Construction Expert Witnesses in California

This expert specializes in all aspects of the roofing industry -- he is a registered professional engineer (CA, NV, MN), a registered roof consultant, a well-published author on a variety of roofing issues, and a distinguished fellow of the Roof Consultants Institute. This expert holds a Masters Degree in Civil Engineering and has spent more than 30 years investigating, designing, and providing consulting services regarding roof and waterproofing systems. He is a member of the Board of Directors for both the Cool Roof Rating Council and the Special Interest Group for Dynamic Evaluation of Roofing Systems. This expert is the President of Technical Roof Services where he provides a full range of roof, waterproofing, building envelope, and solar PV consulting services including condition evaluations, failure investigations, defect investigations, construction documentation, condensation analysis (hygrothermal modeling), surveys for wet insulation, and construction observations. This expert is a well known speaker on roof technology.

This expert is a certified master electrician, commercial electrical inspector, licensed electrical contractor, and NEC expert. He also completed an OSHA 30 hour construction safety training course. He is a member of both the National Fire Protection Association and the International Association of Electrical Inspectors. He has spent multiple years as a foreman and journeyman electrician on multiple electrical projects, and is currently an education projects manager with a vocational teaching credential instructing electronics, electrical wiring and theory, and electrical contracting.

This expert has worked within the ceramic tile, stone, and terrazzo industries for more than 35 years and is a leading forensic consultant in the space. He has been certified as a Ceramic Tile Consultant through the Ceramic Tile Institute of America. This expert is a member of the industry standard committees ANSI, ASTM, ISO and a participant on the TCNA Handbook Committee. He worked for 17 years as an importer/distributor of ceramic tile and stone (marble, granite, etc), and worked for 7 years as a manufacturer of installation products and systems for these materials. He belongs to a number of prestigious societies in the field, including the Building Stone Institute and the Construction Specification Institute. Currently, this expert is the president and owner of a ceramic tile and stone consulting service.

This highly qualified expert currently serves as Director of Facilities at a major casino and hotel. He oversees the facilities maintenance department that is comprised of 100 team members that include 71 EVS attendants, 2 construction & development project managers, 2 waste water technicians, and 20 facilities team members. One of his major accomplishments includes designing, developing, and implementing a safety program for the facilities department. He is a member of the operations committee and the safety committee and served as Chairman for the fire prevention subcommittee. He has received awards for his performance as a facilities leader and he has served in a variety of facilities maintenance capacities.

This expert has more than 20 years in the Residential and Commercial construction industry, including 10+ years in Project Management and on/site Supervision for projects ranging from 10K to 5MM with 5-10 employees plus subcontractors. He has experience in planning and scheduling, architectural and structural drawings, developing bids and proposals, materials management, purchasing, invoicing, submittals & samples, code requirements, contracts and change orders. He is currently the Construction Superintendent at a construction company where he is responsible for running the day to day operations on high end residential construction sites in the San Francisco Bay Area.

This supremely qualified fire origin and cause investigation expert has served as a municipal fire marshal for over 20 years, and is a certified fire investigator who is the proprietor of a private fire investigation and fire/building code consulting firm.

This former Chief California State Fire Marshal is a consummate expert in fire protection, building codes, and window safety. He has over 40 years of hands-on expertise and currently serves as Executive Director of the National Code Services Association. He also served as the Chair of California‟s Special Arson Task Force and has extensive experience in the investigation of fire origin, cause and spread and also negligence of fire department operations and management. He is a leading expert in window safety and serves on the National Safety Council's Window Safety Task Force.

This expert has over 35 years of experience in the field of bridge design and construction. He earned his BS at the Portuguese Military Academy, and a Graduate Engineering Diploma and MS in Structural Engineering at the University of Witwatersrand (Johannesburg, South Africa). He is certified as a Professional Civil Engineer, as an Expert Analyst in Finite Elements Methods, and as an Advanced Concrete Technologist. He has previously served as a Senior Regional Bridge Engineer for the SE of the US and South America while working for AECOM, Head of Structural Design for Consulgal, and has worked on a number of projects as a freelance Expert Consultant in Structural and Bridge design and construction. He currently serves as a Senior Supervising Engineer for an Engineering company ranked at the top 20 in the US, in their Irvine office in California.

This expert has over 34 years experience working in the construction equipment rental industry across the country. He has worked in the construction equipment rental industry in Southern California for 30 years. He has held positions such as Branch Manager, Purchasing Agent and General Manager while working in the industry.

This impressive expert received his BS in Civil Engineering from the University of Southern California and his MS in Civil Engineering from Stanford University. A registered Professional Engineer in California, he has been awarded the USC Mellon Mentoring Award. Formerly, he was a principal engineer and principal construction manager at Trojan Construction Management, the vice president of construction at Kaufman & Broad, and a project engineer and estimator at George A. Fuller Company. Currently, he is the program director of Civil Engineering, a professor of Engineering Practice, and the founding program director of Construction Management at a prestigious university in Los Angeles.

This highly qualified occupational safety and health expert has over thirty years of experience. He earned his BS in occupational safety and health from Columbia Southern University. He is a board certified safety professional, environmental safety and health trainer, and construction health and safety technician. This expert is also a certified hazardous materials manager. He is a member of the American Society of Safety Engineers, the National Safety Management Society, and the ASSE Construction Safety Division. He remains current in his field by publishing and presenting on issues ranging from emergency response to construction safety. Formerly, he served as a hazmat rescuer and construction safety specialist in California. He is currently the environmental health and safety director for a site safety consultancy.

This health and safety professional has more than three decades of experience in industrial hygiene, occupational exposures, safety, and public health. Throughout his career, this expert has personally conducted over a thousand industrial hygiene evaluations for numerous companies in various fields including engineering, mining, manufacturing, oil & gas, healthcare, environmental, pharmaceutical, biotechnology, food processing, agriculture, and construction. As a Certified Industrial Hygienist and Certified OSHA HAZWOPER, he evaluates, develops, and oversees health & safety programs and plans, conducts hazard/risk assessments and ergonomics surveys, and assesses work practices, engineering controls, and personal protective equipment. He currently serves as a Partner and Principal Industrial Hygienist for California-based occupational and environmental health & safety consultancy.

This expert has over 35 years of experience in the field of construction safety. He earned his BBA in finance from the University of Utah and is a licensed general contractor in California. He is board certified as a construction health and safety technician and as a safety and health manager. He is a member of the American Society of Safety Engineers. He previously served as an instructor at the OSHA training institute, as the safety director at Nielsen Dillingham Builders, Inc. and as a principal at California Crane Works. He is currently a principal at a construction safety consultancy in California.

This expert is highly qualified in construction-related matters, boasting over 35 years of experience in the industry. He is licensed as a general contractor in the state of California. He served as a carpenter for Argus Construction, John Frank Construction, Perfection Woodworking, and Coastline Construction. With these companies, he worked on various types of commercial and residential projects, including grocery store remodeling and wood installation for apartment complexes. He has also done work specializing in door and window installation, replacement, and waterproofing. While working for Phoenix Construction, he was the lead mechanic, doing work on both the construction and maintenance of railroad bridge, track, and signage. This expert is currently the owner of a commercial and residential construction company in California.

This highly qualified expert has over 30 years of experience in the planning, design, investigation, analysis, and quality control processes of residential, institutional, commercial, and industrial construction projects. He received his BS from the Evergreen State College, before entering the field of architecture. He is a registered architect and a licensed general contractor in the state of California. This expert is active in his field as a member of the American Institute of Architects and the Construction Specification Institute. Previously, he served as a senior planner for the Nisqually Indian Tribe, an advanced drafter for Krommenhoek, McKeowen & Associates, a designer and job captain for SGPA Planning and Architecture, a site planner at Schoell and Paul Architecture and Planning, and as a partner and project architect at FAD Architecture and Planning. Currently, he is the president of an architectural firm in California.

This highly qualified expert has over 40 years of experience in metallurgy and metallurgical failure analysis, with expertise in metallurgical engineering, failure analysis, materials solutions, welding and corrosion consulting in stainless steel, aluminum alloys, copper-based alloys, titanium alloys, nickel-based alloys, and high alloys. He earned his BS in metallurgical engineering from California Polytechnic State University. This expert is a registered professional engineer in metallurgy and is active in the field as a member of the American Welding Society, the American Society of Mechanical Engineers, and the American Society for Metals. He has previously held a Level II certification in radiographic and ultrasonic testing and a Level III certification in magnetic particle, liquid penetrant, and visual testing through the American Society for Nondestructive Testing. This expert has previously served as a hydraulics mechanic for USMC Aircraft, a sheet metal mechanic for Rohr Corporation, plant metallurgist for United Centrifugal Pumps, and staff metallurgist for Sunstrand. He also worked on the Lockheed MSD engineering co-op program and EG&G Services nuclear plant construction. For 35 years, this expert has served as the owner and consulting engineer for a private metallurgy and engineering consultancy in California.

This expert has over 35 years of experience in parking design and planning. He graduated from the University of Northern Iowa with a BA in construction management. He is a member of the National Parking Association and the International Parking Institute. He was formerly a parking consultant with the planning division of the Allright Corporation before becoming vice president of parking for Allright. He also served as a senior parking consultant for International Parking Design. Currently, he is a partner at a parking design group and splits his time between California and Iowa.

This highly-qualified expert has extensive experience in the field of construction, with his work involving the roles and responsibilities under contract documents, contract administration, contractor standards of care, construction costs, and scheduling delay and disruptions. He received his BA from Clemson University before earning his MBA from Pepperdine University. He also frequently participates in professional development courses to stay up to date on the latest practices in his field. He holds numerous certifications, including certifications as a building inspector, mechanical inspector, plumbing inspector, professional estimator, construction contract administrator, and in OSHA 30 hour construction and general industry. This expert is licensed as a general engineering contractor, a general building contractor, and a hazardous substance removal and remedial action contractor. He has formerly served as a foreman fro Aspen Construction Company, the president of Azimuth Builders, and the chief operating officer of Anson Construction Company. Currently, this expert is the owner of a construction and environmental consultancy in California.

This highly qualified expert has nearly 60 years of experience as a chemical and mechanical engineer. He has demonstrated experience in a number of areas including: speciality and industrial chemicals, petrochemicals, polymers, fertilizers, phosphoric and sulfuric acid, phosphate, mineral processing, dyestuffs and intermediates, coal and coal chemicals, industrial wastewater treatment, cryogenics, gas liquefaction, refinery units, boilers, utilities, cryogenics, sulfur plants, engineered materials, building materials, food processing, animal feed, pipelines, and marine terminals. This earned his BS in chemical engineering from Cairo University, is a fellow of the Institute for the Advancement Of Engineering, and has 3 patents published through the United States, as well as 6 additional patents pending. This expert began his career as a chemical engineer at Chemicoke before going on to serve as a construction engineer at Engineering General Company, a development engineer and industrial chemist at Wunderlich Limited, a chemical engineer at The Austin Company, the chief mechanical engineer at McDonald Engineering Construction Group, a process projects engineer at Superior Air Products, a project engineer at Ralph Parsons, and both a proposal manager and project manager at Occidental Petroleum Corporation. For the past 37 years, this expert has served as the chief engineer at an independent engineering firm in California.

This expert has over 40 years of experience in the construction and insurance industry. He is a licensed insurance adjuster and general adjuster and is certified in fraud in the property casualty insurance industry. He is a member of the Sacramento Claims Association and the Forensic Expert Witness Association. He previously served as a forensic construction consultant at the Forensic Group, as a wastewater consultant at Shanghai China, Municipal, and as a consultant at Indoor Environmental Institute. This expert is currently a general adjuster and forensic construction consultant in California.

This highly-qualified expert has over 20 years of experience in electrical and electronics engineering, rail transit systems design, construction, project management, light rail vehicle, and field wayside maintenance areas. He earned his BS in electrical and electronics engineering from California State University at Sacramento and his MBA in strategic leadership from Amberton University. He is licensed as a registered professional engineer in California. He formerly served as a technologist for Bechtel Power Corporation, a stop and zones technician and acting administrator for Orange County Transportation Authority, a project engineer for DCM Industries and Balfour Beatty Rail Systems. He also served as the associate systems design engineer for the Santa Clara Valley Transportation Authority, working with the Bay Area Rapid Transit (BART) team on the Silicon Valley Rapid Transit (SVRT) BART Extension Project. Currently, this expert is a senior systems engineer of rail operations for a local transportation authority in California.

This highly-qualified expert has over 40 years of experience in electrical engineering, with his work focusing on high voltage electric power transmission, distribution, and substation design, construction, operations & maintenance, control centers, and in particular electrical safety. He is also exceptionally familiar with industrial, commercial, and residential electrical systems, including the vast array of industry standards, codes, and best practice applications. He received his BS in electrical engineering from California State University before earning his MS in electrical engineering from the University of Nevada. A licensed professional engineer in the state of California, this expert is also certified by the North American Electric Reliability Corporation as a reliability coordinator and is licensed by the FCC in general radiotelephone, advanced class amateur radio, and as a global maritime distress safety system operator and maintainer. He is active in his field as an author of multiple textbooks and publications on the subject of electric power and is a member of several professional organizations, including the Institute of Electrical and Electronics Engineers and the National Association of Radio and Telecommunications Engineers. He worked for NV Energy for 15 years, as a telecommunications operations supervisor, a relay protection operations supervisor, a senior distribution engineer, and a senior substation design engineer. For the past 27 years, this expert has served as an electrical engineering consultant for an electric power engineering and safety consulting firm based in California.

This premises liability expert is a member of the American Society of Safety Engineers and is a credentialed safety engineer with over 20 years of experience in his field. He has also published several articles on concepts in safety and design.

This master electrician has almost 40 years of hands on experience. His areas of expertise include national electrical code compliance, safety code compliance, high voltage electrical safety orders, grounding and bonding of electrical systems, electrical line contact, high voltage contact, power plant wiring, ANSI standards, electrical patent infringement, accident investigation and OSHA standards. He is currently a private electrical contractor in California.