Batteries Expert Witnesses in New Mexico

This highly experienced biomedical engineer has directed comprehensive hospital-based biomedical engineering department at the largest medical center in the country, taught at both medical and technical post-secondary institutions, including the Baylor College of Medicine, West Virginia University, and a prominent Mexican university. He earned his undergraduate and graduate degrees in electrical engineering from West Virginia University. He is a licensed Professional Engineer and certified as a Clinical Engineer. He is member of technical standards writing bodies, and is widely published in his field and his expertise is frequently sought by hospitals, manufacturers, and litigators. He received numerous professional awards including the FDA Commissioner, Special Citation for protecting the public safety.

This expert is a world renowned Biomedical Engineer specializing in prosthetics. He received a BA in mathematics and a BAI in microelectronics and electrical engineering from Trinity College Dublin, Ireland, in 1983. After working as a control engineer in England, he moved to the USA and obtained his MS and PhD degrees in biomedical engineering from Northwestern University in Evanston, IL. He has extensive experience working with lower and upper limb prosthetics research. His recent research is focused on the development an artificial hand replacement capable of true dexterous manipulation for use by persons with upper-limb loss. He covers all aspects of the problem ranging from neural control and sensing, mechatronic design and development, novel actuator technologies, and clinical deployment of these systems. He is currently the Director of the Biomechatronics Development Laboratory at a university in CO. He is also a Research Healthcare Scientist for a VA Health Care System, and holds Research Associate Professor appointments in the Departments of Bioengineering and Physical Medicine & Rehabilitation.

This licensed engineer earned his BS in Electrical Engineering from the University of Missouri and is a certified fire & explosion investigator. He has held a number of electrical engineering and products safety positions throughout his career, specializing in EE, product development, technical management, design verification, advanced troubleshooting, and failure analysis. This expert is currently a Senior Professional Engineer at a private Engineering consultancy.

This expert specializes in electrical engineering issues, and has performed numerous investigations into fires caused/allegedly caused by electrical issues. His experience includes evaluation of electronics products and their failure modes to determine whether they adhered to relevant safety standards, including those established by Underwriters Laboratories and the Canadian Standards Association. He has also evaluated products and components for structural wiring compliance with the National Electric Code. His projects have included a wide array of products and components, including but not limited to electronics, appliances, HVAC/R, residential and commercial wiring, and battery failure analysis, with an emphasis on lithium ion battery chemistry. He is a licensed Professional Engineer in multiple states, and holds a Certified Fire and Explosion Investigator certification.

This well credentialed expert is a Professor and Distinguished Chair in Computer Science for a public university in Texas. He is also Professor Emeritus in the Department of Electrical and Computer Engineering at Cornell University, where he taught and performed research for 20 years. He has about 30 years of professional experience in communication networks, wireless communication, and wireless and mobile networks. The expert earned his Ph.D. in Electrical and Computer Engineering from Stanford University; he also has a B.S. in Electrical Engineering from Technion and an M.S. in the same field from Tel-Aviv University. He has headed the Wireless Networks Lab, an internationally recognized research group at Cornell. The expert has over 200 journal and conference publications. He has been granted 18 patents with 2 additional patents pending. He is a Fellow of the Institute of Electrical and Electronics Engineers (IEEE) and a member of the IEEE's Communications Society, as well as a member of the Association for Computing Machinery (ACM).

This expert in technical documentation and mechanical engineering has over 35 years of professional experience. He completed his AAS in electrical engineering and his BS in mechanical engineering from NEC and Texas Tech University. He is skilled in electrical, mechanical, hydraulic, HVAC power distribution, in addition to HTML SGML and other programs. Formerly, he has served as a technical writer at Allard, the director of content development at Zane Publishing, and a manager of technical publications at USDATA. Currently, this expert is a senior technical writer at a TX technical documentation firm.

This highly qualified expert has nearly 25 years of experience in electronic engineering. He received his BS in electrical engineering from the University of California Irvine before earning his PhD in electronics engineering and control systems at the University of Colorado. This expert is a licensed professional engineer. He is active in his field as a member of IEEE and currently holds 3 patents. He has formerly served as a principal engineer for ETO/ASTeX and NeoCore, as well as the chief architect for Xpriori and a researcher in the electrical and computer engineering department of Valdez International. Currently, this expert serves as the COO for an engineering consultancy in Colorado.

This highly qualified expert has 55 years of experience with semiconductors and over 15 years of experience with patents. He earned his BSEE from Rensselaer Polytechnic Institute with a focus on semiconductors. He completed advanced management courses through Raytheon and is a registered U.S. patent agent. This expert currently holds 4 patents and has published 4 technology books. For 20 years, he worked for a variety of companies in the technology industry in various positions. Most notably, he worked on military microelectronics for Martin-Marietta and Raytheon, was part of the adjunct faculty for Arizona State University, and specialized in semiconductors for Motorola. Currently, he is the president of a strategic technology consulting firm based in Colorado that he founded over 30 years ago.

This expert received his BS in electrical engineering from the University of Puerto Rico, graduating magna cum laude. He also earned a business marketing certificate from Collin Co Community College and completed the Bussmann consulting engineering training. He is a licensed professional engineer and has been a LEED accredited professional for over 10 years. He holds more than 20 years of experience in the design and construction of power distribution, lighting, fire alarms, and electrical safety issues. The projects he has worked on have involved city infrastructure, high and medium voltage substations, education facilities, and health care facilities. This expert currently is the senior electrical engineer of an electrical safety company in Texas.

This highly-qualified expert has over 20 years of experience in consumer electronics and retail business. He earned his BS in economics from the University of Texas at Austin. He is active in his field as a past chairman and current executive board member of the Consumer Technology Association, a member of the Young Presidents Organization, and a board member of the Anti-Defamation League's National Consumer Technology Board. This expert is a founder of a luxury brand retailer and custom installation company that has received numerous consumer electronics industry awards throughout the years.

This expert has been working in consumer electronics and electrical utilities for over 30 years, and has extensive experience with solar panels, electronics manufacturing, data analytics, semiconductor packaging, and portable electronic products. He earned BS and MS in mechanical engineering from the University of Wisconsin and the University of Rochester, respectively. He holds 4 patents including in low profile managed memory components and high-density electronic connectors. He formerly worked as a director of product marketing at Motion Computing and Staktek and as director of product development at Heliovolt. He also served as a chief technical officer at Pecan Street Incorporated. This expert is currently a chief technical officer and vice president of engineering at a solar energy start-up in CO.

This expert has 50 years of experience in the field of engineering and project management. He earned his BS in electrical engineering from Lamar University and previously served as a project manager at Foster Wheeler USA and ENGlobal Engineering. He also served as the Gulf Coast regional manager at Mustang Process & Industrial/PME and as a project director consultant at EuroPetro Consultants. He is currently an independent engineering consultant based in Texas.

This highly qualified Electrical Engineer and Optical Imaging expert earned a Ph.D in Optical Sciences from the University of Arizona. He is a Fellow of both the International Society of Optical Engineering and the Optical Society of America. He has won many awards throughout his career in recognition of his academic and research contributions. This expert has published over 75 peer-reviewed journal articles and has authored five textbooks. He is an authority in his field and is frequently invited to lecture as a guest speaker. He is the former President of an international society of optical engineering.

This expert is a registered professional engineer and certified journeyman electrician, belonging to such societies as the Association of Electrical Inspectors and the Institute of Electrical and Electronics Engineers. He has served as an electrician and electrical engineer on various projects over his 35+ year career, and is currently the president of a Forensic engineering consulting firm including Electrical, Mechanical, and Structural Engineers.