Defective Medical Device Expert Witnesses in Oregon

This expert works as the vice president of engineering for a large fitness corporation. He has worked in the industry for over over thirty years, is familiar with industry trends, and is familiar with the history of numerous fitness products. He holds multiple patents for highly used fitness equipment and has published multiple articles on product safety/warning labels. He is chairman of the committee responsible for fitness industry standards and has authored or contributed to all standards published to date. He has worked on product liability cases for 34 years assisting both defense and plaintiffs attorneys.

This expert has been working as a mechanical engineer and testifying expert witness for over 30 years. He holds both an M.S. and Ph.D. in Mechanical Engineering from Stanford University and a BES from Georgia Tech. He is a Fellow of the American Society of Mechanical Engineers (ASME), a Senior Member of the Institute of Electrical and Electronics Engineers (IEEE), and a Member of SAE and ASM. This expert is a licensed Professional Mechanical Engineer (PE), providing expertise across a wide range of engineering topics and fields. He has deep experience in medical devices including cardiovascular, orthopedic, and spinal applications and applications of nitinol shape memory materials. He has experience as an Expert Witness, has testified in trial and deposition, and authored expert reports and IPR declarations. He works in patents and product failure analysis and forensics. He was previously Faculty in the Department of Mechanical Engineering at Santa Clara University as well as a Visiting Associate Professor in the Department of Mechanical Engineering at Stanford University.

This expert has over 30 years of experience in medical device development, specifically cardiovascular devices. He earned his BS in chemical engineering from Arizona State University and is a member of the International Society for Endovascular Specialists. This expert has a high level of clinical expertise for surgical, vascular and endovascular devices and procedures and is well versed in implantable device failure investigation and evaluation. He previously served as the president of Arizona Heart Innovative Technologies, LLC and as the vice president of research and development for Direct Flow Medical. He is currently the CEO of a medical device company in California that develops products to improve the quality of life for those with spinal cord injuries and disease.

This product design and liability expert has over 50 years of experience in mechanical engineering. He has devoted his entire career to the design, development, and commercialization of medical devices and similar consumer products, developing 5 patents along the way. He received his BS in mechanical engineering from California State Polytechnic College before obtaining his MBA from California State College. Formerly, he served as an engineer and department manager at California Injection Molding Co., a senior project engineer and the manufacturing engineer manager at McGaw Laboratories, the director of engineering at Hudson Oxygen Therapy Sales Co., and the president at Fallbrook Engineering Inc. Currently, he serves as the president of a consulting engineering services firm in Washington.

This Washington-based expert has over 20 years of experience in chemistry and medical device research, specializing in polymer synthesis, polymer characterization, analytical chemistry, medical device design and intellectual property management. He received his BES in chemistry and photographic sciences from St. Cloud State University before earning his PhD in polymer chemistry from the University of Southern California. He is active in his field as a member of the American Chemical Society, is a highly-published author on the topics of polymer chemistry and medical devices, and holds 65 patents that have enhanced the field of polymer chemistry. Previously, he has served as a polymer chemist and then a senior polymer chemist at Medtronic, an adjunct professor of polymer chemistry at the University of St. Thomas, and a senior scientist at DexCom Inc. He also formerly served as an associate professor and then a professor of chemistry, as well the assistant dean of the college of science and technology and the interim assistant vice president and dean of graduate studies at Bloomsburg University. Currently, he serves as the vice president of intellectual property at a technology research lab in WA.

This expert in material sciences and electrochemistry received his BA in bio-engineering from the University of Pittsburgh before studying medical device fabrication science and then obtaining his PhD in physics at the University of Melbourne. He has experience with medical devices such as neural stimulators, neural recorders, and chemical sensors. This expert has two approved patents and two pending patents relating to materials used for medical devices and has published 27 articles in his field. Formerly, he served as a Fulbright research fellow at the Center for Eye Research Australia, a medical devices scientist at the University of Melbourne, and an NIH postdoctoral research fellow at the University of Pennsylvania. Currently, this expert is a senior scientist at a medical device company in California. He is also a co-founder and the CTO of a medical device company that specializes in developing bio-stable materials for neuro-interface devices.

This expert has 25-plus years of Automotive Safety Research and Development, Accident Reconstruction, Concept Vehicle Design and Manufacture as a Scientist Engineer, Project Manager, Senior Project Engineer, Systems Engineer, (Design, Development, Manufacturing and Test Engineer). Qualified as a Motor Vehicle Accident Reconstruction and Bio-Mechanical Engineering Expert in Los Angeles, Orange, Riverside, Ventura, Kern, Alameda and San Bernardino Counties, Alaska, Iowa, Tennessee, Florida, Ohio, Idaho, Utah, Nevada, Arizona, Massachusetts and Texas. He has thirty-five years of Motor Vehicle Accident Reconstruction, Automobile and Motorcycle Product Defect, Forensic and Occupant Biomechanical Injury Analysis, Automotive Safety, Vehicle Design, Development, Manufacturing, Test Engineering and Patent Infringement analysis. This expert has extensive experience and knowledge of product defects in the following areas: Automobile, Truck, Motorcycle, Jet Ski, ATV, Snow Mobile, Golf Cart, Big Rig Truck cases: Involving airbags, seatbelts, seats, fuel system fires, transmission part-to-reverse, unintended acceleration, brakes, tires, axle failures, roof crush, side impact, roll propensity, vehicle handling dynamics, suspension and chassis, design and manufacturing defects.

This highly qualified expert specializes in engineering and regulatory affairs for medical device commercialization. She earned a BS in mathematics from Oregon State University and a MS in Medical Device and Diagnostic Engineering from the University of Southern California. This expert currently owns and operates her own medical device company where she prepares and submits FDA regulatory services 510k applications.