Medical Devices Expert Witnesses in Oregon

This expert works as the vice president of engineering for a large fitness corporation. He has worked in the industry for over over thirty years, is familiar with industry trends, and is familiar with the history of numerous fitness products. He holds multiple patents for highly used fitness equipment and has published multiple articles on product safety/warning labels. He is chairman of the committee responsible for fitness industry standards and has authored or contributed to all standards published to date. He has worked on product liability cases for 34 years assisting both defense and plaintiffs attorneys.

This expert has been working as a mechanical engineer and testifying expert witness for over 30 years. He holds both an M.S. and Ph.D. in Mechanical Engineering from Stanford University and a BES from Georgia Tech. He is a Fellow of the American Society of Mechanical Engineers (ASME), a Senior Member of the Institute of Electrical and Electronics Engineers (IEEE), and a Member of SAE and ASM. This expert is a licensed Professional Mechanical Engineer (PE), providing expertise across a wide range of engineering topics and fields. He has deep experience in medical devices including cardiovascular, orthopedic, and spinal applications and applications of nitinol shape memory materials. He has experience as an Expert Witness, has testified in trial and deposition, and authored expert reports and IPR declarations. He works in patents and product failure analysis and forensics. He was previously Faculty in the Department of Mechanical Engineering at Santa Clara University as well as a Visiting Associate Professor in the Department of Mechanical Engineering at Stanford University.

This expert in the biomechanics of the human spine earned his undergraduate degree from the University of Pennsylvania and his doctorate in biomedical engineering from Duke University, where he researched spinal trauma. In recognition of his scholarly contributions, the Orthopedic Trauma Association granted him the 'Best Paper' award for his work on spine trauma and the spine's response to loads. He has served as a reviewer for the both the 'Journal of Biomechanics' and 'Spine'. He has significant exposure to the clinical arena, having taught residents and fellows in orthopedic surgery at the Baylor College of Medicine and the Methodist Hospital in Houston, Texas. He currently applies his knowledge as a consultant.

This expert is very well qualified the field of electrical engineering and power source design and qualification. He received his BS and ME in Biomedical Engineering from Worcester Polytechnic Institute. He is a member of the Board of Directors of the Power Sources Manufacturing Association and several branches of the Institute of Electrical and Electronic Engineers including IEEE Consultants Network and Chairs the San Francisco Bay Area IEEE Power Electronics Society. This expert specializes in analog/digital power and design as well as hardware failure analysis, manufacturing, and market analysis. He is currently a Principal at a power design consultancy that specializes in enterprise-level and consumer applications.

This highly qualified expert in biomechanics has over 20 years of professional experience in areas such as use of force, bulletproof vests, sports, and many more. She received her BS in nursing from Nazareth College, her MS in bioengineering from the University of Michigan and her MS in mechanical engineering from Wayne State University. This expert then went on to complete her PhD in biomedical engineering from Wayne State University. She is a member of various professional organizations, including the American Institute for Medical and Biological Engineering, the American Society of Mechanical Engineering, and the American Society of Engineering Education. She has published over 30 journal articles, three books, and has given nearly 60 presentations on topics in biomechanical and biomedical engineering. Formerly, she has held roles as an associate professor and full-time faculty member in biomedical engineering at Wayne State University. Additionally, she was a television producer for ESPN. Currently, this expert serves as a professor of biomechanics at a prominent CA medical school.

This highly qualified expert has over 15 years of experience in the field of bioengineering. He earned his BS in electrical engineering, two MS degrees - one in mechanical engineering and the other in electrical engineering - and his PhD in bioengineering from Georgia Institute of Technology. He is certified in deep learning with MATLAB and as a Level 1 chartered market technician and DTR international securities exchange trader. He is active in his field as a member of the IEEE Signal Processing Society, the IEEE Communications Society, and the Biomedical Engineering Society. He is also highly involved in research, having received multiple grants for his research and authored numerous publications. This expert currently holds 21 patents. He has held a number of distinguished positions throughout his career serving as the chief technology officer for 4-D Imaging, the chief risk officer of Carlyle Blue Wave Partners, and the chief science officer of Heart in Your Hand LLC and Endovantage LLC. Currently, this expert serves as an associate professor of engineering at a well-known university in Arizona, an associate professor of radiology at a medical university in Arizona, and the lead of camera software for a leading technology company.

This expert has over 30 years of experience in medical device development, specifically cardiovascular devices. He earned his BS in chemical engineering from Arizona State University and is a member of the International Society for Endovascular Specialists. This expert has a high level of clinical expertise for surgical, vascular and endovascular devices and procedures and is well versed in implantable device failure investigation and evaluation. He previously served as the president of Arizona Heart Innovative Technologies, LLC and as the vice president of research and development for Direct Flow Medical. He is currently the CEO of a medical device company in California that develops products to improve the quality of life for those with spinal cord injuries and disease.

This product design and liability expert has over 50 years of experience in mechanical engineering. He has devoted his entire career to the design, development, and commercialization of medical devices and similar consumer products, developing 5 patents along the way. He received his BS in mechanical engineering from California State Polytechnic College before obtaining his MBA from California State College. Formerly, he served as an engineer and department manager at California Injection Molding Co., a senior project engineer and the manufacturing engineer manager at McGaw Laboratories, the director of engineering at Hudson Oxygen Therapy Sales Co., and the president at Fallbrook Engineering Inc. Currently, he serves as the president of a consulting engineering services firm in Washington.

This Washington-based expert has over 20 years of experience in chemistry and medical device research, specializing in polymer synthesis, polymer characterization, analytical chemistry, medical device design and intellectual property management. He received his BES in chemistry and photographic sciences from St. Cloud State University before earning his PhD in polymer chemistry from the University of Southern California. He is active in his field as a member of the American Chemical Society, is a highly-published author on the topics of polymer chemistry and medical devices, and holds 65 patents that have enhanced the field of polymer chemistry. Previously, he has served as a polymer chemist and then a senior polymer chemist at Medtronic, an adjunct professor of polymer chemistry at the University of St. Thomas, and a senior scientist at DexCom Inc. He also formerly served as an associate professor and then a professor of chemistry, as well the assistant dean of the college of science and technology and the interim assistant vice president and dean of graduate studies at Bloomsburg University. Currently, he serves as the vice president of intellectual property at a technology research lab in WA.

This expert in material sciences and electrochemistry received his BA in bio-engineering from the University of Pittsburgh before studying medical device fabrication science and then obtaining his PhD in physics at the University of Melbourne. He has experience with medical devices such as neural stimulators, neural recorders, and chemical sensors. This expert has two approved patents and two pending patents relating to materials used for medical devices and has published 27 articles in his field. Formerly, he served as a Fulbright research fellow at the Center for Eye Research Australia, a medical devices scientist at the University of Melbourne, and an NIH postdoctoral research fellow at the University of Pennsylvania. Currently, this expert is a senior scientist at a medical device company in California. He is also a co-founder and the CTO of a medical device company that specializes in developing bio-stable materials for neuro-interface devices.

This expert has 25-plus years of Automotive Safety Research and Development, Accident Reconstruction, Concept Vehicle Design and Manufacture as a Scientist Engineer, Project Manager, Senior Project Engineer, Systems Engineer, (Design, Development, Manufacturing and Test Engineer). Qualified as a Motor Vehicle Accident Reconstruction and Bio-Mechanical Engineering Expert in Los Angeles, Orange, Riverside, Ventura, Kern, Alameda and San Bernardino Counties, Alaska, Iowa, Tennessee, Florida, Ohio, Idaho, Utah, Nevada, Arizona, Massachusetts and Texas. He has thirty-five years of Motor Vehicle Accident Reconstruction, Automobile and Motorcycle Product Defect, Forensic and Occupant Biomechanical Injury Analysis, Automotive Safety, Vehicle Design, Development, Manufacturing, Test Engineering and Patent Infringement analysis. This expert has extensive experience and knowledge of product defects in the following areas: Automobile, Truck, Motorcycle, Jet Ski, ATV, Snow Mobile, Golf Cart, Big Rig Truck cases: Involving airbags, seatbelts, seats, fuel system fires, transmission part-to-reverse, unintended acceleration, brakes, tires, axle failures, roof crush, side impact, roll propensity, vehicle handling dynamics, suspension and chassis, design and manufacturing defects.

This highly qualified expert specializes in engineering and regulatory affairs for medical device commercialization. She earned a BS in mathematics from Oregon State University and a MS in Medical Device and Diagnostic Engineering from the University of Southern California. This expert currently owns and operates her own medical device company where she prepares and submits FDA regulatory services 510k applications.