Engineering Expert Witnesses in West Virginia

This expert earned his PhD in mechanical engineering/aeronautical sciences from the University of California Berkeley and has authored numerous publications in the mechanical engineering and biomedical engineering space. He is a member of the Society of Automotive Engineers and has held numerous professorships relating to multiple facets of engineering. He is the former co-director of the DOT program for motor vehicle trauma at the UCLA schools of engineering and medicine. Currently, this expert is a senior forensic consultant focusing on biomechanics and biomedical engineering.

This expert has published extensively in magazines, in-house journals, and textbooks. He is a participating member of numerous societies. He has over 40 years personal experience in management, consulting and expert services in the fields of design, manufacturing, testing of hydraulic, pneumatic and electro-mechanical lifting and load bearing machines, equipment and devices: industry experience including automotive, construction, industrial, material handling, warehousing and transportation: forensic engineering including product liability, accident investigation, reconstruction and expert testimony: incidents involving industrial trucks, aerial work platforms, forklifts, telehandlers, tuggers, pallet jacks, automatic storage and retrieval systems, dock boards, dock levelers, trailer restraints, trailer jacks, racks, conveyors, overhead bridge cranes, trucks, shop cranes, scissors lifts, shop cranes, automatic doors and lift gates: heavy equipment involving telehandlers, powered industrial trucks, automatic storage and retrieval systems, gantry cranes, truck cranes, tower cranes, cranes with hydraulic booms, cranes with lattice booms, grapple and magnet equipped excavators, and side boom cranes: conformity issues involving environmental, health and safety, warnings, instructions, training conformity with recognized standards, codes, industry custom and practice and government regulations.

This audio device expert began his career as a professional musician, studying at the Boston Conservatory of Music. He thereafter earned a BS in Electrical Engineering from Northeastern University and later pursued a doctorate in the field at Lehigh University. He is a licensed Professional Engineer and member of the IEEE, National Academy of Forensic Engineers (NAFE) and Audio Engineering Society (AES). As the author of industry patents and an active member of the American Bar Association Section Intellectual Property Law, he has a significant interest in intellectual property disputes.

This expert is a nationally renown expert in automotive engineering and currently is Professor of Mechanical Engineering at a top ten automotive design and engineering school, where he also holds the position of Director of Center for Vehicle Systems and Safety and the Railway Technologies Laboratory. This expert is the founding director of the Virginia Institute for Performance Engineering and Research and the Advanced Vehicle Dynamics Laboratory. He has authored more than 200 technical publications, and has made more than one hundred technical presentations in topics related to advanced technologies for ground vehicles. He holds seven U.S. and international patents, and has edited three technical volumes. He is currently Associate Editor of AIAA Journal and the journal of Shock Vibration, and has served as Associate Editor for ASME Journal of Vibration and Acoustics. This expert is a Fellow of American Society of Mechanical Engineers and a member of the Society for Automotive Engineers. He earned his PhD in Mechanical Engineering at State University of New York at Buffalo.

This highly qualified expert has 25+ years of experience in Engineering and has specifically focused on investigations and forensics for the last 15+ years. He earned his B.S. and M.S. in Mechanical Engineering from Ohio State University, and he has published over 35 papers and reviews and is a patent owner of 2 products. He belongs to the American Society of Heating, Refrigeration, and Air Conditioning Engineers, the National Safety Council, and the National Council of Examiners for Engineering & Surveying to name a few. While managing the Mechanical Department at Matrix Technologies, this expert prepared detailed engineering packages and programs for refrigerators and HVAC installations. He also served as the Chief Engineer at Thermo Mechanical Systems Co, where he assisted in the design of refrigeration and heating systems.

This expert is a hands-on� shop floor experienced Metallurgist, Quality Engineer/Manager, and QA/QC Inspector with expertise in aluminum, steel, titanium, and specialty metals mill operations, castings, forgings, extrusions, stampings, metal injection molded (MIM) parts, API Spec 5L Steel Line Pipe, Casing, Drill Pipe, and OCTG. Consulting engineer, Technical Advisor, Senior Supplier Quality Engineer (SQE), and Vendor Surveillance Source Inspector for major clients in various industries such a transportation and technology.

From 2004 to 2012, this expert dedicated his career to the development of lighting controls and motorized window shades and blinds. Having earned a Bachelor's degree in mechanical engineering from Lafayette College, he holds 8 US patents for the design of mechanized light control systems. His career has been centered around new product development. He has experience across several additional industries, including, surgical implants and instruments, mechanical piping, and industrial hose products, both as an engineer and product development team leader.

This expert has 40+ years of experience in drinking water supply, treatment and distribution systems. From 1994 to 2013, he served as the director of one of the largest drinking water utilities in Virginia, supplying water to 400,000 residents. A civil and environmental engineer by training, he has maintained a particular focus on water treatment facilities, water supply systems, water distribution technologies, and water utility operations over the course of his career. He has directed raw water source selection studies, water distribution system analyses, water quality studies, rate studies, corrosion control investigations, treatment plant rehabilitation projects, and construction supervision of water treatment plants, pipelines, and other water supply projects. He was named Chairman of an EPA council for drinking water, and has testified before Congress on three occasions on water quality and chemical security issues.

This certified Construction Site Safety Technician and Construction OSHA Outreach Trainer has led a 23+ year career in construction safety. He previously served as the Deputy Director of Safety at Hitt Contracting and now serves as the Director of Construction Management Services at a firm in close collaboration with the US Army Corps of Engineers. He earned his Bachelor's degree in Civil Engineering from Villanova University and served in the US Marine Corps for two decades, retiring at the rank of Major.

This biomedical and biomechanical expert spent over 15 years as a Professor at Johns Hopkins University and over 20 years as a member of their Applied Physics Laboratory. He has worked in biomedical implant analysis and design, materials biomechanics, and laminated composite analysis and design. He earned a B.S and M.S. in Mechanical Engineering from the University of Michigan, as well as a Ph.D. in the same field from Rensselaer Polytechnic Institute. The expert was named a Fellow in the American Society of Mechanical Engineers in 2010 and was selected as the Specialty Chief Editor of the Frontiers online journal Biomechanics in 2013. He has written three book chapters, co-authored 100+ peer-reviewed publications, conference proceedings and presentations, and received 16 patents, including patents involving hip replacements dating back to the 1980s. He currently runs his own consulting firm specializing in composite design and analysis, biomechanics of impact, structural design and analysis, and proposal writing.

With over 30 years of automotive engineering experience, this expert has dedicated his career to the field of accident reconstruction. Holding Masters and Doctoral degrees in automotive mechanical engineering and highway safety, he is a recognized expert whose clients have included U.S., State and Foreign Governments. He has extensive court experience, having been deposed and testified in approximately 200 trials, while he has acted as an automotive engineering consultant in more than 3,000 vehicle crash cases.

This expert has over 40 years of experience as a mechanical engineer. In addition to contributing to over 200 presentations in 38 countries, he has been extensively published in his field and is an established expert in forensic mechanical engineering. His expertise includes accident investigation and medical device liability. He now serves as a Senior Forensic Consultant for a biomechanics and biomedical engineering consulting firm.

This forensic engineering expert has practiced as an Engineering Consultant and Expert Witness since 1982. Testifying in City, County, State and Federal courts as a Mechanical Engineer, Automotive Engineer and Safety Engineer, he is known nationwide for his integrity, careful and thorough investigation of claims, expert analysis and professional courtroom presentation.

This highly qualified engineer has over 15 years of consumer products engineering experience. He has held many prestigious positions at such companies as Electrolux and General Electric and currently owns and is a lead engineer of a highly successful electronics design firm.

This expert is an independent safety consultant out of the UK. For the past 27 years, he has worked in a variety of engineering environments to ensure that UK/EU safety standards were upheld. He is familiar with the UK factory safety standards and product safe design standards and has the appropriate experience to help with this case. He has worked large engineering companies to ensure their compliance with the Health and Safety at Work Act, CE Marking Directives and PUWER.

This expert has over 40 years of experience as a mechanical engineer. His research in tribology, machining of advanced materials, medical device design, dental materials, and high temperature coatings is widely recognized in the scientific and engineering communities. He has published over two hundred fifty papers and reports related to machining of ceramics, mechanisms and mechanics of interfaces, wear and friction, boundary lubrication, and biotribology; and has given more than three hundred lectures on these subjects. He has served as President and CEO for a heart pump developer, a subsidiary for a product company where he served as Vice President of Biotechnology.

This highly qualified expert has a BS in engineering and an MS and PhD in civil engineering. He is a registered Professional Engineer and a former OSHA instructor. His current position as President of Engineering requires him to oversee the entire operations of his firm from an engineering and environmental perspective. He has extensive experience working with roll off dumpsters and construction.

This expert has an expertise in bicycle accident reconstruction with his extensive cycling experience and his education in human factors, biomechanics and engineering. He has experience analyzing a variety of bicycle issues such as rider behavior/bicycle safety, accident reconstruction, bicycle helmet component failure, and bicycle maintenance.

This expert has over 10 years of professional experience in OSHA & MSHA advisory services, specifically as it relates to hazardous materials management, oil & gas rig safety, environmental engineering, and fire safety. He earned a Master of Occupational Safety & Health/Environmental Management from Columbia Southern University and a PhD in Safety Sciences from Indiana University of Pennsylvania. He is a Certified Safety Professional through Board of Certified Safety Professionals and teaches field safety protocols for the NCCER Core curriculum. This expert is currently a professor of safety management & environmental/fire protection engineering at a Texas based university and a principal consultant providing OSHA & MSHA advisory services.

This highly qualified expert holds both a Bachelors and a Masters degree in Mechanical Engineering from the University of South Carolina where he was summa cum laude. He is a Certified Plant Engineer and a Certified Training Instructor for Aerial Work Platforms and Rough-Terrain Forklifts. He was enlisted in the United States Navy for 12 years where he was responsible for operating, repairing, and managing nuclear power plants and personnel. He has also served as Director of Engineering, Chief Engineer and has also held the position of Senior Design engineer responsible for manufacturing and new product development. Through his work experiences, he gained an extensive background in welding and fabrication of products and he manages his current company's product testing lab, specifically treestands and associated equipment. He is a member of the National Society of Professional Engineers, American Society of Mechanical Engineers, American Society of Civil Engineers and a Certified Fire Protection Specialist. He has also earned numerous Navy and Marine Corps medals.