Manufacturing Engineer Expert Witnesses in New Mexico

This highly qualified expert has 17 years of experience with in-depth Accident Reconstruction analysis. Her specialties include Motor Vehicle Accident Reconstruction for product liability matters. She is experienced collecting and analyzing Event Data Recorders and is currently an Expert at a distinguished Forensic Engineering and Accident Reconstruction firm.

This highly qualified expert earned his BS from Hope College and his PhD in organic chemistry from Indiana University. He has experience in catalyst research in support of polyethylene manufacturing, additive stabilization of polymers, interaction of chemicals with plastics, extrusion production of plastic pipe, plastic pipe material technical service and plastic pipe system component testing. End use applications in which he is a plastics expert include corrugated plastic pipe, water distribution and plumbing systems, oil and gas production, plastic gas pipe, and conduit. In addition, this expert is active in his field as a member of numerous societies including The American Society of Mechanical Engineers, American Gas Association, American Petroleum Institute, Plastic Pipe Institute, and Society of Plastics Engineers. Formerly, he held roles as Pipe Applications and Technical Supervisor at Chevron Phillips Chemical Company and Technical Director at Microbac Hauser Divison. Currently, he is President of a plastics consulting firm.

This well-qualified expert earned his MS in Mechanical Engineering from the Polytechnic Institute of Bucharest [Romania], his MBA in International Economic Relations from the Academy of Economic Sciences [Romania], and his PhD in Engineering from North Dakota State University. He is active in his field as a member of several professional organizations, including the American Society for Engineering Education, the American Society of Mechanical Engineers, the Society of Automotive Engineers and the American Management Association. This expert has been granted 10 patents as contribution to innovation in his field. Formerly, he was the Vice President of Engineering for PRISM Enterprises, Inc., an Adjunct Professor of Physics, Engineering and Architecture Department at San Antonio College, and a Senior Design Engineer & Project Manager for Kinetic Concepts, Inc. He is currently an Engineering Coordinator for a top college, the Co-Director for a Science & Mathematics Education Program in a top university, as well as an Adjunct Professor in the School of Engineering for a top university.

This expert has over 20 of wide-ranging engineering experience. He holds a Ph.D. in Mechanical Engineering from the University of New Mexico and an M.S. in Mechanical Engineering from Utah State University. He has held roles at Sandia National Laboratories in Albuquerque, New Mexico working on earth penetration weapons research and other advanced weapon concepts as well as a leading a hydrokinetic marine turbine manufacturing company. Currently, he is a principal of a roller coaster and amusement ride design consultancy firm. He has been involved in the design of numerous roller coasters and other amusement rides. Prior to forming this consultancy, he served as Chief Engineer for S&S Power, one of the largest and most innovative amusement ride manufacturers in the world. He can speak to finite element analysis, dynamic systems analysis, mechanical design, launch systems, coaster train design, restraint design, pneumatics, hydraulics, data acquisition, data analysis, technical project management, specialty computer programming, and testing in the amusement industry.

This expert is a full professor of Mechanical Engineering at a prominent university in the Western US. He received his PhD in Welding and Materials Engineering from The Ohio State University. Prior to joining academia, he worked as a research assistant at Edison Welding Institute and as a materials engineer at Westinghouse-Power Generation. His research interests are in the area of materials joining, materials characterization, and the relationships between microstructure and mechanical properties.

This highly qualified expert is a registered professional engineer with over 15 years of experience in geotechnical and structural design in roles spanning from engineering consulting to senior executive in a manufacturing company. He received a diploma in civil engineering with an emphasis on structural engineering from Germany and a Ph.D. in civil engineering with an emphasis on geotechnical engineering from The University of Arizona. He holds professional engineering licenses in 35 U.S. states as well as the country of Australia and serves or has served on various national and international committees related to solar energy system design and construction. He is also a frequent speaker at conferences throughout the United States and Canada.

This qualified expert earned his BS in mechanical engineering from Detroit Institute of Technology, his MBA from University of Phoenix, and his DBA from Nova Southeastern University. He is a member of the American Society of Mechanical Engineers,the American Gunsmithing Association, and the Society of Automotive Engineers International. Formerly he served in multiple engineering management positions at AlliedSignal Aerospace (Honeywell) and as the owner of and gunsmith for Accurate Firearms Repair. This expert currently is the founder and owner of a gas turbine engine industry consultancy and a personal injury lawsuit consultancy.

This oil and gas expert has worked in the industry for 28 years. After earning his BS in mechanical engineering at the University of Minnesota, he became a certified professional engineer in the states of CA, KS, LA, OK, and TX. He served as a design engineer for SPEC Services, a senior project engineer for Unocal 76 Products Company, a director for Conoco Pipe Line Company, a senior engineer for Baker Consulting Group, and as vice president of pipeline operations at JP Energy Partners. He is also a member of prestigious societies as the American Society of Mechanical Engineers and is a member of the Subcommittee on Aboveground Storage Tanks with the American Petroleum Institute. Currently, this expert is the owner of an OK independent engineering consulting firm.

This expert in technical documentation and mechanical engineering has over 35 years of professional experience. He completed his AAS in electrical engineering and his BS in mechanical engineering from NEC and Texas Tech University. He is skilled in electrical, mechanical, hydraulic, HVAC power distribution, in addition to HTML SGML and other programs. Formerly, he has served as a technical writer at Allard, the director of content development at Zane Publishing, and a manager of technical publications at USDATA. Currently, this expert is a senior technical writer at a TX technical documentation firm.

This highly qualified expert has nearly 25 years of experience in electronic engineering. He received his BS in electrical engineering from the University of California Irvine before earning his PhD in electronics engineering and control systems at the University of Colorado. This expert is a licensed professional engineer. He is active in his field as a member of IEEE and currently holds 3 patents. He has formerly served as a principal engineer for ETO/ASTeX and NeoCore, as well as the chief architect for Xpriori and a researcher in the electrical and computer engineering department of Valdez International. Currently, this expert serves as the COO for an engineering consultancy in Colorado.

This well seasoned former senior engineering associate at Exxon Chemical has almost 60 years of experience in manufacturing of olefin based polymers. During his time at Exxon he was the technical start up leader for a multi-million dollar polypropylene project. In 1994 he founded his own polymers and process engineering consulting company where he has worked with several Fortune 500 companies on process development and scale up, process design, plant problem solving and training. He has authored two books on process engineering as well as developing a five day training course to cover problem solving concepts.

This expert is one of the top innovators in the U.S. specializing in cranial protective system technology, materials technology, design, and manufacturing. He has invented, designed, engineered, and manufactured multiple products being used today in sporting goods, and has been a consultant and contractor for prime military contractors and private firms.

This engineer is an expert in the areas of fire causation and consumer product defects as well as construction materials and workmanship issues. He has specific expertise with installation and maintenance of household appliances including stoves and ovens. He belongs to a number of societies in the engineering field including the American Society of Mechanical Engineers and the National Academy of Forensic Engineers. He is currently a private engineer specializing in design, failures, building code and ADA compliance issues, and human factors.

This board certified forensic engineer earned his BS and MS in Mechanical Engineering and PhD in Technical Science. He is also a fellow of the National Academy of Forensic Engineers and a member of the National Society of Professional Engineers. This expert has published an extensive body of literature in his field, and has given nationally invited lectures and presentations at such prestigious institutions as Johns Hopkins. He has qualified as an expert witness before several state and federal courts. Currently, this expert is the President and CEO at a major engineering research laboratory.

This expert has over 35 years of experience as a professional engineer. He is a registered as a Professional Mechanical Engineer (P.E.) in Arizona, California, Colorado, Illinois, New Mexico, New York, Nevada, Oregon, Texas and Utah. He is an internationally recognized authority on assessing, evaluating, conceptualizing and remediating complex project design, construction and operational issues related to HVAC systems, cleanrooms, piping systems, refrigeration systems, and building and fire code compliance. He has analyzed and designed hundreds of projects including commercial facilities, institutional laboratories and clean-room facilities for the semiconductor and other industries. He currently is the owner and principal of his own engineering consulting firm. Additionally, he is an adjunct professor in the Department of Mechanical Engineering at a university in Arizona, and lectures on the analysis and design of environmental control systems (HVAC) for buildings.

This expert joined the Departments of Bioengineering and Mechanical Engineering at a major TX University in June 2013 as an Assistant Professor. Prior to joining that university, he was a Research Scientist at the Rehabilitation Institute of Chicago and a Postdoctoral Fellow at Northwestern University. This expert investigates the control mechanisms of human locomotion for the development of high-performance wearable control systems (e.g., robotic prostheses and orthoses) to enable mobility in persons with disabilities. He is a recipient of the NIH Director's New Innovator Award and the Career Award at the Scientific Interface from the Burroughs Wellcome Fund. His work has been recognized with the Best Student Paper Award of the American Control Conference and the IEEE Conference on Decision & Control, the Best Technical Paper Award of the 2011 CLAWAR Conference, and the O. Hugo Schuck Award from multiple control conferences and councils, respectively. He is a Senior Member of the IEEE Control Systems Society and the IEEE Robotics & Automation Society.

This highly qualified expert has more than 40 years of international experience in the development and implementation of occupational health, safety, and environmental (HSE) management systems within the petroleum, petrochemical,manufacturing, and construction industries. He is an advisor to management on regulatory compliance with worldwide agencies such as BSEE, EC, OSHA, HSE, PSA, SSM, DEA, USCG, MSHA, MMS, NOPSA and other applicable industry standards and codes. He is experienced with ISO, ISM, Injury Incident Free (IIF) culture building, root cause analysis, and behavior based safety; including 24 years experience with stringent safety requirements of the North Sea regulatory agencies.

This engineering expert has a master's degree in Metallurgical Engineering and a Ph. D. in Industrial Metallurgy. He has worked as a Professor of Mechanical Engineering and Engineering Technology since 1987 and currently is tenured at a public university in North Texas. In addition, he actively consults and has worked on several failure analysis cases as an expert witness in the area of defects in materials, corrosion, materials selection, and manufacturing processes. The expert is a Member of the National Association of Corrosion Engineers and has published 12 research/technical reports.

This expert is an Assistant Professor of Mechanical Engineering in the Department of Mechanical Engineering at a TX university and a transportation research faculty. She joined the department in 2011 after post-doctoral fellowships at Oak Ridge and Pacific Northwest National Laboratories. She received her Ph.D. from the University of Wisconsin-Madison, and completed her dissertation research in residence in the Fuels, Engines & Emissions Research Group at Oak Ridge National Laboratory. She teaches undergraduate courses in thermodynamics, heat transfer, thermal fluids analysis, engineering ethics, and senior capstone design. She teaches graduate courses in thermodynamics, heat transfer and combustion science. Her research interests are in the area of sustainable energy & environment. Specifically, she studies automotive emissions aftertreatment and remediation of heavy hydrocarbon contamination in soils by applying a suite of chemical and physical characterization techniques.

This expert on Oil and Gas Engineering has been in the industry for 30+ years. He has experience with engineering, engineering management, and forensic engineering investigations. He possesses a thorough understanding of design, construction, and operational needs. He obtained his BS in Mechanical Engineering from New Mexico State University and his MS in Industrial Engineering from the University of Houston. He is a certified Professional Engineer in TX and is currently a Senior Consultant at a private engineering consultant firm.