Health and Safety Expert Witnesses in Oklahoma

This expert is a health & safety expert in oil and gas, construction and mining drawing on his advanced education and about 20 years experience teaching safety practices and techniques reducing incidents and reducing costs/losses. He has worked at a variety of mining, petroleum, and construction companies as their lead environmental health and safety specialist. He has extensive experience drafting and implementing safety and environmental programs and field safety audit systems that comply with OSHA and MSHA standards.

This expert is a Safety Manager/Engineer/Inspector with 20 years of progressive experience and a proven track record implementing safety programs to reduce incidents, improve environments and deliver measurable cost savings. He has a strong background in OSHA, Regulatory and EPA compliance, including advanced training, consulting, and instruction, having worked there for 9 years. He has developed safety policies and procedures during the oversight of more than 110 construction and heavy machinery projects, and has been used as a strategic resource in manufacturing environments through creation of safety management programs. Currently, he is the senior safety consultant at a full service EHS Consultation firm providing safety training , onsite safety staffing, accident investigations and full safety program management and development.

This expert has 38 years experience in Safety Engineering, Loss Prevention & Control, and Accident Investigation & Root Cause Analysis. She has 15 years in OSHA Outreach Training in General Industry and Construction Safety & Health Standards. Additionally, she has consulted with and taught OSHA outreach courses for several State and Federal Agencies, including the Texas Department of Transportation; U.S. Department of the Interior, U.S. Geological Survey; U.S. Department of Labor - Occupational Safety and Health Administration.

This qualified Safety Engineer obtained his BS and MS in Chemical Engineering at the Polytechnic Institute of Brooklyn and earned a Doctor of Business Administration with a focus on Organizational Safety. Licensed as a professional engineer in Florida and certified as a safety professional (CSP), he has completed a considerable amount of additional training in OSHA and HAZOPs, fault tree and Root Cause Analysis (RCA). He began his career in chemical safety in 1972 with Industrial Risk Insurers, and ultimately managed risk engineering services for insurance companies such as Zurich, AIG, and others. He has audited hundreds of industrial plants over the course of his career.

This expert specializes in electrical engineering issues, and has performed numerous investigations into fires caused/allegedly caused by electrical issues. His experience includes evaluation of electronics products and their failure modes to determine whether they adhered to relevant safety standards, including those established by Underwriters Laboratories and the Canadian Standards Association. He has also evaluated products and components for structural wiring compliance with the National Electric Code. His projects have included a wide array of products and components, including but not limited to electronics, appliances, HVAC/R, residential and commercial wiring, and battery failure analysis, with an emphasis on lithium ion battery chemistry. He is a licensed Professional Engineer in multiple states, and holds a Certified Fire and Explosion Investigator certification.

This expert is highly fluent in environmental compliance strategies that take into account state and federal environmental regulations and guidances, and the principles of sound engineering practices. His regulatory expertise includes the regulation and enforcement of hazardous waste, superfund and toxic substance laws and UIC regulations. This expert worked in the U.S. Environmental Protection Agency for 31 years and was EPA's RCRA national hazardous waste expert and one of a few who was also a RCRA and Superfund Remedial Project Manager (RPM). Because of his extensive knowledge, he testified as a government witness in federal court proceedings and inspected and evaluated the largest, most difficult hazardous waste sites involving complicated toxicology and environmental site conditions. He directed the Regional RCRA inspection team and personally evaluated industrial sites, including refineries, oil and gas production and treatment facilities, metal refiners, power plants, and waste disposal sites across the Region to determine their compliance with environmental laws. A registered PE and board-certified environmental engineer, this expert helped the EPA develop policies and rules regarding regulatory compliance, risk assessment, site remediation, and worker health issues at waste disposal sites, hospitals, refineries, oil and gas production and power plants. Since retiring from EPA, this expert has had numerous expert witness engagements where he has written several expert reports and participated in various court proceedings.

This expert specializes in safety/loss prevention, training and facility maintenance, safety program design & development, and retail management. He has more than 20 years of experience serving with retail/wholesale industry leaders, including The Home Depot, Sears, Kohl's, and C&S Wholesale Grocers. Currently, this expert is the owner of a private retail safety consulting firm.

This highly qualified expert has over 45 years of experience in the industrial hygiene and occupational health field. He earned his BS in chemistry and biology from the University of Alabama followed by an MS in environmental health engineering from the University of Cincinnati. He is a certified safety professional and certified industrial hygienist, as well as a licensed professional engineer. He is active in his field as a member of numerous professional societies, including the American Academy of Industrial Hygiene and the Board of Certified Safety Professionals. He has also published and lectured extensively in the environmental health and safety space, and he is an editor for the Applied Industrial Hygiene Journal. He has formerly served as an environmental engineer at the Naval Ordinance Environmental Health Center, as a safety and health compliance officer at OSHA, as the industrial hygiene director at the Naval Nuclear Shipyard and Naval Regional Medical Center, as an OSHA documentation manager for the TVA, and as a corporate director for Alcon Laboratories Pharmaceutical. He is currently a principal at an environmental and occupational health consultancy, as well as the director of the North Texas section of a national industrial hygiene association.

This expert has extensive experience in the field of clinical diagnostic medical physics and magnetic resonance. He earned his BS and PhD in biophysical sciences and medical physics from the University of Minnesota. He is a certified diagnostic & nuclear medical physicist and is board certified in diagnostic physics and as an MR safety expert. He is a member of the American Association of Physicists in Medicine, the International Society for Magnetic Resonance in Medicine, and the Radiological Society of North America. He previously served as a guest lecturer of physics at the University of Minnesota, as a technical aide for the Corporate Research Laboratories at 3M Company, and as a research assistant in the department of radiology and surgery at the University of Minnesota. This expert is currently a medical physics fellow in the imaging physics department at a prominent university cancer center in Texas.

This qualified expert is a certified registered nurse who earned his ASN and BSN from Cox College of Nursing & Health Sciences. He is currently in pursuit of his MSN in family nurse practitioner from Cox College. He is certified in ACLS, BLS, and CPR, and has completed professional development trainings to stay up to date on the latest practices in nursing. He has formerly served as a customer service representative for All Points Risk Assessment and a patient care assistant for Meyer Orthopedic Rehabilitation. Currently, this expert serves as a registered nurse in the same day surgery and cardiac medical-surgical units at a medical center in Missouri.

This expert has over 30 years of experience working in the toxicology and health risk assessment field. He specializes in evaluating potential human health effects of chemical and microbial agent exposures. In particular, he has experience with evaluation of exposures to asbestos, benzene, carbon monoxide, silica, metals, pesticides, solvents, oil and gas fracking chemicals, other petroleum products, and toxic gases. Additionally, he is a Board-Certified Toxicologist as a Diplomate of the American Board of Toxicology and a Licensed Professional Engineer. Currently, this expert is a toxicologist at a privately owned toxicology and human health risk assessment firm.

This is a highly qualified expert who is capable of reviewing the case at hand. He is highly published and has considerable professional and academic experience in the field of ergonomics and engineering, making him capable of commenting on the potential for negligence on the part of the defendant in this case. The areas in which he has consulted with attorneys may be broadly characterized as those involving issues pertaining to ergonomics/human factors, product safety, and occupational safety. In addition to consulting with attorneys, he teaches the senior level Safety Engineering class and the graduate level Ergonomics class in the Industrial Engineering program at the Pueblo campus of Colorado State University where he is an adjunct professor. He also consults with manufacturers on product safety and with employers of various types on workplace safety.

This expert has been a practicing nurse for nearly 20 years. A licensed registered nurse, she received her Bachelor of Science in Nursing from the University of Kansas and her Master of Science in Nursing from the University of Missouri. This expert has extensive experience in quality control and ensuring proper standards and protocols are being followed and met. A Risk Management Consultant for Health Cap/HCRMS, she conduced training workshops and consultation for long-term care facility staff in quality insurance and improvement, risk management, safety management, risk mitigation, and best practices. As a Quality Educator with Primaris, she worked with the Centers for Medicare and Medicaid Services as part of the Quality Improvement Organization for the state of Missouri, educating, consulting, and providing resource materials to skilled nursing staff to promote improvement in resident care. Currently a Clinical Educator and Consultant for a major university, she continues to work with Quality Improvement of Missouri and provides educational presentations throughout the state for long term care facilities, the Missouri League of Nursing, and various hospitals, targeting specific audiences and quality of care issues. This expert is also an independent Nurse Consultant and is experienced in reviewing legal cases as an expert witness, analyzing medical malpractice files, and analyzing standard of care, causation, and damage issues.

This expert has over 35 years of experience in construction engineering. His research includes construction claims, construction safety, alternative energy technology, and waste disposal technology. He has served as Principal Engineer for various companies and, subsequently, legal counsel after receiving his J.D. In addition to serving as President of a consulting engineering company, he currently serves as Professor of Civil and Environmental Engineering as well as Director of Construction Management for a university.

This aviation and aerospace expert is one of the leaders in his industry and has extensive experience in flight test, materials and properties laboratories, unmanned aerial systems, engineering operations, Safety Management Systems and quality. This expert started his career as a United State Army pilot and then advanced to several senior positions with the Federal Aviation Administration(FAA). As Manager Rotorcraft Directorate with the FAA, he was responsible for all FAA Experimental Test Flight policy, training, and administration for over 250 companies. He collaborated with industry to lower the number of fatal accidents from 30 to 14 per year over a five-year average. This expert received the Tony LaVier Award from the Society of Experimental Test Pilots for Lifetime Achievement in Flight Safety. He is a member of numerous prestigious organizations in the aviation field. He has authored 9 publications in the field and is a frequently invited guest speaker at major aviation events. This expert was the 2014 commencement speaker at Embry-Riddle Aeronautical University where he also earned his BS in Aeronautical Technology. He received his MS in Aerospace Management at the University of Tennessee Space Institute. Currently, he is the President of an independent aviation consulting firm and President of an international safety and risk management company serving the aviation industry.

This quadruple board certified doctor completed his postdoctoral fellowship training in Pulmonary and Critical Care Medicine as well as Occupational and Environmental Medicine at Yale University School of Medicine in New Haven. He established the University of New Mexico Occupational and Environmental Lung Clinic in Albuquerque, New Mexico and is board certified in Pulmonary, Critical Care Medicine and Occupational Medicine; a B-reader certified by the National Institute of Occupational Safety and Health (NIOSH); and a teaching faculty member for the annual National Institute of Occupational Safety and Health (NIOSH) spirometry training course held in Albuquerque. He is also a national leader in the field of Occupational Lung Disease within professional organizations like the American Thoracic Society and American College of Chest Physicians and on the advisory board of the sixth edition of the American Medical Association Guides to the Evaluation of Permanent Impairment. He is on the teaching faculty at the respected university in New Mexico, for the Pulmonary and Critical care fellowship programs, as well as the Preventive Medicine and Internal Medicine residency program

This highly qualified Construction Equipment Engineering and safety expert received certification in Industrial management from Aurora University. He is a certified Safety Professional, a well versed OSHA professional, and a member of numerous professional organizations including the American Society of Safety Engineers and the System Safety Society. This expert is an authority in his field with several publications and multiple invitations to lecture as a guest speaker. He is currently Chairman of a major safety institute and a Safety Consultant at a private consulting company.

This expert is a certified OSHA outreach instructor , teaches OSHA compliance, and has spent many years focusing on the safety direction for construction, oil and gas companies. He earned his Masters Degree in Occupational Safety & Health from Columbia Southern University and has held numerous safety management positions. In addition to his leadership roles in the oil and gas space, he is a licensed paramedic. Currently, this expert is the Owner and Operator of an industrial safety school, and the Corporate Safety Director of an oil and gas company. He is completing his Law degree at St. Mary's University School of Law in San Antonio, Texas.

This highly qualified expert has years of experience in the field of workplace safety and engineering management. He received his BS degree in construction science from Lonestar College and his MS degree in engineering management from Texas A&M University. He also obtained his health safety official certification at the University of Texas at Arlington. He is the former owner of Providence Safety Consultants and the former Safety Director at Everest Construction Group. He is also the former Safety Consultant at AMX Companies and the former Safety Coordinator at Greater Metroplex Interiors. Currently, he is the Corporate Safety Director at a major marble and granite fabrication company in Texas.

This expert has several years of property management experience, which includes 4 years of apartment management. For over 11 years he has also performed property safety inspections for major insurance companies. As a professional property manager, he holds the Master Property Manager designation from the National Association of Residential Property Managers. He conducted workshops for their property managers both locally and nationally, and is the author of several Property management classes approved in Texas for continuing education, and the Texas Real Estate Commission has certified the expert as an instructor of property management classes. In addition to authored classes, he has had over 25 property management articles published.