Elevators and Escalators Expert Witnesses in Oklahoma

This expert joined the Departments of Bioengineering and Mechanical Engineering at a major TX University in June 2013 as an Assistant Professor. Prior to joining that university, he was a Research Scientist at the Rehabilitation Institute of Chicago and a Postdoctoral Fellow at Northwestern University. This expert investigates the control mechanisms of human locomotion for the development of high-performance wearable control systems (e.g., robotic prostheses and orthoses) to enable mobility in persons with disabilities. He is a recipient of the NIH Director's New Innovator Award and the Career Award at the Scientific Interface from the Burroughs Wellcome Fund. His work has been recognized with the Best Student Paper Award of the American Control Conference and the IEEE Conference on Decision & Control, the Best Technical Paper Award of the 2011 CLAWAR Conference, and the O. Hugo Schuck Award from multiple control conferences and councils, respectively. He is a Senior Member of the IEEE Control Systems Society and the IEEE Robotics & Automation Society.

This engineering expert has a master's degree in Metallurgical Engineering and a Ph. D. in Industrial Metallurgy. He has worked as a Professor of Mechanical Engineering and Engineering Technology since 1987 and currently is tenured at a public university in North Texas. In addition, he actively consults and has worked on several failure analysis cases as an expert witness in the area of defects in materials, corrosion, materials selection, and manufacturing processes. The expert is a Member of the National Association of Corrosion Engineers and has published 12 research/technical reports.

This expert is an Assistant Professor of Mechanical Engineering in the Department of Mechanical Engineering at a TX university and a transportation research faculty. She joined the department in 2011 after post-doctoral fellowships at Oak Ridge and Pacific Northwest National Laboratories. She received her Ph.D. from the University of Wisconsin-Madison, and completed her dissertation research in residence in the Fuels, Engines & Emissions Research Group at Oak Ridge National Laboratory. She teaches undergraduate courses in thermodynamics, heat transfer, thermal fluids analysis, engineering ethics, and senior capstone design. She teaches graduate courses in thermodynamics, heat transfer and combustion science. Her research interests are in the area of sustainable energy & environment. Specifically, she studies automotive emissions aftertreatment and remediation of heavy hydrocarbon contamination in soils by applying a suite of chemical and physical characterization techniques.

This expert on Oil and Gas Engineering has been in the industry for 30+ years. He has experience with engineering, engineering management, and forensic engineering investigations. He possesses a thorough understanding of design, construction, and operational needs. He obtained his BS in Mechanical Engineering from New Mexico State University and his MS in Industrial Engineering from the University of Houston. He is a certified Professional Engineer in TX and is currently a Senior Consultant at a private engineering consultant firm.

This highly qualified expert has over 25 years of experience in the chemical and petrochemical industries. He earned his B.S., M.S., and Ph.D. in Chemical Engineering from Brigham Young University. The expert has worked in academic roles throughout his career, including adjunct professor roles at the University of Michigan and the University of Utah. He has also been very active in industrial positions and held research roles with Dow Chemical Company and John Zink Company, among others. The expert has published 45+ papers, has authored 5+ book chapters, and holds 8 patents. He is an active industry consultant and currently serves as a Professor of Chemical & Nuclear Engineering for a university in Missouri.

This well-qualified expert earned his MS in Mechanical Engineering from the Polytechnic Institute of Bucharest [Romania], his MBA in International Economic Relations from the Academy of Economic Sciences [Romania], and his PhD in Engineering from North Dakota State University. He is active in his field as a member of several professional organizations, including the American Society for Engineering Education, the American Society of Mechanical Engineers, the Society of Automotive Engineers and the American Management Association. This expert has been granted 10 patents as contribution to innovation in his field. Formerly, he was the Vice President of Engineering for PRISM Enterprises, Inc., an Adjunct Professor of Physics, Engineering and Architecture Department at San Antonio College, and a Senior Design Engineer & Project Manager for Kinetic Concepts, Inc. He is currently an Engineering Coordinator for a top college, the Co-Director for a Science & Mathematics Education Program in a top university, as well as an Adjunct Professor in the School of Engineering for a top university.

This expert in technical documentation and mechanical engineering has over 35 years of professional experience. He completed his AAS in electrical engineering and his BS in mechanical engineering from NEC and Texas Tech University. He is skilled in electrical, mechanical, hydraulic, HVAC power distribution, in addition to HTML SGML and other programs. Formerly, he has served as a technical writer at Allard, the director of content development at Zane Publishing, and a manager of technical publications at USDATA. Currently, this expert is a senior technical writer at a TX technical documentation firm.

This highly-qualified expert has over 35 years of experience in HVAC and plumbing design. He earned his BS in mechanical engineering from Texas Tech University. He's active in his field as a member of several organizations, including the Academy of Mechanical Engineers and the American Society of Heating, Refrigerating and Air Conditioning. This expert is a licensed professional engineer in 16 states. He has formerly served as a project engineer, principal, and secretary/treasurer for Fanning, Fanning, & Associates. Some notable projects he has worked on with Fanning, Fanning, & Associates include the El Paso Medical Education Building at Texas Tech University and the USDA Cotton Classing Lab. Currently, this expert is the president of an engineering consulting firm based in Texas.

This expert has 40 years of experience as a mechanical engineer. His work has focused on heat transfer, cryogenics, high vacuum, structural and thermal analysis, thermodynamics, vibration analysis, safety, electromagnetics, explosives, printed circuit boards (PCBs), and fluid flow. He obtained his BS in mechanical engineering at San Diego State University and earned a graduate certificate in systems engineering from the Air Force Institute of Technology. He actively participates in professional development to stay up to date on the latest practices in his field. This expert is a registered professional engineer in New Mexico and is active in his field as a member of the American Society of Mechanical Engineers. He has formerly served as a test conductor for Martin Marietta, lead design engineer for Beech Aircraft/Ball Aerospace, and an engineer for Cryogenic Companies, JAYCOR, and UTC/Goodrich. Currently, this expert is an engineer for a missiles manufacturer in New Mexico.

This expert has been working in consumer electronics and electrical utilities for over 30 years, and has extensive experience with solar panels, electronics manufacturing, data analytics, semiconductor packaging, and portable electronic products. He earned BS and MS in mechanical engineering from the University of Wisconsin and the University of Rochester, respectively. He holds 4 patents including in low profile managed memory components and high-density electronic connectors. He formerly worked as a director of product marketing at Motion Computing and Staktek and as director of product development at Heliovolt. He also served as a chief technical officer at Pecan Street Incorporated. This expert is currently a chief technical officer and vice president of engineering at a solar energy start-up in CO.

This qualified expert earned both his BS in mathematical and computer sciences as well as mechanical engineering from the Colorado School of Mines. He is a licensed professional engineer in Colorado and California and is certified as a traffic accident reconstructionist, crash data retrieval data analyst and download technician. He is also licensed as a commercial drone remote pilot. He is active in his field as a member of the Society of Automotive Engineers, the National Society of Professional Engineers and the National Association of Professional Accident Reconstruction Specialists. Formerly, this expert served as a mechanical engineering intern at Knott Laboratory and as a project engineer at Ponderosa Associates Ltd. Currently, he serves as an engineer at an accident reconstruction and analysis firm in Colorado where he specializes in the investigation, reconstruction, and analysis of motor vehicle accidents including automobiles, heavy vehicles, bicycles, motorcycles and pedestrian impacts.

This highly-qualified expert is an MIT-trained engineer specialized in mechanical engineering, process engineering, oil and gas, flow assurance, and thermal-hydraulics with 40 years of experience in his field. After graduating from the industrial engineer program at the Universidad Católica Andrés Bello in Venezuela, he went on to study at MIT, earning an MSc, an ME, and a PhD. He is a licensed professional engineer in the state of Texas and is a Bechtel-certified engineering supervisor and project engineering manager, as well as a Bechtel distinguished engineer. This expert is active in his field as a member of several organizations, including the Society of Petroleum Engineers, the American Society of Mechanical Engineers, and the American Society of Heating, Refrigerating and Air-Conditioning Engineers. He worked as an engineer for several firms in Venezuela for over 25 years before moving to the United States to serve as BP America's process engineering team coordinator. He then went on to serve as a process engineering manager for Jacobs Engineering and a flow assurance manager for both Technip and Bechtel Engineering. He has received several honors and awards for his work, including being the first Hispanic recipient of the Madam Curie Research Grant. Currently, this expert serves as the president of a mechanical, process, and flow assurance engineering consulting firm in Texas.

This highly qualified aeronautics expert earned his masters and PhD in Aeronautics and Astronautics from MIT. He is a fellow in the American Society of Mechanical Engineers, and an associate fellow in the American Institute of Aeronautics and Astronautics. He has authored more than 100 publications in the aeronautics space and is currently a Professor of Aerospace Engineering at a top midwest university.

This board certified forensic engineer earned his BS and MS in Mechanical Engineering and PhD in Technical Science. He is also a fellow of the National Academy of Forensic Engineers and a member of the National Society of Professional Engineers. This expert has published an extensive body of literature in his field, and has given nationally invited lectures and presentations at such prestigious institutions as Johns Hopkins. He has qualified as an expert witness before several state and federal courts. Currently, this expert is the President and CEO at a major engineering research laboratory.