Lighting Expert Witnesses in New Mexico

This lighting expert earned his Ph.D. in Chemical Engineering from the University of Florida and has been granted 26 U.S. patents, many of which relate to lighting fixtures. From 2008 until 2011, he served as the Vice President of Research at the Lighting Science Group Corp, where he transitioned the company to a product-driven supplier of LED products and helped grow revenues from $3 million to $100 million. He later served as the Chief Engineer of the ETi Lighting Research Institute and the Vice President of Research and Development for ETi Solid State Lighting Inc. He has worked at every stage of LED technology, including raw materials, lighting fixtures, and standards development. The expert currently works as a technology and engineering consultant and also assists on legal matters, primarily patent infringement cases.

This expert in technical documentation and mechanical engineering has over 35 years of professional experience. He completed his AAS in electrical engineering and his BS in mechanical engineering from NEC and Texas Tech University. He is skilled in electrical, mechanical, hydraulic, HVAC power distribution, in addition to HTML SGML and other programs. Formerly, he has served as a technical writer at Allard, the director of content development at Zane Publishing, and a manager of technical publications at USDATA. Currently, this expert is a senior technical writer at a TX technical documentation firm.

This highly qualified expert has nearly 25 years of experience in electronic engineering. He received his BS in electrical engineering from the University of California Irvine before earning his PhD in electronics engineering and control systems at the University of Colorado. This expert is a licensed professional engineer. He is active in his field as a member of IEEE and currently holds 3 patents. He has formerly served as a principal engineer for ETO/ASTeX and NeoCore, as well as the chief architect for Xpriori and a researcher in the electrical and computer engineering department of Valdez International. Currently, this expert serves as the COO for an engineering consultancy in Colorado.

This highly qualified expert has 55 years of experience with semiconductors and over 15 years of experience with patents. He earned his BSEE from Rensselaer Polytechnic Institute with a focus on semiconductors. He completed advanced management courses through Raytheon and is a registered U.S. patent agent. This expert currently holds 4 patents and has published 4 technology books. For 20 years, he worked for a variety of companies in the technology industry in various positions. Most notably, he worked on military microelectronics for Martin-Marietta and Raytheon, was part of the adjunct faculty for Arizona State University, and specialized in semiconductors for Motorola. Currently, he is the president of a strategic technology consulting firm based in Colorado that he founded over 30 years ago.

This expert received his BS in electrical engineering from the University of Puerto Rico, graduating magna cum laude. He also earned a business marketing certificate from Collin Co Community College and completed the Bussmann consulting engineering training. He is a licensed professional engineer and has been a LEED accredited professional for over 10 years. He holds more than 20 years of experience in the design and construction of power distribution, lighting, fire alarms, and electrical safety issues. The projects he has worked on have involved city infrastructure, high and medium voltage substations, education facilities, and health care facilities. This expert currently is the senior electrical engineer of an electrical safety company in Texas.

This expert has 50 years of experience in the field of engineering and project management. He earned his BS in electrical engineering from Lamar University and previously served as a project manager at Foster Wheeler USA and ENGlobal Engineering. He also served as the Gulf Coast regional manager at Mustang Process & Industrial/PME and as a project director consultant at EuroPetro Consultants. He is currently an independent engineering consultant based in Texas.

This highly-qualified expert has 45 years of experience in the field of security and risk management. His areas of expertise include premises liability, nightclub security, security guards, apartment properties, retail loss prevention, negligent hiring/retention and cargo losses due to inadequate security. He earned his BA in sociology with an emphasis in criminology from Louisiana State University. This expert is active in his field as a member of the American Society for Industrial Security, as an author of several published security articles, and a speaker at various security conferences. He began his career with Southern Research Company, serving as a security guard supervisor and as part of the investigations division working on theft and narcotics investigation. He then went on to serve as a patrol officer with the Dallas Police Department and the single unit and area loss prevention manager for Sears. For 12 years, he worked with Eckerd Corporation, serving first as a regional loss prevention manager before becoming the director of loss prevention operations. For nearly 20 years, this expert has served as the president of his risk analysis and security management consulting firm in Texas.

This highly qualified Electrical Engineer and Optical Imaging expert earned a Ph.D in Optical Sciences from the University of Arizona. He is a Fellow of both the International Society of Optical Engineering and the Optical Society of America. He has won many awards throughout his career in recognition of his academic and research contributions. This expert has published over 75 peer-reviewed journal articles and has authored five textbooks. He is an authority in his field and is frequently invited to lecture as a guest speaker. He is the former President of an international society of optical engineering.

This expert is a registered professional engineer and certified journeyman electrician, belonging to such societies as the Association of Electrical Inspectors and the Institute of Electrical and Electronics Engineers. He has served as an electrician and electrical engineer on various projects over his 35+ year career, and is currently the president of a Forensic engineering consulting firm including Electrical, Mechanical, and Structural Engineers.

This highly experienced biomedical engineer has directed comprehensive hospital-based biomedical engineering department at the largest medical center in the country, taught at both medical and technical post-secondary institutions, including the Baylor College of Medicine, West Virginia University, and a prominent Mexican university. He earned his undergraduate and graduate degrees in electrical engineering from West Virginia University. He is a licensed Professional Engineer and certified as a Clinical Engineer. He is member of technical standards writing bodies, and is widely published in his field and his expertise is frequently sought by hospitals, manufacturers, and litigators. He received numerous professional awards including the FDA Commissioner, Special Citation for protecting the public safety.

This expert is a world renowned Biomedical Engineer specializing in prosthetics. He received a BA in mathematics and a BAI in microelectronics and electrical engineering from Trinity College Dublin, Ireland, in 1983. After working as a control engineer in England, he moved to the USA and obtained his MS and PhD degrees in biomedical engineering from Northwestern University in Evanston, IL. He has extensive experience working with lower and upper limb prosthetics research. His recent research is focused on the development an artificial hand replacement capable of true dexterous manipulation for use by persons with upper-limb loss. He covers all aspects of the problem ranging from neural control and sensing, mechatronic design and development, novel actuator technologies, and clinical deployment of these systems. He is currently the Director of the Biomechatronics Development Laboratory at a university in CO. He is also a Research Healthcare Scientist for a VA Health Care System, and holds Research Associate Professor appointments in the Departments of Bioengineering and Physical Medicine & Rehabilitation.

This expert holds a bachelor degree in Environmental Design and a masters in Architecture from the University of Colorado, and is a member of the American Institute of Architects. As a forensic architect, he performs standard of care analysis in design and construction projects, with special emphasis on multi-family residential projects; performs cause and origin analysis of building system installations and failures, including roofing systems, window and door systems, exterior wall cladding systems, waterproofing, and foundation systems, with a specialization in fire-resistive assemblies and active fire-protection systems; performs premises liability analysis including slip/trip and fall, and maintenance procedure analysis, with an emphasis on accessibility code compliance; and performs damage assessments on existing facilities related to storms, accidents, fire, and natural disasters.

This licensed engineer earned his BS in Electrical Engineering from the University of Missouri and is a certified fire & explosion investigator. He has held a number of electrical engineering and products safety positions throughout his career, specializing in EE, product development, technical management, design verification, advanced troubleshooting, and failure analysis. This expert is currently a Senior Professional Engineer at a private Engineering consultancy.

This expert is an independent security consultant with international experience in crime prevention, Crime Prevention Through Environmental Design (CPTED), security management and premises liability litigation support. Formerly the Principal Consultant and Executive Vice President at IPC International Corporation, a security firm, he entered the field as a Detective with the Baltimore Police Department. He holds a Bachelor's degree from the American University and completed graduate level work at several institutions, including the Advanced CPTED curriculum at the National Crime Prevention Institute. His practice has included urban environments, race tracks, traditional and mixed-use shopping centers, parks, residential, and commercial facilities; he has instructed in CPTED and crime prevention for police departments, private security entities, corporate management and facility staff at all levels, and supported plaintiff and defense litigation related to premises liability, and security adequacy.

This expert specializes in electrical engineering issues, and has performed numerous investigations into fires caused/allegedly caused by electrical issues. His experience includes evaluation of electronics products and their failure modes to determine whether they adhered to relevant safety standards, including those established by Underwriters Laboratories and the Canadian Standards Association. He has also evaluated products and components for structural wiring compliance with the National Electric Code. His projects have included a wide array of products and components, including but not limited to electronics, appliances, HVAC/R, residential and commercial wiring, and battery failure analysis, with an emphasis on lithium ion battery chemistry. He is a licensed Professional Engineer in multiple states, and holds a Certified Fire and Explosion Investigator certification.

This well credentialed expert is a Professor and Distinguished Chair in Computer Science for a public university in Texas. He is also Professor Emeritus in the Department of Electrical and Computer Engineering at Cornell University, where he taught and performed research for 20 years. He has about 30 years of professional experience in communication networks, wireless communication, and wireless and mobile networks. The expert earned his Ph.D. in Electrical and Computer Engineering from Stanford University; he also has a B.S. in Electrical Engineering from Technion and an M.S. in the same field from Tel-Aviv University. He has headed the Wireless Networks Lab, an internationally recognized research group at Cornell. The expert has over 200 journal and conference publications. He has been granted 18 patents with 2 additional patents pending. He is a Fellow of the Institute of Electrical and Electronics Engineers (IEEE) and a member of the IEEE's Communications Society, as well as a member of the Association for Computing Machinery (ACM).