Design Engineer Expert Witnesses

This highly qualified expert has a decade of experience in mechanical engineering. He specializes in mechanical design, scale model testing, heat transfer, equipment packaging, CFD analysis, and process/design FMEA. He obtained both his BS and MS in mechanical engineering at the Worcester Polytechnic Institute, before beginning his career in the field. Today, he is a licensed professional engineer in Connecticut and Maine. This expert previously served as a mechanical engineer at Depuy Orthopedics, as a boiler design engineer at Babcock Power Inc., and as a project engineer at Apex Engineering. He is currently an equipment engineer at a global fuel cell power company in Connecticut.

This highly-qualified laryngology expert has experience with voice and airway disorders, laryngeal and airway trauma, difficult airways, and vocal fold paralysis. She received her BSE in mechanical engineering from the Pratt School of Engineering at Duke University and her MSE in mechanical engineering from the University of Michigan before earning her MD from Wayne State University. She subsequently completed her residency in otolaryngology with a focus in head and neck surgery at Henry Ford Health System and her fellowship in voice and airway surgery at the Cleveland Clinic Foundation. This expert is board-certified in otolaryngology and is active in her field as a member of the American Academy of Otolaryngology-Head and Neck Surgery, the International Association of Phonosurgeons, and the Triological Society. Formerly, she served as a global product development engineer at General Motors Corporation, an assistant professor of immunology & microbiology at Wayne State University School of Medicine, an assistant professor of otolaryngology at Oakland School of Medicine, and a locum tenens otolaryngologist at ProMedica Memorial Hospital. Currently, this expert serves as a staff laryngologist at a health network, as well as an assistant professor of surgery in otolaryngology at a university, both in Pennsylvania.

This highly-qualified expert has over 25 years of experience in the areas of electronic materials, electronic components (capacitors, resistors, inductors, batteries, antennae, etc.) and assemblies (surface mount), intellectual property, product development, process optimization, market studies, and grants. He earned his MS in materials science and engineering from the University of Florida and his MBA from Webster University. He went on to complete his PhD in materials science and engineering at the University of Florida. Formerly, he served in many different research and engineering roles at firms relating to electronic materials. This expert also served as the director of research and development in electronic materials at Ferro Corporation, as director of advanced technology at KEMET Electronics, and as chief economic development officer at Health Sciences South Carolina. Currently, he is president of the consulting of an electronic materials firm in South Carolina.

This highly-qualified expert has over 20 years of experience in electrical and electronics engineering, rail transit systems design, construction, project management, light rail vehicle, and field wayside maintenance areas. He earned his BS in electrical and electronics engineering from California State University at Sacramento and his MBA in strategic leadership from Amberton University. He is licensed as a registered professional engineer in California. He formerly served as a technologist for Bechtel Power Corporation, a stop and zones technician and acting administrator for Orange County Transportation Authority, a project engineer for DCM Industries and Balfour Beatty Rail Systems. He also served as the associate systems design engineer for the Santa Clara Valley Transportation Authority, working with the Bay Area Rapid Transit (BART) team on the Silicon Valley Rapid Transit (SVRT) BART Extension Project. Currently, this expert is a senior systems engineer of rail operations for a local transportation authority in California.

This published expert has over 20 years of experience in the field of chemical engineering, with his work specifically focused on thermal imaging. He earned his BS in physiology from McGill University and his MS in Chemical Engineering at McMaster University. He has extensive teaching experience as a visiting lecturer at Golden Gate University and Sofia University. He also formerly worked as a preclinical and clinical consultant at Oroscience PLC, where he designed and executed experiments to define the safety and efficacy of new electrosurgical products. Currently, he owns an engineering consulting business that assists many biomedical device companies in product development and manufacturing optimization.

This expert has 40 years of experience in mechanical engineering, specializing in engineering simulation, heat transfer, and fluid dynamics. After earning her BS in math and physics from Heidelberg College, she earned her BS in engineering physics and MS in mechanical engineering from the University of Toledo. She also obtained her PhD in mechanical and aerospace engineering at the University of Virginia before beginning a highly successful career in mechanical engineering research and engineering software. She is active in her field as a member of numerous professional organizations and as the author of over 80 journal articles, technical reports, web articles, and seminar presentations. Some of her former positions include serving as the president of Blue Ridge Numerics, Inc., as the vice president of product development for Compuflo, Inc., and as a professor of mechanical and aerospace engineering at the University of Virginia. In these roles, she conducted extensive research and directed technical simulation software development for 3 companies. Currently, this expert is a senior architect for a technology company.

This highly qualified expert has over 20 years of experience in computer security, digital forensics, and digital currency, such as Bitcoin and Ethereum. He earned his BS in computer science and his MS in data communications networks and distributed systems from the University College London. In addition, this expert holds 3 patents and has published 7 books involving digital currency and bitcoin. He has held several roles throughout his career including being an IT manager at Odey Asset Management, managing director for Phaia Limited, and security practice lead for Greenwich Technology Partners. He also held several executive roles including director of security practice at ThruPoint Inc, the chief intelligence officer at Nemertes Research, and the chief security officer at Blockchain.info. He has also founded companies such as Athena Systems Design Limited and the Managed Business Network. Currently, this expert is a teaching fellow of the digital currencies masters program at a university in Cyprus and is the founder and CEO at an educational platform of bitcoin and blockchains based in California.

This highly-qualified expert has over 40 years of experience in electrical engineering, with his work focusing on high voltage electric power transmission, distribution, and substation design, construction, operations & maintenance, control centers, and in particular electrical safety. He is also exceptionally familiar with industrial, commercial, and residential electrical systems, including the vast array of industry standards, codes, and best practice applications. He received his BS in electrical engineering from California State University before earning his MS in electrical engineering from the University of Nevada. A licensed professional engineer in the state of California, this expert is also certified by the North American Electric Reliability Corporation as a reliability coordinator and is licensed by the FCC in general radiotelephone, advanced class amateur radio, and as a global maritime distress safety system operator and maintainer. He is active in his field as an author of multiple textbooks and publications on the subject of electric power and is a member of several professional organizations, including the Institute of Electrical and Electronics Engineers and the National Association of Radio and Telecommunications Engineers. He worked for NV Energy for 15 years, as a telecommunications operations supervisor, a relay protection operations supervisor, a senior distribution engineer, and a senior substation design engineer. For the past 27 years, this expert has served as an electrical engineering consultant for an electric power engineering and safety consulting firm based in California.

This expert has over 30 years of experience in the roofing and building enclosure industry. He earned his AAS in civil engineering technology from Hawkeye Institute of Technology before earning his BA in computer science and business administration from Coe College. He is licensed as a professional engineer in 4 states and is a registered roof consultant and exterior wall consultant. He is active in his field as a member of ASTM International, the Roof Consultants Institute, and the Building Enclosure Council, and as an author of several articles on roofing and building codes. He formerly served as a design engineer and project manager for Shive-Hattery Engineers and Architects, the office manager for VJ Engineer, and a project engineer with Brown Engineering, where he was responsible for building envelope and roofing consulting projects. Currently, this expert serves as a project engineer for facilities at a roofing engineering consulting firm based in Iowa.

This expert has over 30 years of experience in the medical device industry, with broad expertise in cardiovascular and endovascular fields with a focus on percutaneous catheters, heart assist devices, brain and aortic aneurysm treatment, and vascular closure products. He earned his MS in mechanical engineering at Moscow State Technical University and worked as the lead engineer at the Scientific Institute for Transplantology and Artificial Organs before moving to the United States. He is a registered patent agent through the US Patent and Trademark Office and is a member of the Association of University Technology Managers, the International Society for Rotary Blood Pumps, and the American Society for Artificial Internal Organs. He formerly served as the scientific director and vice president of technology at Datascope Corp. before he served as the CTO of Cerus Endovascular. This expert is currently the principal of a patent consulting company, the founder of a medical technology development company, and the vice president of product development for a medical device start-up in New Jersey.

This expert has over 40 years of experience in engineering and construction, with more than 35 years of experience in the field of natural gas and propane incidents, pipeline construction and operation, and water and sewer systems. He is currently the president of a reputable forensic engineering and failure analysis company. His primary areas of expertise include residential, commercial and industrial natural gas and LP gas fires, explosions and carbon monoxide incidents. He has experience with gas processing plants, regulator stations, compressor stations, and other facilities and has conducted numerous investigations and has testified about issues at these types of facilities. He has investigated many carbon monoxide incidents and has conducted major carbon monoxide testing programs throughout the country. He has a great deal of experience and has testified on numerous occasions regarding carbon monoxide issues.

This expert received his BS and MS from the Mechanical Engineering Department at MIT and is a licensed engineer in NY and CT. He currently works as a forensic/consulting engineer at a private engineering firm. His investigative and analytic experience includes motor vehicle accident reconstruction, biomechanics, product design and safety, and computer simulation and animation. He has also served as a member of the ANSI/NGCMA Z130.1 engineering specifications committee.

This highly qualified engineer has over 15 years of consumer products engineering experience. He has held many prestigious positions at such companies as Electrolux and General Electric and currently owns and is a lead engineer of a highly successful electronics design firm.

This expert has over 15 years of experience in the medical device industry as a quality engineer, quality systems and complaint investigator with emphasis on cardiovascular devices. A Certified Quality Engineer and Biomedical Auditor, his expertise includes managing quality systems, design and development of new product lines, product risk management and complaint investigations. He currently serves as Principal quality management systems and business Consultant for an independent consulting firm in both medical device and other industries. His understanding of medical device firm operations and intimate familiarity with medical device requirements in both the US and other geographies make him an ideal expert to provide advice in determining both legal and regulatory requirements for medical device firms as well as users (clinicians).

This expert has been working with fire extinguishing systems for 40 years. He is a Registered Professional Engineer and holds membership in both the Society of Fire Protection Engineers and the National Fire Protection Association. He spent 15 years working for Ansul/Wormald, starting as a Development Engineer of fire suppression products and working his way up through the roles of Manufacturing Engineer, Operations Management, Applications Engineer, Product Development Manager, and eventually to Vice President of Wormald Fire Systems. After serving in executive positions with Fenwal Safety Systems and Forney Corporation, he became President of Kidde Technologies, a position he held for over a decade. Currently, this expert is the Principal of his own fire systems consultancy, wherein he utilizes his technical and market experience in the fire suppression industry to aid businesses, manufacturers, and private equity firms on a variety of projects and initiatives related to fire protection systems.

This expert has extensive experience in fuel system design, storage, and dispensing systems. He has spent many years as a gas station expert, constructing gasoline service stations for major oil companies and public agencies. He has been involved with numerous societies in the gas station safety/construction industry, and is certified to handle all gas station related materials. Currently, this expert consults on fuel system installation, design, and safety at his own firm.

This highly qualified expert holds both a Bachelors and a Masters degree in Mechanical Engineering from the University of South Carolina where he was summa cum laude. He is a Certified Plant Engineer and a Certified Training Instructor for Aerial Work Platforms and Rough-Terrain Forklifts. He was enlisted in the United States Navy for 12 years where he was responsible for operating, repairing, and managing nuclear power plants and personnel. He has also served as Director of Engineering, Chief Engineer and has also held the position of Senior Design engineer responsible for manufacturing and new product development. Through his work experiences, he gained an extensive background in welding and fabrication of products and he manages his current company's product testing lab, specifically treestands and associated equipment. He is a member of the National Society of Professional Engineers, American Society of Mechanical Engineers, American Society of Civil Engineers and a Certified Fire Protection Specialist. He has also earned numerous Navy and Marine Corps medals.

This expert has been working with floating drilling and production vessels for over 40 years. He completed his undergraduate studies in Civil Engineering in Hong Kong prior to earning an M.S. and Ph.D. in Structural Engineering from the University of Houston. He began his career as a Design Engineer and Computer Specialist with The Offshore Company, where for 6 years he performed analyses for the design and operation of floating drilling vessels, including conducting mooring and riser analyses. He then joined Exxon's upstream research affiliate Exxon Production Research Company, where he worked for 22 years. As a Senior Research Specialist in their Offshore Division, this expert conducted research in the areas of mooring and risers and provided technical support to Exxon's offshore operations worldwide, while he also taught internal training courses on mooring and riser systems. Furthermore he has been teaching mooring short courses at the University of Texas and in Singapore. He was the recipient of awards and honors such as the American Petroleum Institute's Citation for Distinguished Meritorious Service, DeepStar's Outstanding Contribution Award, and Who's Who in the South and Southwest. He was the chairman of API Mooring Resources Group for 24 years (1982-2006) responsible for the development of API RP 2SK (mooring design), API RP 2I (mooring inspection), and API RP 2SM (fiber rope mooring). He also played a key role in the development of the International Organization for Standardization (ISO) mooring codes, which required a thorough understanding of both American and European mooring codes. Currently, this expert is a Technical Advisor for a private offshore industry consulting group, as well as an independent consultant to the offshore industry. Some of his activities in these roles have included writing mooring standards for Chevron, revising the American Bureau of Shipping Guidance Notes on Application of Fiber Rope for Offshore Mooring, and directing a joint industry project on Arctic mooring systems. He has served as a mooring expert in 7 litigation processes concerning mooring failures.

This highly qualified expert received his Ph.D in Electrical and Computer Engineering from the University of Illinois at Urbana-Champaign. Prior to that, he received his M.S. degree in Computer Science from the University of Alberta and B.S. degree in Electrical Engineering from the Indian Institute of Science. This expert has 27 years of academic teaching experience as a Professor in the Department of Electrical Engineering and Computer Science at the highly regarded University of Michigan. In addition to his academic teaching experience, he has 6 years Industrial R&D experience as Member of Technical Staff at AT&T Bell Laboratories and as Senior R&D Engineer at Bharat Electronics Ltd. He also has held the prestigious position as Program Director of Emerging Models and Technologies Programs and Program Director in Electrical, Communications and Cyber Systems Division at the National Science Foundation. This expert is the inventor for 5 published patents and has published over 260 technical papers and 4 books on various aspects of Very-large-scale integration (VLSI) technology and systems. His inventions in testable DRAM circuits, in-line accelerated testing procedures for high-density RAM chips, and testing of embedded ROM and SRAM through JEDEC boundary scan ports are widely used by memory and field-programmable gate array (FPGA) manufacturers. His research in biology-inspired VLSI layout synthesis, self-healing VLSI design and self-repairable memory compilers has made commercial impact. His research group has developed a Quantum SPICE simulator to design several innovative quantum tunneling based circuits that were fabricated by many U.S. companies. He has been awarded many honors including Digital's Incentives for Excellence Award, BF Goodrich National Collegiate Invention Award, and the DARPA Research Excellence Award. This expert is an American Association for the Advance of Science Fellow and an Institute of Electrical and Electronics Engineers Fellow for his distinguished contributions to the field of VLSI. He has served as a Consultant for several semiconductor companies as well as an Adviser and Expert Witness in 8 lawsuits involving DRAM, SRAM, Flash, and FPGA. Currently, he is a Tenured Professor, Department of Electrical Engineering and Computer Science at a major university where he continues to make active contributions to the field of semiconductor memory systems, quantum tunneling circuits and CAD Tools, and Reliable VLSI Systems Design.

This expert has been involved in the LED industry since 2005. He managed the patent portfolio for Color Kinetics and enjoyed considerable success in building out a functional licensing program for the world-wide LED industry. He went on to be the IP Strategist and GM of Custom Solutions for Lighting Science Group. Since 2010 he has worked as an independent advisor to a wide range of LED companies in North America, Europe, and Asia, focusing on IP strategy, product development, new market entry, fund-raising, and related activities. He is a former instructor in IP strategy for the Licensing Executive Society. He currently serves on technical advisory boards and boards of directors for LED lighting companies in the US and Europe, and remains active in assisting both young and established companies in the pursuit of their goals for growth.'