Technical Expert Witnesses in Alabama

This highly qualified expert has over 30 years of experience as an engineer. He received a B.S. in Mechanical Engineering from the Georgia Institute of Technology and is a Registered Professional Engineer in 9 states. A member of both the American Society of Mechanical Engineers and the National Academy of Forensic Engineers, he has published several articles on various issues including cranes and plumbing failures. He previously worked for Georgia Power Company where he maintained different plant aspects and addressed deficiencies. He also worked at Cerny & Ivey Engineers, Inc. where he managed the engineering and technical staff as well as mechanical/electrical/structural engineering and testing responsibilities. He currently serves as President and Principal Engineer for an engineering company that consults in failure investigations, safety, design, and products and materials testing.

This expert has more than 30 years experience investigating water heater, valving, piping, and injuries related to steam and water pressure. He earned his bachelors and masters degrees in Physics from Georgia Tech and is highly regarded in his field. He is currently the Principal of a mechanical engineering firm that investigates industrial steam accidents, provides consulting to operators of high pressure steam systems experiencing water hammer, and provides seminars to operators and engineers on understanding water hammer in steam systems.

This expert is a registered professional mechanical engineer with extensive hands-on experience in thermodynamics and testing. He earned his Masters and PhD in Mechanical Engineering from Georgia Institute of Technology. He has held a number of engineering positions and is currently a Professor of Mechanical Engineering focusing on thermodynamics at a technical university in the Atlanta area. Primary activities have focused on basic and applied research in the areas of constitutive model development and processing, mechanical property characterization, and structural testing & analysis for advanced materials including high performance and ultra-lightweight polymers, polymeric composites, and metals. Specifically, areas of expertise include formulating new constitutive relationships and associated experimentally-based methodologies for characterizing the time, rate, environmental, and temperature dependent mechanical response of materials; the development of laboratory testing techniques and instrumentation for investigating and determining structural and material behavior, low velocity impact effects, and related phenomenological events in composites; and the development of analytical and numerical methods for characterizing and modeling the environmental degradation, long-term durability, and damage tolerance of polymer matrix composites and MEMS structures. Current topics include experimental mechanics, MEMS, structural analysis and design, rheology, thermochemical analysis, fatigue life assessment and prediction, micromechanics and long term durability.

This qualified engineer obtained his BS in Civil and Structural Engineering and his MS in Management of Technology from Kennesaw State University and Southern Polytechnic State University. He is a certified Professional Engineer and is certified in OSHA requirements and engineering and surveying. He is a member of the National Society of Professional Engineers and the National Academy of Forensic Engineers. He has 8 Publications and is currently a Structural Design and Forensic Engineer at an engineering firm in the southeast. Some of his fields of expertise include forensic/failure and safety analysis, civil/structural design of public and private structures, and construction site accident investigations. A partial list of past subjects addressed include wood/concrete deck collapses, commercial/residential roof damage evaluations, excavation failures/incidents product liability, traffic accident reconstruction, mold source evaluation, construction cost estimating, hydrology/sewer studies, airport consulting, roadway design, geotechnical/subsurface investigations, construction materials failure analysis, structural analysis and design of various material components, scaffolding failures, water damage source evaluation, structural damage inspections, OSHA compliance evaluations, and concrete/asphalt pavement evaluation and design. Has an intimate knowledge of OSHA worksite regulations, and the various national building codes and standards for Industrial, Commercial and Residential structures.

This expert earned his BS in mechanical engineering from the University of Texas at Austin and his MS in product design engineering from Stanford University. He has seven years of industry experience working as a product designer for Ford Motor Company and Volkswagon of America. He has over fifteen years of experience designing products for automotive and home electronics clients. This expert is currently a professor of industrial design at a university in Georgia and the principal of a design and engineering consultancy.

This expert in traffic accident reconstruction has over 35 years of experience as a traffic and transportation engineer. He received his BS in traffic and transportation engineering from the University of Belgrade, his MS in civil engineering from the University of Zagreb, and his PhD in traffic and transportation engineering from the University of Zagreb. He has published four textbooks and over 60 professional publications on topics in transportation engineering. Formerly, he has served as a roadway specialist at the Tennessee Department of Transportation and a transportation planner at Gary Struthers Associates. In addition, this expert has held roles as a leading traffic engineer at CHS Consulting Group and a dean and professor in the college of engineering at Pan-European University. Currently, he is a program and project manager at a major transportation department.

This highly-qualified expert has over 35 years of experience in the field of architecture, construction, and civil engineering. He earned his bachelor of architecture and his master of science in civil engineering from the University of Tennessee, Knoxville. He is a certified construction manager and licensed general contractor and stays active in his field as a member of the American Society of Civil Engineers and Construction Management Association of America. Formerly, this expert held positions as director of engineering services for Tennessee Valley Authority, a regional engineer for the American Institute of Steel Construction, a project manager for Christman Construction and director of new construction and development for Belz Enterprises. He currently owns an independent construction consultancy in Tennessee.

This expert has extensive experience as a paper scientist and product engineer, with expertise in forensic document examination and legal document services. He earned his BS in paper science and engineering from the University of Minnesota. He has created two patent-pending technologies for advancements in forensic document examination and document security. Formerly, this expert has served as a production engineer for Boise Cascade Corporation and a technical sales analyst for Ashland Hercules Water Technologies. Currently, this expert is an account manager for a paper company in Georgia and a forensic document examination consultant.

This Georgia-based expert received his BS in management and economics from Western Carolina University. Over his lengthy career in information technology and project management, he has mastered over 12 programming languages, 6 operating systems, several web design, and development tools, and has been awarded with 10 patents in his field. Previously, he served as a senior manager for various transportation consulting projects, a project manager and lead developer for SAIC/The Louisiana State Health Department, the president of Webnet Media, and a project manager at B.E Technology. He has also served as a project manager and developer for Shelby County Trustee and ServiceMaster. Currently, he serves as a project manager and developer for a technology firm in Georgia.

This expert has 40 years of experience in mechanical engineering, specializing in engineering simulation, heat transfer, and fluid dynamics. After earning her BS in math and physics from Heidelberg College, she earned her BS in engineering physics and MS in mechanical engineering from the University of Toledo. She also obtained her PhD in mechanical and aerospace engineering at the University of Virginia before beginning a highly successful career in mechanical engineering research and engineering software. She is active in her field as a member of numerous professional organizations and as the author of over 80 journal articles, technical reports, web articles, and seminar presentations. Some of her former positions include serving as the president of Blue Ridge Numerics, Inc., as the vice president of product development for Compuflo, Inc., and as a professor of mechanical and aerospace engineering at the University of Virginia. In these roles, she conducted extensive research and directed technical simulation software development for 3 companies. Currently, this expert is a senior architect for a technology company.

This computer engineering expert earned his BS in computer engineering from the University of Florida. He has founded and served as the principal software engineer for several companies, including AutoNOC, TQ Leads, and Metacogna. He is proficient in over 30 programming languages and his company, AutoNOC was recognized as a Top 40 Technology Innovator by the Technology Association of Georgia. This expert currently serves as a consultant for a technology consulting company based in Georgia.

This expert has over 15 years of experience as an emergency medicine physician. He earned his BS in mechanical engineering from the United States Military Academy and his MD from the University of Mississippi before subsequently completing his residency in emergency medicine at the Morristown Memorial Hospital and his fellowship in critical care medicine at the University of Alabama at Birmingham. He is board certified in emergency medicine and is active in his field as a member of the American College of Emergency Medicine. Before transitioning to the medical field, this expert served in the army for 5 years and spent 6 years working for Swayze and Church as a mechanical engineer. He then went on to work at the University of Alabama at Birmingham, serving as the assistant medical director of critical care transport, an associate professor of emergency medicine, the director of the critical care fellowship, and an attending physician in the surgical intensive care unit. He has also served as the medical director for Pegasus Emergency Group, the regional medical director of the East region for AlignMD, and the medical director of the emergency department at Blount Memorial Hospital. Currently, this expert serves as the co-medical director of the emergency team at a medical school in Alabama and as an attending physician of emergency medicine for a health system in Mississippi.

This expert has been a practicing engineer for nearly 25 years. A registered Professional Engineer in good standing in 45 states (including Florida), he is a member of several professional engineering societies, as well as the International Sign Association and the Mid-South Sign Association. He has worked for a number of large engineering firms and industrial manufactures, and he currently serves as an Engineering Manager at an engineering firm that is a leader in the sign industry.