Elevators and Escalators Expert Witnesses in North Carolina

This highly qualified mechanical engineer earned his BS in Mechanical Engineering from City College of New York, his MS in Mechanical Engineering from Rensselaer Polytechnic Institute, and his PhD from the University of Connecticut. He has been formally trained in a number of engineering disciplines, including accident investigation and labels/warnings/failure to warn instructions. He belongs to a number of highly prestigious societies in the engineering field, including the International Code Committee and the American Society of Safety Engineers. Additionally, he possesses in-depth knowledge to reach the root cause of a wide range of accidents and failures in the following areas: turbines, human performance, operator training, man-machine interface, material science, structures, statics, dynamics, pneumatics, hydraulics, lubrication, fire protection sprinkler systems, elevators, cranes, hoists, escalators, aerial platforms, fork lifts, warning labels and instructions, failure to warn, OSHA standards and requirements, heat transfer and thermodynamics. This expert currently serves as an engineering consultant.

This well credentialed expert earned his B.S. in Mechanical Engineering from George Washington University, his M.S. in Mechanical Engineering from Virginia Tech, and his Ph.D. in Mechanical Engineering from George Washington University. He has held academic positions at various levels dating back to the 1980s and currently serves as a Professor of Mechanical Engineering and the Department Head for a leading public research university in Virginia. His areas of engineering expertise include mechanical engineering, control systems, dynamics, robotics, intelligent vehicles, and transportation safety. He focuses his efforts on several application areas, including automotive safety systems, vehicle dynamics and control, collision warning/avoidance, and autonomous vehicles. The expert has co-authored 2 books and 7 book chapters, as well as numerous other publications (over 160), and he has received 1 patent.

This expert earned his BS in mechanical engineering from the University of Texas at Austin and his MS in product design engineering from Stanford University. He has seven years of industry experience working as a product designer for Ford Motor Company and Volkswagon of America. He has over fifteen years of experience designing products for automotive and home electronics clients. This expert is currently a professor of industrial design at a university in Georgia and the principal of a design and engineering consultancy.

This expert has 40 years of experience in mechanical engineering, specializing in engineering simulation, heat transfer, and fluid dynamics. After earning her BS in math and physics from Heidelberg College, she earned her BS in engineering physics and MS in mechanical engineering from the University of Toledo. She also obtained her PhD in mechanical and aerospace engineering at the University of Virginia before beginning a highly successful career in mechanical engineering research and engineering software. She is active in her field as a member of numerous professional organizations and as the author of over 80 journal articles, technical reports, web articles, and seminar presentations. Some of her former positions include serving as the president of Blue Ridge Numerics, Inc., as the vice president of product development for Compuflo, Inc., and as a professor of mechanical and aerospace engineering at the University of Virginia. In these roles, she conducted extensive research and directed technical simulation software development for 3 companies. Currently, this expert is a senior architect for a technology company.

This expert has extensive experience in naval security and the international and domestic defense industry. He earned his BS in mechanical engineering from the US Naval Academy. During his 37-year career with the Navy, he served as a senior naval officer, as a director of warfare requirements, and as a military commander for the Iceland Defense Force. This expert then went on to serve as the corporate direction of naval aviation programs at Lockheed Martin and as the director of business development at Raytheon. Currently, this expert serves as the president of an independent defense industry consultancy in Virginia.

This expert has over 15 years of experience as an emergency medicine physician. He earned his BS in mechanical engineering from the United States Military Academy and his MD from the University of Mississippi before subsequently completing his residency in emergency medicine at the Morristown Memorial Hospital and his fellowship in critical care medicine at the University of Alabama at Birmingham. He is board certified in emergency medicine and is active in his field as a member of the American College of Emergency Medicine. Before transitioning to the medical field, this expert served in the army for 5 years and spent 6 years working for Swayze and Church as a mechanical engineer. He then went on to work at the University of Alabama at Birmingham, serving as the assistant medical director of critical care transport, an associate professor of emergency medicine, the director of the critical care fellowship, and an attending physician in the surgical intensive care unit. He has also served as the medical director for Pegasus Emergency Group, the regional medical director of the East region for AlignMD, and the medical director of the emergency department at Blount Memorial Hospital. Currently, this expert serves as the co-medical director of the emergency team at a medical school in Alabama and as an attending physician of emergency medicine for a health system in Mississippi.

This highly qualified expert has over 30 years of experience as an engineer. He received a B.S. in Mechanical Engineering from the Georgia Institute of Technology and is a Registered Professional Engineer in 9 states. A member of both the American Society of Mechanical Engineers and the National Academy of Forensic Engineers, he has published several articles on various issues including cranes and plumbing failures. He previously worked for Georgia Power Company where he maintained different plant aspects and addressed deficiencies. He also worked at Cerny & Ivey Engineers, Inc. where he managed the engineering and technical staff as well as mechanical/electrical/structural engineering and testing responsibilities. He currently serves as President and Principal Engineer for an engineering company that consults in failure investigations, safety, design, and products and materials testing.

This hospitality expert has extensive experience in facilities management, corporate compliance, and social responsibility. He has held numerous positions at top international hotel chains including Marriott International and The Ritz-Carlton. His positions have included leading overall maintenance of hotels and training individuals in proper maintenance and safety procedures. He has extensive experience leading teams of engineers and hotel directors in hotel operations. Currently, this expert is a hospitality consultant focusing on facilities management training and operational standards.

This expert is a nationally renown expert in automotive engineering and currently is Professor of Mechanical Engineering at a top ten automotive design and engineering school, where he also holds the position of Director of Center for Vehicle Systems and Safety and the Railway Technologies Laboratory. This expert is the founding director of the Virginia Institute for Performance Engineering and Research and the Advanced Vehicle Dynamics Laboratory. He has authored more than 200 technical publications, and has made more than one hundred technical presentations in topics related to advanced technologies for ground vehicles. He holds seven U.S. and international patents, and has edited three technical volumes. He is currently Associate Editor of AIAA Journal and the journal of Shock Vibration, and has served as Associate Editor for ASME Journal of Vibration and Acoustics. This expert is a Fellow of American Society of Mechanical Engineers and a member of the Society for Automotive Engineers. He earned his PhD in Mechanical Engineering at State University of New York at Buffalo.

This expert is a registered professional mechanical engineer with extensive hands-on experience in thermodynamics and testing. He earned his Masters and PhD in Mechanical Engineering from Georgia Institute of Technology. He has held a number of engineering positions and is currently a Professor of Mechanical Engineering focusing on thermodynamics at a technical university in the Atlanta area. Primary activities have focused on basic and applied research in the areas of constitutive model development and processing, mechanical property characterization, and structural testing & analysis for advanced materials including high performance and ultra-lightweight polymers, polymeric composites, and metals. Specifically, areas of expertise include formulating new constitutive relationships and associated experimentally-based methodologies for characterizing the time, rate, environmental, and temperature dependent mechanical response of materials; the development of laboratory testing techniques and instrumentation for investigating and determining structural and material behavior, low velocity impact effects, and related phenomenological events in composites; and the development of analytical and numerical methods for characterizing and modeling the environmental degradation, long-term durability, and damage tolerance of polymer matrix composites and MEMS structures. Current topics include experimental mechanics, MEMS, structural analysis and design, rheology, thermochemical analysis, fatigue life assessment and prediction, micromechanics and long term durability.

Please see full CV