Technical Expert Witnesses in Idaho

This highly qualified engineer earned his BS and MS in mechanical engineering from California Polytechnic State University. He went on to earn his PhD in mechanical engineering from the University of California, Berkeley. He has over 10 years of experience conducting failure analysis for various products including biomedical devices. He formerly served as Principal Mechanical Engineer at COR Innovations, Inc., a biomedical device start-up. In this role, he was responsible for designing multiple functioning prototypes and designing and fabricating numerous electromechanical bench top apparatus' for materials testing and validation. He went on to serve as Senior Staff R&D Engineer at Abbott Vascular Structural Heart, where his primary role was serving as technical lead for improvements in their MitraClip device. He currently serves as Chief Technology Officer and co-founder of a medical device company that is focused on treating vaginal atrophy in breast cancer survivors and post-menopausal women through a novel and hormone-free, energy based therapy.

This qualified Fluid Flow Engineering Expert obtained his BSE in Civil Engineering and his MSE and Ph.D in Civil and Environmental Engineering from Utah State University. He is a Certified Engineer in Utah and has published 40+ articles focused on Civil and Environmental Engineering research. He is a member of the American Water Works Association and the American Society of Engineers and is currently a Research Professor in Civil and Environmental at a University in the West, a Civil and Environmental Engineer at a Water Research Laboratory, and a Consultant at a Private Consulting Firm. Expert has provided testimony and technical reports as well as external review of technical reports and analysis.

This expert has over 20 of wide-ranging engineering experience. He holds a Ph.D. in Mechanical Engineering from the University of New Mexico and an M.S. in Mechanical Engineering from Utah State University. He has held roles at Sandia National Laboratories in Albuquerque, New Mexico working on earth penetration weapons research and other advanced weapon concepts as well as a leading a hydrokinetic marine turbine manufacturing company. Currently, he is a principal of a roller coaster and amusement ride design consultancy firm. He has been involved in the design of numerous roller coasters and other amusement rides. Prior to forming this consultancy, he served as Chief Engineer for S&S Power, one of the largest and most innovative amusement ride manufacturers in the world. He can speak to finite element analysis, dynamic systems analysis, mechanical design, launch systems, coaster train design, restraint design, pneumatics, hydraulics, data acquisition, data analysis, technical project management, specialty computer programming, and testing in the amusement industry.

This expert is a full professor of Mechanical Engineering at a prominent university in the Western US. He received his PhD in Welding and Materials Engineering from The Ohio State University. Prior to joining academia, he worked as a research assistant at Edison Welding Institute and as a materials engineer at Westinghouse-Power Generation. His research interests are in the area of materials joining, materials characterization, and the relationships between microstructure and mechanical properties.

This expert gained his MS in public health with a focus on industrial hygiene and safety at the University of Washington. He is a certified industrial hygienist and will soon be certified as a Mold Assessor in Texas. Currently, he works as a senior industrial hygiene consultant win Washington State. Formerly, he served as an industrial hygiene engineer and consultant at Boeing, OR State Accident Insurance Fund, and owned a consulting firm called that was bought by Clayton Group Services (now Bureau Veritas). He has experience in litigation matters regarding asbestos, solvents, silica, noise, mold, bacteria, and other exposures.

This highly qualified engineering expert has extensive experience in his field. For the past 30 years, he has had specific experience in the mining and metal industry, pipeline engineering, and oil hydrocracking, to name a few. He received his BS in aeronautical engineering from the University of London and his MS in materials engineering from American University in Cairo, Egypt. This expert currently has 9 established patents. He has published over 20 journal articles and one book. Formerly, he has held roles as a senior mechanical engineer at Warman Pumps and Bateman Engineering. Additionally, this expert has served as a consultant for Sulzer Pumps North America, and as a former principal engineer and technical director at Fluor. Currently, this expert is a self-employed engineering consultant serving top clients across various industries.

This product design and liability expert has over 50 years of experience in mechanical engineering. He has devoted his entire career to the design, development, and commercialization of medical devices and similar consumer products, developing 5 patents along the way. He received his BS in mechanical engineering from California State Polytechnic College before obtaining his MBA from California State College. Formerly, he served as an engineer and department manager at California Injection Molding Co., a senior project engineer and the manufacturing engineer manager at McGaw Laboratories, the director of engineering at Hudson Oxygen Therapy Sales Co., and the president at Fallbrook Engineering Inc. Currently, he serves as the president of a consulting engineering services firm in Washington.

This expert has extensive experience in the amusement ride industry. He earned his BS in mechanical and aerospace engineering from Utah State University. He is a licensed structural engineer and professional engineer. He was the engineer of record for two notable commercial amusement rides and has experience in material handling and structural design. Currently, he is the president of an engineering design company that designs amusement park rides.

This highly-qualified expert has extensive experience in industrial and recreational fall protection, as well as the design and manufacturing of personal protective equipment for recreational activities such as rock climbing and mountaineering. He earned his BS in mechanical engineering from Widener University and is certified as a climbing wall instructor program provider and a high angle and confined space rescue technician. He is also Level III with the Society of Professional Rope Access Technicians. This expert is active in his field as a member of the Climbing Wall Association, the American National Standards Institute's Fall Protection Committee, and the American Mountain Guides Association. He has formerly served as a mechanical engineer for the Naval Surface Warfare Center, the senior research engineer for the Harold K. Dunn M.D. Orthopaedic Research Laboratory, and the technical director for Petzl America. Currently, this expert is the vice president of quality for a major mountain sports and climbing equipment manufacturer based in Utah.

This expert graduated from Seattle University and is currently a web accessibility engineer for a nationwide accessibility consultancy. Prior to his current role, his work experience includes serving as a senior mobile user interface architect for the Disney/ ABC digital media group, a UX/ UI/ web accessibility consultant for Bushido Designs, and a web accessibility subject matter expert for Microsoft.

This expert's skills and background include forensic analysis in the areas of industrial process systems, industrial process equipment including pumps, fans, heat exchangers, mixers, specialty equipment, piping include safety devices, and pipe support systems. Specific experience has been gained in chemical process plants, pulp and paper mills, wood processing plants, boiler plants, chiller plants, and co-gen systems. He is a fellow of the National Society of Professional Engineers and currently consults on a number of mechanical engineering projects.

This information technology expert has 20+ years of experience in the field. She formerly worked as a computer network specialist for FEMA and the Director of the Forensic Lab at Computer Forensics Associates. A member of the High Technology Crime Investigation Association, she currently owns and operates a full service digital forensics firm. She also worked with AccessData the leader in Digital Forensics Software.