Biomedical Engineering Expert Witnesses in California

This expert in the biomechanics of the human spine earned his undergraduate degree from the University of Pennsylvania and his doctorate in biomedical engineering from Duke University, where he researched spinal trauma. In recognition of his scholarly contributions, the Orthopedic Trauma Association granted him the 'Best Paper' award for his work on spine trauma and the spine's response to loads. He has served as a reviewer for the both the 'Journal of Biomechanics' and 'Spine'. He has significant exposure to the clinical arena, having taught residents and fellows in orthopedic surgery at the Baylor College of Medicine and the Methodist Hospital in Houston, Texas. He currently applies his knowledge as a consultant.

This highly qualified engineering expert specializes in water treatment engineering, design, and operations. He is a certified water treatment and distribution operator. He belongs to a number of prestigious societies in the water treatment field and has authored more than 5 publications on the topic. This expert is currently a private water treatment industry consultant.

This expert is very well qualified the field of electrical engineering and power source design and qualification. He received his BS and ME in Biomedical Engineering from Worcester Polytechnic Institute. He is a member of the Board of Directors of the Power Sources Manufacturing Association and several branches of the Institute of Electrical and Electronic Engineers including IEEE Consultants Network and Chairs the San Francisco Bay Area IEEE Power Electronics Society. This expert specializes in analog/digital power and design as well as hardware failure analysis, manufacturing, and market analysis. He is currently a Principal at a power design consultancy that specializes in enterprise-level and consumer applications.

This highly qualified expert in biomechanics has over 20 years of professional experience in areas such as use of force, bulletproof vests, sports, and many more. She received her BS in nursing from Nazareth College, her MS in bioengineering from the University of Michigan and her MS in mechanical engineering from Wayne State University. This expert then went on to complete her PhD in biomedical engineering from Wayne State University. She is a member of various professional organizations, including the American Institute for Medical and Biological Engineering, the American Society of Mechanical Engineering, and the American Society of Engineering Education. She has published over 30 journal articles, three books, and has given nearly 60 presentations on topics in biomechanical and biomedical engineering. Formerly, she has held roles as an associate professor and full-time faculty member in biomedical engineering at Wayne State University. Additionally, she was a television producer for ESPN. Currently, this expert serves as a professor of biomechanics at a prominent CA medical school.

This highly qualified expert has over 15 years of experience in the field of bioengineering. He earned his BS in electrical engineering, two MS degrees - one in mechanical engineering and the other in electrical engineering - and his PhD in bioengineering from Georgia Institute of Technology. He is certified in deep learning with MATLAB and as a Level 1 chartered market technician and DTR international securities exchange trader. He is active in his field as a member of the IEEE Signal Processing Society, the IEEE Communications Society, and the Biomedical Engineering Society. He is also highly involved in research, having received multiple grants for his research and authored numerous publications. This expert currently holds 21 patents. He has held a number of distinguished positions throughout his career serving as the chief technology officer for 4-D Imaging, the chief risk officer of Carlyle Blue Wave Partners, and the chief science officer of Heart in Your Hand LLC and Endovantage LLC. Currently, this expert serves as an associate professor of engineering at a well-known university in Arizona, an associate professor of radiology at a medical university in Arizona, and the lead of camera software for a leading technology company.

This expert has over 30 years of experience in medical device development, specifically cardiovascular devices. He earned his BS in chemical engineering from Arizona State University and is a member of the International Society for Endovascular Specialists. This expert has a high level of clinical expertise for surgical, vascular and endovascular devices and procedures and is well versed in implantable device failure investigation and evaluation. He previously served as the president of Arizona Heart Innovative Technologies, LLC and as the vice president of research and development for Direct Flow Medical. He is currently the CEO of a medical device company in California that develops products to improve the quality of life for those with spinal cord injuries and disease.

This highly qualified expert has 50 years of experience in the field of engineering. He earned his BS in electrical engineering from Rutgers University and has completed a multitude of professional development courses and seminars over the course of his career. This expert is a licensed professional engineer in 5 states and is a certified diver. He is active in his field as a member of numerous organizations, including the National Society of Professional Engineers, the International Association of Forensic Sciences, and the Institute of Electrical and Electronic Engineers. He has also previously served as the president of the National Academy of Forensic Engineers. This expert has previously served as a field service engineer for Westinghouse Electric Corporation, electrical project manager for American Biltrite, senior electrical design engineer for Air Products and Chemicals, and consulting engineer for Paul Zamrowski Associates. Currently, he serves as a consulting electrical engineer for an independent engineering consultancy, with experience investigating the causes of electrical malfunctions, failures, or injury in cases of fires, lightning strikes and power surges, electrical shocks and electrocution, shipping damage, and accident reconstruction.

This expert in material sciences and electrochemistry received his BA in bio-engineering from the University of Pittsburgh before studying medical device fabrication science and then obtaining his PhD in physics at the University of Melbourne. He has experience with medical devices such as neural stimulators, neural recorders, and chemical sensors. This expert has two approved patents and two pending patents relating to materials used for medical devices and has published 27 articles in his field. Formerly, he served as a Fulbright research fellow at the Center for Eye Research Australia, a medical devices scientist at the University of Melbourne, and an NIH postdoctoral research fellow at the University of Pennsylvania. Currently, this expert is a senior scientist at a medical device company in California. He is also a co-founder and the CTO of a medical device company that specializes in developing bio-stable materials for neuro-interface devices.

This highly-qualified expert has over 20 years of experience in electrical and electronics engineering, rail transit systems design, construction, project management, light rail vehicle, and field wayside maintenance areas. He earned his BS in electrical and electronics engineering from California State University at Sacramento and his MBA in strategic leadership from Amberton University. He is licensed as a registered professional engineer in California. He formerly served as a technologist for Bechtel Power Corporation, a stop and zones technician and acting administrator for Orange County Transportation Authority, a project engineer for DCM Industries and Balfour Beatty Rail Systems. He also served as the associate systems design engineer for the Santa Clara Valley Transportation Authority, working with the Bay Area Rapid Transit (BART) team on the Silicon Valley Rapid Transit (SVRT) BART Extension Project. Currently, this expert is a senior systems engineer of rail operations for a local transportation authority in California.

This highly-qualified expert has over 40 years of experience in electrical engineering, with his work focusing on high voltage electric power transmission, distribution, and substation design, construction, operations & maintenance, control centers, and in particular electrical safety. He is also exceptionally familiar with industrial, commercial, and residential electrical systems, including the vast array of industry standards, codes, and best practice applications. He received his BS in electrical engineering from California State University before earning his MS in electrical engineering from the University of Nevada. A licensed professional engineer in the state of California, this expert is also certified by the North American Electric Reliability Corporation as a reliability coordinator and is licensed by the FCC in general radiotelephone, advanced class amateur radio, and as a global maritime distress safety system operator and maintainer. He is active in his field as an author of multiple textbooks and publications on the subject of electric power and is a member of several professional organizations, including the Institute of Electrical and Electronics Engineers and the National Association of Radio and Telecommunications Engineers. He worked for NV Energy for 15 years, as a telecommunications operations supervisor, a relay protection operations supervisor, a senior distribution engineer, and a senior substation design engineer. For the past 27 years, this expert has served as an electrical engineering consultant for an electric power engineering and safety consulting firm based in California.

This highly qualified expert specializes in engineering and regulatory affairs for medical device commercialization. She earned a BS in mathematics from Oregon State University and a MS in Medical Device and Diagnostic Engineering from the University of Southern California. This expert currently owns and operates her own medical device company where she prepares and submits FDA regulatory services 510k applications.

This expert has over 40 years of field experience as a plumber and HVAC contractor. He has installed, managed, and consulted for various projects. He is familiar with construction defects, claims, personal injury, costs, and product liability. He currently serves as Principal for a consulting firm dealing with plumbing, heating, HVAC, and Asbestos exposure mechanical systems.