for use by persons with upper-limb loss. He covers all aspects of the problem ranging from neural control and sensing, mechatronic design and development, novel actuator technologies, and clinical deployment of these systems. He is currently the Director of the Biomechatronics Development Laboratory at a university in CO. He is also a Research Healthcare Scientist for a VA Health Care System, and holds Research Associate Professor appointments in the Departments of Bioengineering and Physical Medicine & Rehabilitation.

This qualified expert obtained her BS in Psychology and her MS in Applied Psychology/Human Factors Engineering from Clemson University and her MBA from Northeastern. She is Board Certified in Professional Ergonomics and is a member of the Human Factors and Ergonomics Society. She is currently a CEO at a Private Consulting Firm and a Director on the Board for Certification in Professional Ergonomics.

This 40+ year veteran of the aviation industry has extensive experience as an airline pilot and additional background in safety inspection, flight instruction, airport management, and accident investigation. He earned his B.S. in Aviation Technology and Business Management from Metropolitan State College and holds several certificates from the FAA, including the Airline Transport Pilot Certificate, the Flight Instructor Certificate, the Flight Engineer Certificate, the Ground Instructor Certificate, and the Control Tower Operator Certificate. The expert spent 16 years as a Line Pilot, Federal Flight Deck Officer, and Pilot Instructor for United Airlines. He has also held operations roles with SurfAir, and FlightOne. He is now an aviation consultant.

This PVC industry veteran was with the Uni-Bell PVC Pipe Association, North America's PVC pipe manufacturers association, from 1978 until 2008. He is also currently the Chair a sustainablility committee in the American Water Works Association, where he has been a Member since 1979. The expert is a Member of ASTM International, the North American Society For Trenchless Technology, and the Pipelines unit of the American Society of Civil Engineers. He now works as a Vice President for a water, sewer and conduit PVC pipe supplier. He is licensed as a Professional Engineer in Ohio and Texas.

This licensed engineer earned his BS in Electrical Engineering from the University of Missouri and is a certified fire & explosion investigator. He has held a number of electrical engineering and products safety positions throughout his career, specializing in EE, product development, technical management, design verification, advanced troubleshooting, and failure analysis. This expert is currently a Senior Professional Engineer at a private Engineering consultancy.

This expert is a Safety Manager/Engineer/Inspector with 20 years of progressive experience and a proven track record implementing safety programs to reduce incidents, improve environments and deliver measurable cost savings. He has a strong background in OSHA, Regulatory and EPA compliance, including advanced training, consulting, and instruction, having worked there for 9 years. He has developed safety policies and procedures during the oversight of more than 110 construction and heavy machinery projects, and has been used as a strategic resource in manufacturing environments through creation of safety management programs. Currently, he is the senior safety consultant at a full service EHS Consultation firm providing safety training , onsite safety staffing, accident investigations and full safety program management and development.

This expert has 38 years experience in Safety Engineering, Loss Prevention & Control, and Accident Investigation & Root Cause Analysis. She has 15 years in OSHA Outreach Training in General Industry and Construction Safety & Health Standards. Additionally, she has consulted with and taught OSHA outreach courses for several State and Federal Agencies, including the Texas Department of Transportation; U.S. Department of the Interior, U.S. Geological Survey; U.S. Department of Labor - Occupational Safety and Health Administration.

This expert has over 30 years of experience working in the toxicology and health risk assessment field. He specializes in evaluating potential human health effects of chemical and microbial agent exposures. In particular, he has experience with evaluation of exposures to asbestos, benzene, carbon monoxide, silica, metals, pesticides, solvents, oil and gas fracking chemicals, other petroleum products, and toxic gases. Additionally, he is a Board-Certified Toxicologist as a Diplomate of the American Board of Toxicology and a Licensed Professional Engineer. Currently, this expert is a toxicologist at a privately owned toxicology and human health risk assessment firm.

This is a highly qualified expert who is capable of reviewing the case at hand. He is highly published and has considerable professional and academic experience in the field of ergonomics and engineering, making him capable of commenting on the potential for negligence on the part of the defendant in this case. The areas in which he has consulted with attorneys may be broadly characterized as those involving issues pertaining to ergonomics/human factors, product safety, and occupational safety. In addition to consulting with attorneys, he teaches the senior level Safety Engineering class and the graduate level Ergonomics class in the Industrial Engineering program at the Pueblo campus of Colorado State University where he is an adjunct professor. He also consults with manufacturers on product safety and with employers of various types on workplace safety.

This expert has over 40 years of experience in engineering and construction, with more than 35 years of experience in the field of natural gas and propane incidents, pipeline construction and operation, and water and sewer systems. He is currently the president of a reputable forensic engineering and failure analysis company. His primary areas of expertise include residential, commercial and industrial natural gas and LP gas fires, explosions and carbon monoxide incidents. He has experience with gas processing plants, regulator stations, compressor stations, and other facilities and has conducted numerous investigations and has testified about issues at these types of facilities. He has investigated many carbon monoxide incidents and has conducted major carbon monoxide testing programs throughout the country. He has a great deal of experience and has testified on numerous occasions regarding carbon monoxide issues.

This well seasoned former senior engineering associate at Exxon Chemical has almost 60 years of experience in manufacturing of olefin based polymers. During his time at Exxon he was the technical start up leader for a multi-million dollar polypropylene project. In 1994 he founded his own polymers and process engineering consulting company where he has worked with several Fortune 500 companies on process development and scale up, process design, plant problem solving and training. He has authored two books on process engineering as well as developing a five day training course to cover problem solving concepts.

This expert has over 35 years of experience in construction engineering. His research includes construction claims, construction safety, alternative energy technology, and waste disposal technology. He has served as Principal Engineer for various companies and, subsequently, legal counsel after receiving his J.D. In addition to serving as President of a consulting engineering company, he currently serves as Professor of Civil and Environmental Engineering as well as Director of Construction Management for a university.

This highly qualified aeronautics expert earned his masters and PhD in Aeronautics and Astronautics from MIT. He is a fellow in the American Society of Mechanical Engineers, and an associate fellow in the American Institute of Aeronautics and Astronautics. He has authored more than 100 publications in the aeronautics space and is currently a Professor of Aerospace Engineering at a top midwest university.

This highly qualified chemical engineer has more than 40 years of experience in the design and operation of petroleum refineries, oil terminals, and petrochemical plants. Much of his work originates at executing process simulators, including simulations in petroleum refining, ethylene, fine chemicals, reforming processes, dehydration, distillation, and gas processing. For the past 30+ years, this expert has been the President, Owner, and Engineering Manager for a large chemical process design firm that analyzes chemical processes, petrochemical plant safety, and a variety of facets in the industry.

This highly qualified radiologic technologist has 25+ years of experience. He is licensed radiologic technologist in New Mexico and licensed by the American Registry of Radiologic Technologists in M.R.I. and Radiography, the American Society of Radiologic Technologists, and the American Healthcare Radiology Administrators. He earned his AAS in Radiologic Technology at Aims Community College, his BS in Radiologic Sciences at the Adventist University of Health Sciences, and his MS in Health Care at Capella University. This expert has both clinical and academic teach experience. Formerly he was a Radiologic Technologist student at the North Colorado Medical Center, McKee Medical Center, Poudre Valley Medical center and a Clinical Radiologic Instructor at Webster State University. Currently he is the Assistant Director of Diagnostic Imaging at Level III Trauma Center in New Mexico and an adjunct faculty instructor for San Juan College in the Health Information Technology division.

This expert has been working with floating drilling and production vessels for over 40 years. He completed his undergraduate studies in Civil Engineering in Hong Kong prior to earning an M.S. and Ph.D. in Structural Engineering from the University of Houston. He began his career as a Design Engineer and Computer Specialist with The Offshore Company, where for 6 years he performed analyses for the design and operation of floating drilling vessels, including conducting mooring and riser analyses. He then joined Exxon's upstream research affiliate Exxon Production Research Company, where he worked for 22 years. As a Senior Research Specialist in their Offshore Division, this expert conducted research in the areas of mooring and risers and provided technical support to Exxon's offshore operations worldwide, while he also taught internal training courses on mooring and riser systems. Furthermore he has been teaching mooring short courses at the University of Texas and in Singapore. He was the recipient of awards and honors such as the American Petroleum Institute's Citation for Distinguished Meritorious Service, DeepStar's Outstanding Contribution Award, and Who's Who in the South and Southwest. He was the chairman of API Mooring Resources Group for 24 years (1982-2006) responsible for the development of API RP 2SK (mooring design), API RP 2I (mooring inspection), and API RP 2SM (fiber rope mooring). He also played a key role in the development of the International Organization for Standardization (ISO) mooring codes, which required a thorough understanding of both American and European mooring codes. Currently, this expert is a Technical Advisor for a private offshore industry consulting group, as well as an independent consultant to the offshore industry. Some of his activities in these roles have included writing mooring standards for Chevron, revising the American Bureau of Shipping Guidance Notes on Application of Fiber Rope for Offshore Mooring, and directing a joint industry project on Arctic mooring systems. He has served as a mooring expert in 7 litigation processes concerning mooring failures.

This board certified forensic engineer earned his BS and MS in Mechanical Engineering and PhD in Technical Science. He is also a fellow of the National Academy of Forensic Engineers and a member of the National Society of Professional Engineers. This expert has published an extensive body of literature in his field, and has given nationally invited lectures and presentations at such prestigious institutions as Johns Hopkins. He has qualified as an expert witness before several state and federal courts. Currently, this expert is the President and CEO at a major engineering research laboratory.