Manufacturing Engineer Expert Witnesses in Texas

This expert is one of the top innovators in the U.S. specializing in cranial protective system technology, materials technology, design, and manufacturing. He has invented, designed, engineered, and manufactured multiple products being used today in sporting goods, and has been a consultant and contractor for prime military contractors and private firms.

This expert joined the Departments of Bioengineering and Mechanical Engineering at a major TX University in June 2013 as an Assistant Professor. Prior to joining that university, he was a Research Scientist at the Rehabilitation Institute of Chicago and a Postdoctoral Fellow at Northwestern University. This expert investigates the control mechanisms of human locomotion for the development of high-performance wearable control systems (e.g., robotic prostheses and orthoses) to enable mobility in persons with disabilities. He is a recipient of the NIH Director's New Innovator Award and the Career Award at the Scientific Interface from the Burroughs Wellcome Fund. His work has been recognized with the Best Student Paper Award of the American Control Conference and the IEEE Conference on Decision & Control, the Best Technical Paper Award of the 2011 CLAWAR Conference, and the O. Hugo Schuck Award from multiple control conferences and councils, respectively. He is a Senior Member of the IEEE Control Systems Society and the IEEE Robotics & Automation Society.

This highly qualified expert has more than 40 years of international experience in the development and implementation of occupational health, safety, and environmental (HSE) management systems within the petroleum, petrochemical,manufacturing, and construction industries. He is an advisor to management on regulatory compliance with worldwide agencies such as BSEE, EC, OSHA, HSE, PSA, SSM, DEA, USCG, MSHA, MMS, NOPSA and other applicable industry standards and codes. He is experienced with ISO, ISM, Injury Incident Free (IIF) culture building, root cause analysis, and behavior based safety; including 24 years experience with stringent safety requirements of the North Sea regulatory agencies.

This engineering expert has a master's degree in Metallurgical Engineering and a Ph. D. in Industrial Metallurgy. He has worked as a Professor of Mechanical Engineering and Engineering Technology since 1987 and currently is tenured at a public university in North Texas. In addition, he actively consults and has worked on several failure analysis cases as an expert witness in the area of defects in materials, corrosion, materials selection, and manufacturing processes. The expert is a Member of the National Association of Corrosion Engineers and has published 12 research/technical reports.

This expert is an Assistant Professor of Mechanical Engineering in the Department of Mechanical Engineering at a TX university and a transportation research faculty. She joined the department in 2011 after post-doctoral fellowships at Oak Ridge and Pacific Northwest National Laboratories. She received her Ph.D. from the University of Wisconsin-Madison, and completed her dissertation research in residence in the Fuels, Engines & Emissions Research Group at Oak Ridge National Laboratory. She teaches undergraduate courses in thermodynamics, heat transfer, thermal fluids analysis, engineering ethics, and senior capstone design. She teaches graduate courses in thermodynamics, heat transfer and combustion science. Her research interests are in the area of sustainable energy & environment. Specifically, she studies automotive emissions aftertreatment and remediation of heavy hydrocarbon contamination in soils by applying a suite of chemical and physical characterization techniques.

This expert on Oil and Gas Engineering has been in the industry for 30+ years. He has experience with engineering, engineering management, and forensic engineering investigations. He possesses a thorough understanding of design, construction, and operational needs. He obtained his BS in Mechanical Engineering from New Mexico State University and his MS in Industrial Engineering from the University of Houston. He is a certified Professional Engineer in TX and is currently a Senior Consultant at a private engineering consultant firm.

This well-qualified expert earned his MS in Mechanical Engineering from the Polytechnic Institute of Bucharest [Romania], his MBA in International Economic Relations from the Academy of Economic Sciences [Romania], and his PhD in Engineering from North Dakota State University. He is active in his field as a member of several professional organizations, including the American Society for Engineering Education, the American Society of Mechanical Engineers, the Society of Automotive Engineers and the American Management Association. This expert has been granted 10 patents as contribution to innovation in his field. Formerly, he was the Vice President of Engineering for PRISM Enterprises, Inc., an Adjunct Professor of Physics, Engineering and Architecture Department at San Antonio College, and a Senior Design Engineer & Project Manager for Kinetic Concepts, Inc. He is currently an Engineering Coordinator for a top college, the Co-Director for a Science & Mathematics Education Program in a top university, as well as an Adjunct Professor in the School of Engineering for a top university.

This expert in technical documentation and mechanical engineering has over 35 years of professional experience. He completed his AAS in electrical engineering and his BS in mechanical engineering from NEC and Texas Tech University. He is skilled in electrical, mechanical, hydraulic, HVAC power distribution, in addition to HTML SGML and other programs. Formerly, he has served as a technical writer at Allard, the director of content development at Zane Publishing, and a manager of technical publications at USDATA. Currently, this expert is a senior technical writer at a TX technical documentation firm.

This highly-qualified expert has over 35 years of experience in HVAC and plumbing design. He earned his BS in mechanical engineering from Texas Tech University. He's active in his field as a member of several organizations, including the Academy of Mechanical Engineers and the American Society of Heating, Refrigerating and Air Conditioning. This expert is a licensed professional engineer in 16 states. He has formerly served as a project engineer, principal, and secretary/treasurer for Fanning, Fanning, & Associates. Some notable projects he has worked on with Fanning, Fanning, & Associates include the El Paso Medical Education Building at Texas Tech University and the USDA Cotton Classing Lab. Currently, this expert is the president of an engineering consulting firm based in Texas.

This highly-qualified expert has extensive experience in global operations and supply chain management. His areas of expertise include profit and loss, business valuation, product reliability, customer service, sales and marketing, and safety and environmental regulations. He earned his BS in industrial engineering technology from the University of Poona in India before earning a certificate of process engineering management from Vincennes University in Paris and completing MBA courses at the University of Texas Dallas. He is an active member of the Locomotive Maintenance Officers Association. He began his career with PC Dynamics, Mwave Inc, serving as their engineering director for 7 years before transitioning to being the manufacturing consolidation project manager for Chromium Corporation. He went on to work with Chromium Corporation for nearly 20 years, serving as the director of business process development, the vice president of operations and business logistics, and the executive vice president of ELKCORP. This expert served as the president of Chromium Corporation for 10 years, leading the organization in the manufacturing of heavy engine's components for locomotive, marine, and stationary power supply units.

This expert has over two decades of experience in the field of quality and manufacturing processes, specializing in automotive vehicles and their components. She received her BS in chemical engineering from the University of Waterloo and then became a process engineer at Woodbridge Foam. Afterward, she worked as a quality engineer at Estee Lauder Corporation, a project manager for ATS Automation Tooling Systems, and then as the assistant manager of quality engineering at Toyota Motor Manufacturing Canada, where her primary role was to ensure accurate root cause analysis on completed vehicle or sub-component quality problems related to customer-use, manufacturing, or design-related issues. She then became the director of global quality for valve and pipes manufacturing at Crane ChemPharma & Energy, where she was responsible for implementing Global Standard Quality Processes to manage in-house and supplier manufacturing. Currently, she owns a private consulting firm in Texas.

This highly-qualified expert is an MIT-trained engineer specialized in mechanical engineering, process engineering, oil and gas, flow assurance, and thermal-hydraulics with 40 years of experience in his field. After graduating from the industrial engineer program at the Universidad Católica Andrés Bello in Venezuela, he went on to study at MIT, earning an MSc, an ME, and a PhD. He is a licensed professional engineer in the state of Texas and is a Bechtel-certified engineering supervisor and project engineering manager, as well as a Bechtel distinguished engineer. This expert is active in his field as a member of several organizations, including the Society of Petroleum Engineers, the American Society of Mechanical Engineers, and the American Society of Heating, Refrigerating and Air-Conditioning Engineers. He worked as an engineer for several firms in Venezuela for over 25 years before moving to the United States to serve as BP America's process engineering team coordinator. He then went on to serve as a process engineering manager for Jacobs Engineering and a flow assurance manager for both Technip and Bechtel Engineering. He has received several honors and awards for his work, including being the first Hispanic recipient of the Madam Curie Research Grant. Currently, this expert serves as the president of a mechanical, process, and flow assurance engineering consulting firm in Texas.

This well seasoned former senior engineering associate at Exxon Chemical has almost 60 years of experience in manufacturing of olefin based polymers. During his time at Exxon he was the technical start up leader for a multi-million dollar polypropylene project. In 1994 he founded his own polymers and process engineering consulting company where he has worked with several Fortune 500 companies on process development and scale up, process design, plant problem solving and training. He has authored two books on process engineering as well as developing a five day training course to cover problem solving concepts.