Construction Safety Expert Witnesses in Arkansas

This expert is a Safety Manager/Engineer/Inspector with 20 years of progressive experience and a proven track record implementing safety programs to reduce incidents, improve environments and deliver measurable cost savings. He has a strong background in OSHA, Regulatory and EPA compliance, including advanced training, consulting, and instruction, having worked there for 9 years. He has developed safety policies and procedures during the oversight of more than 110 construction and heavy machinery projects, and has been used as a strategic resource in manufacturing environments through creation of safety management programs. Currently, he is the senior safety consultant at a full service EHS Consultation firm providing safety training , onsite safety staffing, accident investigations and full safety program management and development.

This expert has 38 years experience in Safety Engineering, Loss Prevention & Control, and Accident Investigation & Root Cause Analysis. She has 15 years in OSHA Outreach Training in General Industry and Construction Safety & Health Standards. Additionally, she has consulted with and taught OSHA outreach courses for several State and Federal Agencies, including the Texas Department of Transportation; U.S. Department of the Interior, U.S. Geological Survey; U.S. Department of Labor - Occupational Safety and Health Administration.

This qualified Safety Engineer obtained his BS and MS in Chemical Engineering at the Polytechnic Institute of Brooklyn and earned a Doctor of Business Administration with a focus on Organizational Safety. Licensed as a professional engineer in Florida and certified as a safety professional (CSP), he has completed a considerable amount of additional training in OSHA and HAZOPs, fault tree and Root Cause Analysis (RCA). He began his career in chemical safety in 1972 with Industrial Risk Insurers, and ultimately managed risk engineering services for insurance companies such as Zurich, AIG, and others. He has audited hundreds of industrial plants over the course of his career.

This Tennessee based expert entered the waste management industry in 1988, joining the old Browning-Ferris Industries as a District Manager of Environmental, Safety and Health for the Nashville District, covering 22,500 square miles. He was responsible for hiring, training, risk management, claims and compliance with OSHA, DOT and EPA regulations. He later became the Director of Solid Waste for the city of Franklin, TN, where he oversaw the conception and completion of a Municipal Services Complex that included a new 500-ton per day transfer station and 20,000 square foot operations center. He has been a member of the Solid Waste Association of North America for almost twenty years, and is certified to teach in Collections, Transfer Station, Recycling, Integrated Solid Waste Management and Principals of Solid Waste Management. He has written or edited numerous textbooks for the organization.

This expert has more than 30 years of experience in the construction of sports facilities, including a large variety of athletic surfacing in over 500 facilities all over the world. He has installed and managed the construction of many different synthetic turf facilities, track and field facilities and various natural grass facilities and tennis courts. A certified field builder and track builder with the American Sports Builders Association and an active member of the Sports Turf Managers Association, he has managed projects for a variety of providers in the artificial turf industry.

This qualified expert received his BA from Valparaiso University and is a licensed OSHA trainer for numerous courses. He has managed various construction safety projects including the installation and modification of industrial equipment valued at over a billion dollars. Formerly, he served as a night safety manager for Gallagher Kaiser at General Motors and as a safety manager for NKC American at Toyota Motor Manufacturing. He currently is the safety manager for a prominent aluminum manufacturer overseeing the installation of a new stamping bed.

This highly qualified project and construction management expert has over 30 years of professional experience in his field. He received his BS in industrial engineering and technology from East Central University and his MBA from Robert Kennedy College. He is a certified facilitator of incident and root cause analysis investigations and is certified by OSHA in construction safety. He has published over 15 papers, publications and manuals related to topics in his field. Formerly, this expert has held roles as a contractor at Willbros International and Parsons E&C. Additionally, he has served as a construction manager at Parsons/Enron International, as a contracted engineer at Willbros Engineering, a senior advisor for Frontier Energy, LLC., and as a senior construction consultant at Keystone XL Pipeline. Currently, this expert is the vice president of planning at an OK energy service.

This highly qualified expert has over 45 years of experience in the industrial hygiene and occupational health field. He earned his BS in chemistry and biology from the University of Alabama followed by an MS in environmental health engineering from the University of Cincinnati. He is a certified safety professional and certified industrial hygienist, as well as a licensed professional engineer. He is active in his field as a member of numerous professional societies, including the American Academy of Industrial Hygiene and the Board of Certified Safety Professionals. He has also published and lectured extensively in the environmental health and safety space, and he is an editor for the Applied Industrial Hygiene Journal. He has formerly served as an environmental engineer at the Naval Ordinance Environmental Health Center, as a safety and health compliance officer at OSHA, as the industrial hygiene director at the Naval Nuclear Shipyard and Naval Regional Medical Center, as an OSHA documentation manager for the TVA, and as a corporate director for Alcon Laboratories Pharmaceutical. He is currently a principal at an environmental and occupational health consultancy, as well as the director of the North Texas section of a national industrial hygiene association.

This highly qualified expert has nearly 20 years of experience in theme park attraction safety. He earned his BA in education and pre-law from Georgia State University. He holds several certifications, including tourism ambassador, Level II attractions operator, attractions leader, crowd manager supervisor, and OSHA's 10-hour general industry health and safety training. He has formerly served as the director of attractions for the Georgia Renaissance Festival, operations manager for the Netherworld Haunted House, attractions supervisor for Stone Mountain Park, general manager of Dixieland Fun Park, and director of attractions and executive director of entertainment events for the Queen Mary. Currently, this expert serves as the chief of visitor experience for a Smithsonian Affiliate museum in Texas.

This highly-qualified workplace safety and accident investigation expert has over 30 years of experience in her field as a certified health safety official and certified OSHA approved trainer. She earned her AAS in occupational safety and health from Texas State Technical College and a BS in occupational safety and health from Southwest University. Formerly, she has held positions as vice president of safety and industrial hygiene training for the American Institute of Hazardous Materials Management, the manager of safety, environmental, and industrial hygiene for Fairchild Aircraft Company, a division safety manager for Coca-Cola Enterprises, Inc., and the United States director of health, safety, and environment for Exel, Inc. She currently is an independent private injury and accident reconstruction consultant in Texas.

This expert has over 35 years of experience in construction engineering. His research includes construction claims, construction safety, alternative energy technology, and waste disposal technology. He has served as Principal Engineer for various companies and, subsequently, legal counsel after receiving his J.D. In addition to serving as President of a consulting engineering company, he currently serves as Professor of Civil and Environmental Engineering as well as Director of Construction Management for a university.

This highly qualified Construction Equipment Engineering and safety expert received certification in Industrial management from Aurora University. He is a certified Safety Professional, a well versed OSHA professional, and a member of numerous professional organizations including the American Society of Safety Engineers and the System Safety Society. This expert is an authority in his field with several publications and multiple invitations to lecture as a guest speaker. He is currently Chairman of a major safety institute and a Safety Consultant at a private consulting company.

This expert is a certified OSHA outreach instructor , teaches OSHA compliance, and has spent many years focusing on the safety direction for construction, oil and gas companies. He earned his Masters Degree in Occupational Safety & Health from Columbia Southern University and has held numerous safety management positions. In addition to his leadership roles in the oil and gas space, he is a licensed paramedic. Currently, this expert is the Owner and Operator of an industrial safety school, and the Corporate Safety Director of an oil and gas company. He is completing his Law degree at St. Mary's University School of Law in San Antonio, Texas.

This highly qualified expert has years of experience in the field of workplace safety and engineering management. He received his BS degree in construction science from Lonestar College and his MS degree in engineering management from Texas A&M University. He also obtained his health safety official certification at the University of Texas at Arlington. He is the former owner of Providence Safety Consultants and the former Safety Director at Everest Construction Group. He is also the former Safety Consultant at AMX Companies and the former Safety Coordinator at Greater Metroplex Interiors. Currently, he is the Corporate Safety Director at a major marble and granite fabrication company in Texas.

This highly qualified expert has more than 40 years of international experience in the development and implementation of occupational health, safety, and environmental (HSE) management systems within the petroleum, petrochemical,manufacturing, and construction industries. He is an advisor to management on regulatory compliance with worldwide agencies such as BSEE, EC, OSHA, HSE, PSA, SSM, DEA, USCG, MSHA, MMS, NOPSA and other applicable industry standards and codes. He is experienced with ISO, ISM, Injury Incident Free (IIF) culture building, root cause analysis, and behavior based safety; including 24 years experience with stringent safety requirements of the North Sea regulatory agencies.