Safety Expert Witnesses in New Mexico

This expert is a Safety Manager/Engineer/Inspector with 20 years of progressive experience and a proven track record implementing safety programs to reduce incidents, improve environments and deliver measurable cost savings. He has a strong background in OSHA, Regulatory and EPA compliance, including advanced training, consulting, and instruction, having worked there for 9 years. He has developed safety policies and procedures during the oversight of more than 110 construction and heavy machinery projects, and has been used as a strategic resource in manufacturing environments through creation of safety management programs. Currently, he is the senior safety consultant at a full service EHS Consultation firm providing safety training , onsite safety staffing, accident investigations and full safety program management and development.

This expert has 38 years experience in Safety Engineering, Loss Prevention & Control, and Accident Investigation & Root Cause Analysis. She has 15 years in OSHA Outreach Training in General Industry and Construction Safety & Health Standards. Additionally, she has consulted with and taught OSHA outreach courses for several State and Federal Agencies, including the Texas Department of Transportation; U.S. Department of the Interior, U.S. Geological Survey; U.S. Department of Labor - Occupational Safety and Health Administration.

This qualified Safety Engineer obtained his BS and MS in Chemical Engineering at the Polytechnic Institute of Brooklyn and earned a Doctor of Business Administration with a focus on Organizational Safety. Licensed as a professional engineer in Florida and certified as a safety professional (CSP), he has completed a considerable amount of additional training in OSHA and HAZOPs, fault tree and Root Cause Analysis (RCA). He began his career in chemical safety in 1972 with Industrial Risk Insurers, and ultimately managed risk engineering services for insurance companies such as Zurich, AIG, and others. He has audited hundreds of industrial plants over the course of his career.

This expert specializes in electrical engineering issues, and has performed numerous investigations into fires caused/allegedly caused by electrical issues. His experience includes evaluation of electronics products and their failure modes to determine whether they adhered to relevant safety standards, including those established by Underwriters Laboratories and the Canadian Standards Association. He has also evaluated products and components for structural wiring compliance with the National Electric Code. His projects have included a wide array of products and components, including but not limited to electronics, appliances, HVAC/R, residential and commercial wiring, and battery failure analysis, with an emphasis on lithium ion battery chemistry. He is a licensed Professional Engineer in multiple states, and holds a Certified Fire and Explosion Investigator certification.

This highly qualified project and construction management expert has over 30 years of professional experience in his field. He received his BS in industrial engineering and technology from East Central University and his MBA from Robert Kennedy College. He is a certified facilitator of incident and root cause analysis investigations and is certified by OSHA in construction safety. He has published over 15 papers, publications and manuals related to topics in his field. Formerly, this expert has held roles as a contractor at Willbros International and Parsons E&C. Additionally, he has served as a construction manager at Parsons/Enron International, as a contracted engineer at Willbros Engineering, a senior advisor for Frontier Energy, LLC., and as a senior construction consultant at Keystone XL Pipeline. Currently, this expert is the vice president of planning at an OK energy service.

This highly qualified expert has over 45 years of experience in the industrial hygiene and occupational health field. He earned his BS in chemistry and biology from the University of Alabama followed by an MS in environmental health engineering from the University of Cincinnati. He is a certified safety professional and certified industrial hygienist, as well as a licensed professional engineer. He is active in his field as a member of numerous professional societies, including the American Academy of Industrial Hygiene and the Board of Certified Safety Professionals. He has also published and lectured extensively in the environmental health and safety space, and he is an editor for the Applied Industrial Hygiene Journal. He has formerly served as an environmental engineer at the Naval Ordinance Environmental Health Center, as a safety and health compliance officer at OSHA, as the industrial hygiene director at the Naval Nuclear Shipyard and Naval Regional Medical Center, as an OSHA documentation manager for the TVA, and as a corporate director for Alcon Laboratories Pharmaceutical. He is currently a principal at an environmental and occupational health consultancy, as well as the director of the North Texas section of a national industrial hygiene association.

This expert has extensive experience in the field of clinical diagnostic medical physics and magnetic resonance. He earned his BS and PhD in biophysical sciences and medical physics from the University of Minnesota. He is a certified diagnostic & nuclear medical physicist and is board certified in diagnostic physics and as an MR safety expert. He is a member of the American Association of Physicists in Medicine, the International Society for Magnetic Resonance in Medicine, and the Radiological Society of North America. He previously served as a guest lecturer of physics at the University of Minnesota, as a technical aide for the Corporate Research Laboratories at 3M Company, and as a research assistant in the department of radiology and surgery at the University of Minnesota. This expert is currently a medical physics fellow in the imaging physics department at a prominent university cancer center in Texas.

This expert has extensive experience with coefficient of friction testing, OHSA, ANSI, risk and root cause analysis, and ergonomic assessments. He earned his AS in computer science from Westwood College of Technology and his BS in occupational health and safety from Columbia Southern University. He earned his SHEP (safety, health, and environmental) certification and has completed trainings in various areas, including OSHA, industrial hygiene, incident reduction, and risk assessments. He has previously held a number of safety positions such as safety coordinator at Fort Dearborn and environmental health and safety specialist at Weir SPM, PCC Aerostructures, and Parker Hannifin. This expert is currently the owner of a slip prevention business in Texas.

This expert has over 50 years of aviation experience. He earned his BS in aeronautical studies/flight technology from Embry-Riddle Aeronautical University and his MPA from Troy State University. He is a certified flight instructor, airline transport pilot, and remote pilot. He is a member of the National Air Transportation Association, the Airline Pilots Association, and the International Society of Air Safety Investigators. He previously served as a Captain with US Airways and as the Director of flight services, Chief Pilot, and Deputy Director of aviation at the Texas Department of Transportation. This expert is currently an aviation safety instructor at an aviation training firm and an aviation safety consultant at an aviation consultancy in Texas.

This highly qualified expert is a certified director of safety with 8 years of experience in the upstream oil & gas industry in managing Department of Transportation compliance and HSE system as well as a comprehensive working knowledge of SH&E issues and governmental regulations. He received his BS in organizational leadership at Mountain State University before going on to complete his MA in business and organizational leadership at Webster University in St. Louis. He is a certified director of safety, advanced accident reconstructionist and aircraft crash investigator. He has previously served as a Texas state trooper for the Texas Department of Public Safety and currently serves in public safety as the director for the national investigative services division at an organization in Georgia specializing in homeland security. He has also previously served as safety director, manager and DOT compliance administrator for various organizations, including, Expedited Logistics and Freight Services, Hyperion Safety Services and Baker Hughes. Currently, he serves as manager for DOT and compliance at a transportation company in Texas.

This expert has over 30 years of experience working in the toxicology and health risk assessment field. He specializes in evaluating potential human health effects of chemical and microbial agent exposures. In particular, he has experience with evaluation of exposures to asbestos, benzene, carbon monoxide, silica, metals, pesticides, solvents, oil and gas fracking chemicals, other petroleum products, and toxic gases. Additionally, he is a Board-Certified Toxicologist as a Diplomate of the American Board of Toxicology and a Licensed Professional Engineer. Currently, this expert is a toxicologist at a privately owned toxicology and human health risk assessment firm.

This is a highly qualified expert who is capable of reviewing the case at hand. He is highly published and has considerable professional and academic experience in the field of ergonomics and engineering, making him capable of commenting on the potential for negligence on the part of the defendant in this case. The areas in which he has consulted with attorneys may be broadly characterized as those involving issues pertaining to ergonomics/human factors, product safety, and occupational safety. In addition to consulting with attorneys, he teaches the senior level Safety Engineering class and the graduate level Ergonomics class in the Industrial Engineering program at the Pueblo campus of Colorado State University where he is an adjunct professor. He also consults with manufacturers on product safety and with employers of various types on workplace safety.

This expert has over 35 years of experience in construction engineering. His research includes construction claims, construction safety, alternative energy technology, and waste disposal technology. He has served as Principal Engineer for various companies and, subsequently, legal counsel after receiving his J.D. In addition to serving as President of a consulting engineering company, he currently serves as Professor of Civil and Environmental Engineering as well as Director of Construction Management for a university.

This aviation and aerospace expert is one of the leaders in his industry and has extensive experience in flight test, materials and properties laboratories, unmanned aerial systems, engineering operations, Safety Management Systems and quality. This expert started his career as a United State Army pilot and then advanced to several senior positions with the Federal Aviation Administration(FAA). As Manager Rotorcraft Directorate with the FAA, he was responsible for all FAA Experimental Test Flight policy, training, and administration for over 250 companies. He collaborated with industry to lower the number of fatal accidents from 30 to 14 per year over a five-year average. This expert received the Tony LaVier Award from the Society of Experimental Test Pilots for Lifetime Achievement in Flight Safety. He is a member of numerous prestigious organizations in the aviation field. He has authored 9 publications in the field and is a frequently invited guest speaker at major aviation events. This expert was the 2014 commencement speaker at Embry-Riddle Aeronautical University where he also earned his BS in Aeronautical Technology. He received his MS in Aerospace Management at the University of Tennessee Space Institute. Currently, he is the President of an independent aviation consulting firm and President of an international safety and risk management company serving the aviation industry.

This Certified Professional Ergonomist has been teaching and consulting on human factors/ergonomics, safety and systems for 40 years. He is a member of numerous prestigious professional organizations. As a Research Assistant at Texas Tech University's human factors lab, he served as a consultant to the Occupational Safety and Health Administration as well as the Arizona Center for Occupational Safety and Health. Currently, this expert is the President and Owner of a consulting firm where he consults for attorneys, insurance companies, business, industry, and academia on human factors/ergonomics and systems safety. He is also an Adjunct Associate Professor in the Department of Systems and Industrial Engineering at a top tier university, teaching human factors/ergonomics and safety.

This expert is a certified OSHA outreach instructor , teaches OSHA compliance, and has spent many years focusing on the safety direction for construction, oil and gas companies. He earned his Masters Degree in Occupational Safety & Health from Columbia Southern University and has held numerous safety management positions. In addition to his leadership roles in the oil and gas space, he is a licensed paramedic. Currently, this expert is the Owner and Operator of an industrial safety school, and the Corporate Safety Director of an oil and gas company. He is completing his Law degree at St. Mary's University School of Law in San Antonio, Texas.

This highly qualified expert has years of experience in the field of workplace safety and engineering management. He received his BS degree in construction science from Lonestar College and his MS degree in engineering management from Texas A&M University. He also obtained his health safety official certification at the University of Texas at Arlington. He is the former owner of Providence Safety Consultants and the former Safety Director at Everest Construction Group. He is also the former Safety Consultant at AMX Companies and the former Safety Coordinator at Greater Metroplex Interiors. Currently, he is the Corporate Safety Director at a major marble and granite fabrication company in Texas.

This expert's career in the aviation industry spans 37 years and has included work in turbine power plant, aircraft overhaul and component repair and overhaul. He has performed risk assessment for the insurance industry and both corporate and business aircraft owners have utilized his talents. He has received many awards from the Federal Aviation Administration while maintaining a staff position with the Transportation Safety Institute. He is a graduate of Embry Riddle Aeronautical University with a Bachelor of Professional Aeronautics. Additionally he is a current member in good standing with the NAAA and holds the title of Senior Certified Aircraft Appraiser (NSCA) endorsed by the USPAP. He is certified by the National Aircraft Appraisers Association for aircraft appraisals. Currently, this expert is the President of one of the world's top aviation appraisal consulting firms.

This expert has several years of property management experience, which includes 4 years of apartment management. For over 11 years he has also performed property safety inspections for major insurance companies. As a professional property manager, he holds the Master Property Manager designation from the National Association of Residential Property Managers. He conducted workshops for their property managers both locally and nationally, and is the author of several Property management classes approved in Texas for continuing education, and the Texas Real Estate Commission has certified the expert as an instructor of property management classes. In addition to authored classes, he has had over 25 property management articles published.

This expert is a health & safety expert in oil and gas, construction and mining drawing on his advanced education and about 20 years experience teaching safety practices and techniques reducing incidents and reducing costs/losses. He has worked at a variety of mining, petroleum, and construction companies as their lead environmental health and safety specialist. He has extensive experience drafting and implementing safety and environmental programs and field safety audit systems that comply with OSHA and MSHA standards.