Safety Expert Witnesses in Florida

This expert is well versed in all areas of maritime safety and regulation. He spent 30 years in the United States Coast Guard serving as a Boatswains Mate and Chief Warrant Officer, among other positions in operations and safety. He has conducted a myriad of law enforcement boardings to ensure vessels were in compliance with federal law and safety requirements. He is Coast Guard trained in Jones Act, OSHA Regulations, ABYC standards, and SMS (Safety Management Systems) requirements. This expert is currently a marine safety consultant at his own private consulting practice, where he advises on liability and negligence of marine equipment and behavior aboard ships.

This experienced trucking expert has been trained in safety supervision and accident investigation by the American Trucking Association and the North American Transportation Management Institute. He is a certified Director of Safety and a certified Driver Trainer. He has held a number of transportation safety, training, and management positions throughout his career and has specialized in managing various types of truck drivers and fleets. He is currently the president/owner of his own trucking safety consulting firm.

This expert holds a Doctoral Degree in Health Science from the AT Still Osteopathic Medical University and a Master's Degree in Public Health, with a concentration in Disaster Medicine. Additionally, he is a Certified Industrial Hygienist, along with being a Certified Safety Professional. His areas of expertise are the chemistry of hazardous materials and chemical microscopy.

This highly qualified maritime safety expert has been captaining ships for more than 30 years. He is trained in all operations of maritime operations and safety and has instructed on ships and ship safety extensively. He currently owns his own maritime safety and transportation logistics consulting firm, where he conducts training in the class room, in ports, and aboard ships.

President and CEO of company which specializes in identifying areas prone to slip and fall accidents. He entered the field of slip and fall accident prevention as a participant in the development of a chemical compound. This chemical compound known as Anti Slip Solution would prevent slip & fall accidents when applied to the surface. He currently consults with clients nationwide regarding slip and fall prevention, slip and fall safety programs and maintenance protocol. He also conducts surface testing in slip and fall litigation to determine if the surface in question is suitable for the demands of the environment and the activities conducted. All surface testing is conducted using a BOT-3000E (Binary Output Tribometer) in accordance with the American National Standards Institute (ANSI) and the National Floor Safety Institute (NFSI). The BOT-3000E is a robotic type of tribometer that represents the leading edge of technology in the field of slip resistance. This machine is designed to test both Static Coefficient of Friction (SCOF) as well as Dynamic Coefficient of Friction (DCOF). The test method is referred to as touch down friction� which simulates how a person's foot would contact the floor during normal ambulation. The BOT-3000E is an electromechanical device whose operation and output cannot be effected by the operator, thus making it the first user-independent tribometer. The BOT 3000E also has a data port allowing the operator to download results in PDF format. Surface testing using the BOT 3000E will assist in determining if the surface in question is suitable for the demands of the environment and the activities that are conducted.

This expert is recognized as one of the country's top food safety trainers and has 25+ years experience as a food safety consultant in the food industry. Currently, he has recently retired as president and founder of an independent food service practice which provides consulting and training to food service and lodging companies throughout the United States, Canada, and the Caribbean. The expert was involved in the creation of the ServSafe instructional series which is endorsed by the National Restaurant Association. This expert is a member several professional organizations including the Central Atlantic States Association of Food and Drug Official and Florida Association for Food Protection. Former positions have included Chair and Professor of Hospitality Management at Essex Community College, President and Chairman of the Board of the Council on Hotel. This expert earned a BS from Kent State University, a MS from The Johns Hopkins University, and an honorary Doctorate of Food Service from the National Association of Food Equipment Manufacturers.

This expert is a licensed professional civil engineer as well as a certified safety professional. He completed his undergraduate education at the University of Cincinnati and received his JD from the University of Dayton. He has 25+ years of experience in construction specifically, safety and risk management. Previously, he served as a project engineer and a corporate safety and risk director for major construction and transportation companies. He was responsible for coordinating and managing all safety aspects of mid-sized contracting firms, including transportation and OSHA. Additionally, he has specific expertise in trenching, excavation, fall protection, and scaffolding. He is a nationally recognized speaker and the recipient of several awards. He has authored various publications and previously served as an adjunct professor at Universities. This expert is an authorized construction and general industry trainer for OSHA and is currently the president of a safety firm in Ohio

This expert has 25 years of experience in the field of electrical engineering and has owned and operating a successful engineering firm and consultancy for the past 17 years. He earned his PhD in Electrical Engineering at the University of South Florida, where he wrote his dissertation on arc flash hazard mitigation. He has been hired to analyze more than 100 electrical power systems and regularly conducts training on the the hazards of arc flashes, in keeping with the safety procedures recommended by the IEEE, NFPA, and OSHA.

This expert is a board certified professional ergonomist and an internationally recognized expert in patient care ergonomics. She provides safe patient handling and mobility (SPHM) consultation and training related to equipment requirements, safe patient handling techniques, program implementation and maintenance, ergonomic design in health care facilities, and cost/benefit analysis. She researched, developed, implemented, and sustained the Veterans Health Administration's (VHA) national SPHM Program in 153 VA facilities, bringing national recognition to the VA Program while she also provided consultation to the other governmental and non-governmental entities, and international organizations. She led the American Nurses Association (ANA) team to develop the Safe Patient Handling and Mobility Standards, now included in National Legislation. Her expertise and tenacity led to the incorporation of safe patient handling design criteria in the Facility Guidelines Institute (FGI) 2010 National Guidelines for Design and Construction of Health Care Facilities. She assisted in the development of the Safety Risk Assessment (SRA) that was included in the 2014 FGI national Design Guidelines. She also serves as an advisory board member for the University of South Florida NIOSH Sunshine Environmental Resource Center. She was the recipient of the 2011 "Advocacy Award for Improved Caregiver Safety" and the NIOSH National Occupational Research Agenda (NORA) "Partnering Award for Worker Health and Safety" in 2006.

This highly-qualified expert has over 30 years of experience in the field of risk management, specializing in retail risk assessment, enterprise risk management, retail safety and security management, claims management, liability, and property claim negotiation. He earned his BS from Eastern Kentucky University and has completed professional development courses in risk management services, casualty claims adjusting, and criminal interrogation and behavioral analysis. He is active in his field as a member of the Risk and Insurance Management Society. He has formerly served as the manager of risk control and claims for Chiquita Brands International, the director of risk services for the Pillsbury Company, the vice president of risk management for Advance Auto Parts Company, and the director of risk management for Central Parking System. Most recently, this expert served as the director of liability claims for Publix Super Markets.